CHEMILUMINESCENCE FROM THE OXIDATION OF AUXIN DERIVATIVES

Abstract— The thiophenyl ester of indole-3-acetic acid and indole-3-acetonitrile produce chemiluminescence in aerated dimethylsulfoxide in the presence of potassium t -butoxide. The emitter is the aromatic aldehyde. In the case of acetonitrile, the other product expected from the cleavage of an intermediate dioxetane, cyanate/isocyanate, has also been identified. Other auxins also chemiluminesce under similar conditions, but the emitters have not been properly identified.
These systems are models for the peroxidase catalyzed oxidation of indole-3-acetic acid to indole-3-carboxaldehyde and as such support the earlier inference (Vidigal et al , 1975) that the excited aldehyde is generated in the enzymic process.
An additional result is the observation of an exciplex between excited indole-3-carboxaldehyde and the thiophenylester of indole-3-acetic acid. This appears to be the first case of chemical generation of an exciplex by a route other than radical ion reaction, presumably by the dioxetane route.     

Shape recognition of alkylammonium ions by 1,3-bridged calix[5]arene crown-6 ethers: endo- vs exo-cavity complexation

A series of tri-O-substituted 1,3-bridged calix[5]arene crown-6 ethers bearing alkyl, arylalkyl, alkoxyalkyl, and alkoxycarbonylmethyl residues at the lower rim and either (t)()Bu or H substituents at the upper rim have been synthesized. (1)H NMR studies have shown that p-tert-butylcalix[5]crowns, irrespective of the size and nature of their lower rim pendant groups, adopt preorganized conelike conformations, whereas p-H-calix[5]crowns with bulky substituents preferentially exist in solution as partial cone conformers (C(1) symmetry). Calix[5]crown derivatives behave as mono- or ditopic receptors for isomeric butylammonium ions, forming endo-cavity (inside the calixarene cup) and/or exo-cavity (at the crown ether moiety) 1:1 complexes according to the shape of the guest. These two binding modes can be clearly distinguished and monitored by (1)H NMR titration experiments.     

Effect of some organic solvents and acids on the laser-induced atomic fluorescence of tin in air-hydrogen flames

The effects of some organic solvents and acids on the atomic fluorescence of tin in air-hydrogen flames have been examined. Ketones and alcohols greatly reduced the florescence sensitivity in fuel rich air-hydrogen flame whereas organic acids generally enhanced the fluorescence signal. The depressive effect of organic solvents was found to be highly dependent on the fuel to oxidant ratio in the flame. An attempt has been made to explain these effects, on the basis of possible reactions occurring in the flame.On leave from Institute of Chemistry, University of the Punjab, Lahore 54590, PakistanOn leave from Department of Analytical Chemistry, University of Zaragoza, Zaragoza, Spain     

Relationship between cohesive energy density and hydrophobicity

It has been recently claimed that the large cohesive energy density of water is the ultimate cause of the poor solubility of nonpolar compounds in water. In order to test the validity of this idea, we analyze the difference in solubility between light water and heavy water of several nonpolar compounds. Even though the cohesive energy density of D(2)O is larger than that of H(2)O, nonpolar compounds are slightly more soluble in D(2)O than H(2)O. In such case experimental data do not support the correctness of the large cohesive energy density as the ultimate cause of hydrophobicity. We show that D(2)O is a slightly better solvent than H(2)O for nonpolar compounds because it is slightly less costly to create a cavity in the former liquid. This is because there is slightly more void volume in heavy water than in light water.     

INTERACTION OF ENZYME-GENERATED SPECIES WITH CHLOROPHYLL-a AND PROBES BOUND TO SERUM ALBUMINS

Abstract— The interaction of serum albumin-bound acceptors with enzyme-generated and protected triplet species was studied in two types of systems. Chlorophyll-a bound to bovine and human serum albumins is efficiently excited by enzymatically generated triplet acetone and acetaldehyde. When the Chl-a concentration is much lower than that of the albumin the interaction occurs with chlorophyll in an aggregate in which one Chl-a is surrounded by several protein molecules. When the Chl-a concentration is higher than that of the protein, the aggregate contains the proteins and fluorescent chlorophylls in a 1:1 ratio. The excess chlorophylls, although able to interact with the donors, are not fluorescent.
In another study, probes bound to various specific sites of serum albumins were used as quenchers of the enzymatically generated triplet acetone. The efficiency of quenching by all the bound probes is equal and in one case even stronger than for the free probes.
A model for the interaction of the excited species contained in the enzyme with the acceptor(s) located in the protein is proposed.
The present results provide further evidence that enzyme-generated and protected triplet carbonyl species can interact through a collisional process with acceptors bound to or constituents of macromolecules.     

Nickel-Ruthenium Mixed-Metal Carbonyl Clusters Syntheses and Solid State Structures of the Two Tetrahedral Clusters [PPh4][NiRu3(μ3 H)(CO)9(μ-CO)3] and [NEt4]2[NiRu3(CO)8(μ-CO)4]

