High-performance liquid chromatography with post-column derivatisation and fluorescence detection for sensitive determination of aflatoxin M1 in milk and cheese

A new HPLC method with fluorescence detection using pyridinium hydrobromide perbromide as a post-column derivatising agent has been developed to determine aflatoxin M1 in milk and cheese. The detection limits were 1 ng/kg for milk and 5 ng/kg for cheese. The calibration curve was linear from 0.001 to 0.1 ng injected. The method includes a preliminary C18-SPE clean-up and the average recoveries of Aflatoxin M1 from milk and cheese, spiked at levels of 25-75 ng/kg and 100-300 ng/kg, respectively, were 90 and 76%; the precision (RSDr) ranged from 1.7 to 2.6% for milk and from 3.5 to 6.5% for cheese. The method is rapid, easily automatable and therefore useful for accurate and precise screening of aflatoxin M1 in milk and cheese.     

High-performance liquid chromatographic determination of Levetiracetam in human plasma: comparison of different sample clean-up procedures

An accurate and precise high-performance liquid chromatographic method using diode array detection for the determination of the novel antiepileptic, Levetiracetam, has been developed. Three clean-up procedures for the analysis of Levetiracetam in human plasma were implemented and evaluated, namely solid-phase extraction, deproteinization by addition of organic solvents and formation of insoluble salts. Adenosine was used as the internal standard for all three sample pretreatment procedures. Among the several cartridges used for solid-phase extraction, the hydrophilic-lypophilic balance (Oasis) HLB) phase provides the best extraction yield of Levetiracetam, together with high precision. With the two other clean-up procedures involving plasma deproteinization by addition of methanol or zinc sulphate, lower sensitivity and precision of the assays were obtained. However, they are cheaper and faster when compared with the solid-phase extraction procedure.     

Cu+(H2) and Na+(H2) adducts in exchanged ZSM-5 zeolites

Cu(I) ions in Cu-ZSM-5 form Cu+(H2) complexes, stable at room temperature and sub-atmospheric H2 pressure, which do not have any homogeneous analogue except for matrix-isolated [Cu(eta2-H2)Cl]. Comparison with the unstable Na+(H2) adducts formed in the parent Na-ZSM-5 zeolite allow the conclusion that the Cu(I)/H2 bond is governed by sigma-pi overlap forces.     

Two thiourea‐containing gold(I) complexes

The crystal structures of two salts of bis­(thio­urea)­gold(I) complexes, namely bis­(thio­urea‐κS)­gold(I) chloride, [Au(CH₄N₂S)₂]Cl, (I), and bis­[bis­(thio­urea‐κS)­gold(I)] sulfate, [Au(CH₄N₂S)₂]₂SO₄, (II), have been determined. The chloride salt, (I), is isomorphous with the corresponding bromide salt, although there are differences in the bonding. The Au^I ion is located on an inversion centre and coordinated by two symmetry‐related thio­urea ligands through the lone pairs on their S atoms [Au—S 2.278 (2) Å and Au—S—C 105.3 (2)°]. The sulfate salt, (II), crystallizes with four independent [Au(CH₄N₂S)₂]⁺ cations per asymmetric unit, all with nearly linear S—Au—S bonding. The cations in (II) have similar conformations to that found for (I). The Au—S distances range from 2.276 (3) to 2.287 (3) Å and the Au—S—C angles from 173.5 (1) to 177.7 (1)°. These data are relevant in interpreting different electrochemical processes where gold–thio­urea species are formed.     

Investigations of chromium(III), manganese(III), tin(II) and lead(II) dithiocarbamate complexes

Piperidine-, morpholine-4-, N-methylpiperazine-4- and thiornorpholine-4-carbodithioate complexes of chromium(III), manganese(III), tin(II) and lead(II) are prepared and characterized by chemical analyses, spectroscopic methods (I.R. and electronic spectra), magnetic susceptibilities, conductivity measurements and mass spectra. The complexes are of the type M(R₂dtc)n, where n is the oxidation number of the metal ion. Where possible a tentative stereochemistry of the complexes is discussed on the basis of the results obtained. In all the complexes the dithiocarbamate ligands show bidentate behaviour.     

Is styrene planar in liquid phases?

The proton NMR spectra of two (13)C-labeled isotopomers of styrene dissolved in two liquid crystalline solvents have been obtained and analyzed to yield four sets each of 24 dipolar couplings. These couplings were then used to investigate the structure of the ring and the ene fragments of the molecule, and the position of the maximum, phi(0), in the ring-ene bond rotational probability distribution. To do this, the effect on the dipolar couplings of small-amplitude vibrational motion was taken into account using vibrational wave functions calculated by molecular orbital and density functional methods. It is concluded that the NMR data are consistent with the ring fragment, averaged over the ring-ene rotation, planar, while the ene fragment is not. The value of phi(0) is found to be 18.0 degrees +/-0.2 degrees for the two solutions, compared with a value of 27 degrees calculated by the molecular method MP2/6-31G(*).     

