Evaluation of the degree of cross-linking of cellulose-based superabsorbent hydrogels: a comparison between different techniques

Three different techniques have been applied to the evaluation of the degree of cross-linking of superabsorbent cellulose-based hydrogels obtained from water solutions of carboxymethylcellulose sodium salt (CMCNa) and hydroxyethylcellulose (HEC), chemically cross-linked with divinyl sulfone. These polyelectrolyte hydrogels are biodegradable and have the same sorption capacity as acrylate-based superabsorbents on the market. A ¹³C solid state NMR analysis was carried out on dry samples of hydrogel to obtain the degree of cross-linking, an important parameter that affects the swelling and mechanical properties of a hydrogel. Dynamic mechanical analysis was performed during the hydrogel cross-linking using a parallel plate rheometer under oscillatory deformations in order to monitor the evolution of the hydrogel viscoelastic properties during the synthesis. The value of |G*| and the slope of the stress-deformation ratio plots from uniaxial compression tests were used to evaluate the elastically effective degree of cross-linking according to classical rubber elasticity theory. Moreover, a dynamic mechanical analysis was carried out on cross-linked hydrogels at different degrees of swelling in order to investigate the influence of the swelling on the mechanical properties and the application of rubber elasticity theory to swollen hydrogels.     

Modifying LnHPDO3A Chelates for Improved T1 and CEST MRI Applications

The new ligand HPDO3MA [(R,R,R,R)-10-(2-hydroxypropyl)-α,α′,α′′-trimethyl-1,4,7,10-tetraazacyclododecane-1,4,7-triacetic acid] was designed to combine and optimize the chemical properties of the macrocyclic ligands HPDO3A and DOTMA. The presence of the methyl groups on the acetic pendant arms of HPDO3A is expected to rigidify the structure of the ligand and favor an increase of the kinetic inertness of the Ln complexes. ¹H NMR spectra of Eu(HPDO3MA) displayed the presence of two pairs of diastereoisomers: SAP (square antiprismatic) and TSAP (twisted square antiprismatic) isomers (56 and 44 %, respectively). In addition, ¹H and ¹⁷O relaxometric NMR studies of Gd(HPDO3MA) showed approximately a 10 % increase in relaxivity and a faster water exchange rate with respect to Gd(HPDO3A). Moreover, a detailed chemical exchange saturation transfer (CEST) characterization of Yb(HPDO3MA) displayed a sensitivity about two times larger than that of Yb(HPDO3A) both in phantom and in cell labeling experiments. Finally, the kinetic inertness of Yb(HPDO3MA) was measured to be twice as high as that of Yb(HPDO3A), with a dissociation half-life at physiological pH of about 2500 years.     

Through-Space Spin Coupling in a Silver(II) Porphyrin Dimer upon Stepwise Oxidations: AgII⋅⋅⋅AgII,AgII⋅⋅⋅AgIII,and AgIII⋅⋅⋅AgIII Metallophilic Interactions

Metallophilic interactions between closed-shell metal ions are becoming a popular tool for a variety of applications related to high-end materials. Heavier d⁸ transition-metal ions are also considered to have a closed shell and can be involved in such interactions. There is no systematic investigation so far to estimate the structure and energy characteristics of metallophilic interactions in Ag^II/Ag^II (d⁹/d⁹), Ag^III/Ag^III (d⁸/d⁸), and mixed-valent Ag^II/Ag^III (d⁹/d⁸) complexes, which have been demonstrated in the present study. Both interporphyrinic and intermetallic interactions were investigated on stepwise oxidation by using a rigid ethene-bridged cis silver(II) porphyrin dimer and the results compared with those for highly flexible ethane-bridged analogues. By controlling the nature of chemical oxidants and their stoichiometry, both 1e and 2e oxidations were done stepwise to generate Ag^II/Ag^III mixed-valent and Ag^III/Ag^III porphyrin dimers, respectively. Unlike all other ethene-bridged metalloporphyrin dimers reported earlier, in which 2e oxidation stabilizes only the trans form, such an oxidation of silver(II) porphyrin dimer stabilizes only the cis form because of the metallophilic interaction. Besides silver(II) ⋅⋅⋅ silver(II) interactions in cis silver(II) porphyrin dimer, stepwise oxidations also enabled us to achieve various hitherto-unknown silver(II) ⋅⋅⋅ silver(III) and silver(III) ⋅⋅⋅ silver(III) interactions, which thereby allow significant modulation of their structure and properties. The strength of Ag ⋅⋅⋅ Ag interaction follows the order Ag^II/Ag^II (d⁹/d⁹)<Ag^II/Ag^III (d⁹/d⁸)<Ag^III/Ag^III (d⁸/d⁸). Single-crystal XRD, X-ray photoelectron spectroscopy (XPS), ¹H NMR and EPR spectroscopy, and variable-temperature magnetic investigations revealed various oxidation states of silver and metallophilic interactions, which are also well supported by computational analysis.     