Redox condensation of [Ru₃H(CO)₁₁]- with Ni(CO)₄, in tetrahydrofuran solution, under a nitrogen atmosphere, yields the tetranuclear anion [NiRu_H(CO)₁₁)-. Subsequent deprotonation with Bu'OK in acetonitrile solution leads to the formation of the related dianion. Both anions have been characterized by spectroscopic techniques, elemental analysis and single crystal X-ray diffraction. [PPh₄][NiRu₃H(CO)₁₂] crystallizes in the triclinic space group PI with unit cell dimensionsof a = 11.842(2) Å,b = 12.335(3) Å, c = 13.3080) Å,a = 91.89(2)°, = 93.35(1)°,y = 96.41(2)°, Z = 2, V= 1926.9(7) Å'. The NiRu₃, metal core of the molecule defines a distorted tetrahedron with nine terminal and three edge bridging carbonyl groups. The hydrido ligand was located by difference Fourier techniques and was found to bridge the NiRu₂ basal triangle at a distance of 0.88(6) A from this plane. Selected average distances and angles are: Ru-Ru = 2.839 Å, Ru-Ni = 2.640 Å, Ru-C, = 1.910 A,Ru-C _b = 2.084 Å, Ni-C _b = 2.022 Å, Ru-H = 1.77 Å, C-0, = 1.135 Å, C-O _b = 1.159 Å, M-C-O, = 176.3°,M-C--O _b = 139.3°;other distances are: Ni-C₁ = l.758(7) Å, Ni-H= 1.85(7) Å. [NEt₄]₂[NiRu₃(CO)₁₂] crystallizes in the orthorhombic space group Pnma (no. 62) with unit cell dimensions ofa=20.247(5) Å,b = 15.038(4)Å,c = 12.079(3) Å, Z=4, V=3678(2) A'. The molecule contains a tetrahedral NiRu₃ core with eight terminal and four edge bridging carbon monoxide groups which bridge the three Ni-Ru and one Ru-Ru bond. Average distances and angles are: Ru -Ru =2.3050A Ru-Ni 2.648 Å, Ru-C _t = 1.878 Å, Ru-C _b 2.045 Å, Ni-C _b = 2.055 Å, C-O _t = 1.145 Å, C-01,=1.157 Å, M-C-O,= 176.9°, M-C-O _b = 138.6°; other distance is: Ni-C _t = 1.754(10) Å,t = terminal,b = bridging.     

Novel bifluorene based conjugated systems: synthesis and properties

A series of novel bifluorene based systems was synthesised by a convergent approach by means of a Suzuki cross-coupling between 7,7′-bis-(4,4,5,5-tetramethyl-[1,3,2]dioxaborolan-2-yl)-9,9,9′,9′-tetraoctyl-2,2′-bifluorene and suitable aryl-bromides. All the oligomers have been characterized by ¹H, ¹³C NMR, FT-IR, UV-vis, PL spectroscopy and mass analyses. In particular, it has been demonstrated that the presence of strong electron donor (amines) or withdrawing (carboxylic esters) groups causes a bathochromic shift of the optical properties with respect to those of unsubstituted molecules. The effects of these functional groups on the HOMO-LUMO energy levels were investigated by cyclic voltammetry. Remarkably, the LUMO energy level of 7,7′-bis-[5′-carbodecaoxy-2,2′-bithiophen-5-yl]-9,9,9′,9′-tetraoctyl-2,2′-bifluorene (−3.07 eV) is strongly influenced by the presence of the ester functional group.     

Ambiphilic boryl groups in a neutral Ni(ii) complex: a new activation mode of H2

The concept of metal–ligand cooperation opens new avenues for the design of catalytic systems that may offer alternative reactivity patterns to the existing ones. Investigations of this concept with ligands bearing a boron center in their skeleton established mechanistic pathways for the activation of small molecules in which the boron atom usually performs as an electrophile. Here, we show how this electrophilic behavior can be modified by the ligand trans to the boron center, evincing its ambiphilic nature. Treatment of diphosphinoboryl (PBP) nickel–methyl complex 1 with bis(catecholato)diboron (B₂Cat₂) allows for the synthesis of nickel(ii) bis-boryl complex 3 that promotes the clean and reversible heterolytic cleavage of dihydrogen leading to the formation of dihydroborate nickel complex 4. Density functional theory analysis of this reaction revealed that the heterolytic activation of H₂ is facilitated by the cooperation of both boryl moieties and the metal atom in a concerted mechanism that involves a Ni(ii)/Ni(0)/Ni(ii) process. Contrary to 1, the boron atom from the PBP ligand in 3 behaves as a nucleophile, accepting a formally protic hydrogen, whereas the catecholboryl moiety acts as an electrophile, receiving the attack from the hydride-like fragment. This manifests the dramatic change in the electronic properties of a ligand by tuning the substituent trans to it and constitutes an unprecedented cooperative mechanism that involves two boryl ligands in the same molecule operating differently, one as a Lewis acid and the other one as a Lewis base, in cooperation with the metal. In addition, reactivity towards different nucleophiles such as amines or ammonia confirmed the electrophilic nature of the Bcat moiety, allowing the formation of aminoboranes.

A bis(boryl)nickel complex promotes the facile and reversible activation of H₂ through a cooperative mechanism that involves the metal and both boryl moieties in a concerted five-center process.     

High-performance liquid chromatographic determination of Levetiracetam in human plasma: comparison of different sample clean-up procedures

An accurate and precise high-performance liquid chromatographic method using diode array detection for the determination of the novel antiepileptic, Levetiracetam, has been developed. Three clean-up procedures for the analysis of Levetiracetam in human plasma were implemented and evaluated, namely solid-phase extraction, deproteinization by addition of organic solvents and formation of insoluble salts. Adenosine was used as the internal standard for all three sample pretreatment procedures. Among the several cartridges used for solid-phase extraction, the hydrophilic-lypophilic balance (Oasis) HLB) phase provides the best extraction yield of Levetiracetam, together with high precision. With the two other clean-up procedures involving plasma deproteinization by addition of methanol or zinc sulphate, lower sensitivity and precision of the assays were obtained. However, they are cheaper and faster when compared with the solid-phase extraction procedure.