Synthesis of 2-(p-R-benzoylmethylene)-3-(p-R-phenyl)-1H-quinoxalines

The reaction of 1,2-diaminobenzenes with substituted 1,2-dibenzoyl-1,2-dibromoethanes constitutes a convenient synthetic route to the hitherto 2-(p-R-benzoylmethylene)-3-(p-R-phenyl)-1H-quinoxalines. Structures of all products were elucidated by ir, ¹H and ¹³C-nmr, mass spectra data. X-Ray crystallography data confirm assigned structures.     

Proton controlled intramolecular communication in dinuclear ruthenium(II) polypyridine complexes

The synthesis and characterization of two dinuclear ruthenium polypyridyl complexes based on the bridging ligands 5,5'-bis(pyridin-2' '-yl)-3,3'-bis(1H-1,2,4-triazole) and 5,5'-bis(pyrazin-2' '-yl)-3,3'-bis(1H-1,2,4-triazole) and of their mononuclear precursors are reported. The dinuclear compounds have been prepared by a Ni(0) catalyzed coupling of a mononuclear ruthenium(II) polypyridyl complex containing a brominated triazole moiety. Electrochemical and photophysical studies indicate that, in these dinuclear complexes, the protonation state of the bridge may be used to tune the intercomponent interaction between the two metal centers and that these species act as proton driven three-way molecular switches that can be read by electrochemical or luminescence techniques.     

Effect of cyclodextrins on physico-chemical and release properties of Eudragit RS 100 microparticles containing glutathione

The objective of this work was to develop a novel microparticulate system based on the mucoadhesive polymer Eudragit-RS 100 and cyclodextrins (CDs), potentially useful for the oral administration of Glutathione (γ–glutamylcysteinylglycine, GSH). For this purpose, an oil-in-oil (O/O) emulsion-solvent evaporation method was used for the preparation of microparticles (MPs) containing GSH alone or together with one of the following CDs: α-, β-, γ-, methyl-β-(Me-β-), hydroxypropyl-β-(HP-β-) or sulfobutylether-β-cyclodextrin (SBE_7m-β-CD). MPs were obtained by emulsifying a mixture of Eudragit RS 100, GSH, CD and magnesium stearate in acetone or acetonitrile with a mixture of liquid paraffin and Span 80. Size, encapsulation efficiency, and drug release of the prepared MPs were evaluated. The results clearly indicated that all the examined properties were dependent on the water-miscible solvents and CD used. In particular, MPs prepared by using acetone or acetonitrile showed different size distributions with mean diameters in the ranges 82–350 and 15–22 μm, respectively. Moreover, encapsulation efficiency values were found to be high in all cases (71–99%) and was significantly affected by the CD type. The GSH release rates were evaluated employing dissolution media with different pH values (1.2, 6.8 and 7.4) and the following rank order was obtained for MPs prepared using acetone: MPs incorporating Me-β-CD > MPs without CD > MPs incorporating the remaining CDs. On the other hand, MPs prepared using acetonitrile gave the highest GSH release rate. Finally, stability of GSH encapsulated in MPs containing HP-β-CD to enzymatic attack by pepsin A, α-chymotrypsin, and γ-glutamyltranspeptidase was also investigated.     

Model reactions for stereochemistry of Ziegler-Natta polymerization: Asymmetric hydroisomerization of α-olefins by chiral titanium tetra-alkoxides/tri-isobutyl aluminum catalytic systems

Homogeneous catalytic systems based on optically active low-molecular-weight and macromolecular titanium alcoholates and tri-isobutyl aluminum were used in the isomerization and hydrogenation of chiral and prochiral olefins. The reactions performed in a nitrogen and hydrogen atmosphere show a different behavior in regard to reaction rate, composition of reaction mixture, and stereochemical control. The catalyst based on macromolecular titanium alcoholate displays lower activity and a varying influence on the stereochemical pathway with respect to the catalysts based on low- molecular-weight alcoholates. The data obtained in both cases strongly support the absence of a stereocontrol by the growing chain in the stereoelective polymerization of racemic α-olefins by Ziegler-Natta catalysts based on optically active precursors. Finally evidence is provided in favor of the intermediate step responsible for asymmetric isomerization which does not occur via η-allyl complex.