Direct meta-C−H Perfluoroalkenylation of Arenes Enabled by a Cleavable Pyrimidine-Based Template

The development of efficient and mild methods for the synthesis of organofluorine compounds is of foremost interest in various fields of chemistry. A direct pyrimidine-based selective meta-C−H perfluoroalkenylation of arenes involving several commercially available perfluoroolefins is described. The synthetic versatility of the protocol is demonstrated by an extensive substrate scope including different benzylsulfonyl, alkylarene and phenylacetic acid scaffolds. The generality of this methodology including the meta-C−H perfluoroalkenylation of Ibuprofen, the facile cleavage of the directing group and gram-scale reactions are presented.     

1H-1H scalar coupling across two stacked aromatic rings: DFT calculations and experimental proof

1H-1H scalar coupling across two stacked (parallel and eclipsed) aromatic rings has been revealed through the 1D and 2D 1H NMR analysis of a [2,2]paracyclophane and rationalized by means of density functional theory (DFT) calculation of the J values.     

Mutual induced coordination in halogen-bonded anionic assemblies with (6,3) cation-templated topologies

We describe the use of halogen bonding for the deliberate construction of cation-templated anionic (6,3) networks thanks to a strategy based on the mutual induced fitting of the valences of the building blocks.     

To Sandwich Technetium: Highly Functionalized Bis-Arene Complexes [99mTc(η6-arene)2]+ Directly from Water and [99mTcO4]−

The labeling of (bio)molecules with metallic radionuclides such as ^99mTc demands conjugated, multidentate chelators. However, this is not always necessary since phenyl rings can directly serve as integrated, organometallic ligands. Bis-arene sandwich complexes are generally prepared by the Fischer–Hafner reaction. In extension of this, we show that [^99mTc(η⁶-C₆R₆)₂]⁺-type complexes are directly accessible from water and [^99mTcO₄]⁻, even using arenes incompatible with Fischer–Hafner conditions. To unambiguously confirm the nature of these unprecedented ^99mTc complexes, their rhenium homologous have been prepared by substituting naphthalene ligands in [Re(η⁶-C₁₀H₈)₂]⁺ with the corresponding phenyl groups. The ease with which highly stable [^99mTc(η⁶-C₆R₆)₂]⁺ complexes are formed under standard labeling conditions enables a multitude of new potential imaging agents based on commercial pharmaceuticals or lead structures.     

An alternative approach for the calculation of correlation energy in periodic systems: a hybrid MP2(B3LYP) study of the He-MgO(100) interaction

A practical and efficient method for exploiting second order Rayleigh-Schr?dinger perturbation theory to approximate the correlation energy contribution to the London dispersion interaction is presented. The correlation energy is estimated as the M?ller-Plesset contribution computed using single particle orbitals from hybrid exchange density functional theory as the reference state.     

Models for biological trinuclear copper clusters. Characterization and enantioselective catalytic oxidation of catechols by the copper(II) complexes of a chiral ligand derived from (S)-(-)-1,1'-binaphthyl-2,2'-diamine

The dinuclear and trinuclear Cu(II) complexes of an octadentate ligand derived from (S)-1,1'-binaphthyl-2,2'-diamine have been prepared and characterized by UV/Vis, CD, EPR and NMR spectroscopy. The ligand contains two tridentate aminobis(benzimidazole) donor arms connected to a central bidentate diaminobinaphthyl linker, which hosts the chiral unit. In the dinuclear Cu complex the ligation occurs essentially within the tridentate arms of the ligand. The two Cu centers are EPR nonequivalent and noninteracting. The EPR data suggests that one of the Cu ions additionally interacts with one of the tertiary aminonaphthyl donors. In the trinuclear complex the two aminonaphthyl donors bind the third Cu ion. The EPR spectrum of this complex shows the signal for a mononuclear Cu(II) center bound to a tridentate arm, while the remaining two Cu(II) centers are coupled through hydroxo groups. The CD spectrum shows that in the free ligand a severe reduction of the dihedral angle between the naphthyl groups from the strain free range occurs. This conformation is stabilized by ring stacking interactions with the benzimidazole groups. On complex formation this interaction is removed because the benzimidazole groups are involved in metal binding. In the dinuclear Cu complex the conformation of the binaphthyl chromophore probably approaches the strain free range, while in the trinuclear Cu complex a marked flattening of the dihedral angle between the two naphthyl rings occurs. Both complexes are active catalysts in the oxidation of L-/D-Dopa derivatives to quinones. High enantioselectivity is observed in the oxidation of L-/D-Dopa methyl ester catalyzed by the dinuclear Cu complex, which exhibits strong preference for the d enantiomer. The enantioselectivity is largely lost for the trinuclear Cu complex.     

Is styrene planar in liquid phases?

The proton NMR spectra of two (13)C-labeled isotopomers of styrene dissolved in two liquid crystalline solvents have been obtained and analyzed to yield four sets each of 24 dipolar couplings. These couplings were then used to investigate the structure of the ring and the ene fragments of the molecule, and the position of the maximum, phi(0), in the ring-ene bond rotational probability distribution. To do this, the effect on the dipolar couplings of small-amplitude vibrational motion was taken into account using vibrational wave functions calculated by molecular orbital and density functional methods. It is concluded that the NMR data are consistent with the ring fragment, averaged over the ring-ene rotation, planar, while the ene fragment is not. The value of phi(0) is found to be 18.0 degrees +/-0.2 degrees for the two solutions, compared with a value of 27 degrees calculated by the molecular method MP2/6-31G(*).