Compression of Self‐Assembled Nano‐Objects: 2D/3D Transitions in Films of (Perfluoroalkyl)Alkanes—Persistence of an Organized Array of Surface Micelles

Understanding and controlling the molecular organization of amphiphilic molecules at interfaces is essential for materials and biological sciences. When spread on water, the model amphiphiles constituted by C_nF_2n+1C_mH_2m+1 (FnHm) diblocks spontaneously self‐assemble into surface hemimicelles. Therefore, compression of monolayers of FnHm diblocks is actually a compression of nanometric objects. Langmuir films of F8H16, F8H18, F8H20, and F10H16 can actually be compressed far beyond the “collapse” of their monolayers at ～30 Ų. For molecular areas A between 30 and 10 Ų, a partially reversible, 2D/3D transition occurs between a monolayer of surface micelles and a multilayer that coexist on a large plateau. For A<10 Ų, surface pressure increases again, reaching up to ～48 mN m^?1 before the film eventually collapses. Brewster angle microscopy and AFM indicate a several‐fold increase in film thickness when scanning through the 2D/3D coexistence plateau. Compression beyond the plateau leads to a further increase in film thickness and, eventually, to film disruption. Reversibility was assessed by using compression–expansion cycles. AFM of F8H20 films shows that the initial monolayer of micelles is progressively covered by one (and eventually two) bilayers, which leads to a hitherto unknown organized composite arrangement. Compression of films of the more rigid F10H16 results in crystalline‐like inflorescences. For both diblocks, a hexagonal array of surface micelles is consistently seen, even when the 3D structures eventually disrupt, which means that this monolayer persists throughout the compression experiments. Two examples of pressure‐driven transformations of films of self‐assembled objects are thus provided. These observations further illustrate the powerful self‐assembling capacity of perfluoroalkyl chains.     

The multivariate coefficient of variation for comparing serum protein electrophoresis techniques in external quality assessment schemes

External quality assessment (EQA) schemes are national or transnational programmes designed to control the analytical performance of clinical laboratories and to maintain inter-laboratory variability within acceptable limits. In such EQA programmes, participants are usually grouped by the type of assay technique/equipment they use. The coefficient of variation (CV) is a simple tool for comparing the inter-laboratory reproducibility of such techniques: the lower the CV, the better the analytical performance. Serum protein electrophoresis, a laboratory test profile consisting of five fractions (albumin, α ₁, α ₂, β and γ globulins) summing up to 100% of total proteins, can also be assayed in different ways depending on the media or the analytical principle. We propose a multivariate CV for comparing the performance of electrophoretic techniques in EQA, thus extending the univariate CV concept. First, the compositional nature of electrophoretic data requires a one-to-one transformation from the five-dimensional to the four-dimensional space. Next, robust estimations of the mean and the covariance matrix are needed to avoid the effect of outliers. The new approach is illustrated on electrophoretic datasets from the French and Belgian national EQA programmes.     

An expanded halogen bonding scale using astatine

As a non-covalent interaction, halogen bonding is now acknowledged to be useful in all fields where the control of intermolecular recognition plays a pivotal role. Halogen-bond basicity scales allow quantification of the halogen bonding of referential donors with organic functional groups from a thermodynamic point of view. Herein we present the pK_BAtI basicity scale to provide the community an overview of halogen-bond acceptor strength towards astatine, the most potent halogen-bond donor element. This experimental scale is erected on the basis of complexation constants measured between astatine monoiodide (AtI) and sixteen selected Lewis bases. It spans over 6 log units and culminates with a value of 5.69 ± 0.32 for N,N,N′,N′-tetramethylthiourea. On this scale, the carbon π-bases are the weakest acceptors, the oxygen derivatives cover almost two-thirds of the scale, and sulphur bases exhibit the highest AtI basicity. Regarding the applications of ²¹¹At in targeted radionuclide therapy, stronger labelling of carrier agents could be envisaged on the basis of the pK_BAtI scale.

Based on the halogen bonding between astatine monoiodide (AtI) and 16 Lewis bases, the newly established pK_BAtI scale indicates that the halogen bond basicity of AtI follows the order C ≤ O ≤ S ≈ Se for the acceptor atomic site.     

Electron transfer through clay monolayer films fabricated by the Langmuir-Blodgett technique

Hybrid films composed of amphiphilic molecules and clay particles were constructed by the modified Langmuir-Blodgett (LB) method. Clays used were sodium montmorillonite (denoted as mont) and synthetic smectite containing Co(II) ions in the octahedral sites (denoted as Co). Two kinds of amphiphilic molecules were used-[Ru(dC(18)bpy)(phen)2](ClO4)2 (dC(18)bpy = 4,4'-dioctadecyl-2,2'-bipyridyl and phen = 1,10-phenanthroline) (denoted as Ru) and octadecylammonium choloride (ODAH+Cl- or denoted as ODAH). Three kinds of hybrid films (denoted as Ru-mont, Ru-Co, and ODAH-Co films) were prepared by spreading an amphiphilic molecule onto an aqueous suspension of a clay. Atomic force microscopy (AFM) analyses of the films deposited on silicon wafers indicated that closely packed films were obtained at 20 ppm for all the above three cases. Cyclic voltammetry (CV) was measured on an ITO electrode modified with a hybrid film or a monolayer film of pure Ru(II) complex salt (denoted as Ru film). The Ru(II) complexes incorporated in the Ru-mont film lost their redox activity, indicating that montmorillonite layers acted as a barrier against electron transfer. In contrast, the same complexes in the Ru-Co film were electrochemically active with the simultaneous appearance of the redox peaks due to the Co(II)/Co(III) (or Co(II)/Co(IV)) couple. The results implied that electron transfer through cobalt clay layers was possible via mediation by Co(II) ions in a clay sheet. For an aqueous solution containing nitrite ions (NO2-) at pH 3.0, a large catalytic oxidation current was observed for both the electrodes modified with the Ru-mont and Ru-Co films. The results were interpreted in terms of the mechanisms that the charge separation of an incorporated Ru(II) complex took place to produce a pair of a Ru(III) complex and an electron and that the generated Ru(III) complex was reduced by a nitrite ion before it recombined with the electron.     

Molecularly imprinted polymers for the clean-up of a basic drug from environmental and biological samples

A molecularly imprinted polymer (MIP) was synthesized and evaluated to selectively extract an alpha-blocker, i.e. alfuzosin, from human plasma. The synthesis of the MIP was performed in dichloromethane with methacrylic acid as monomer and the target drug as template. A first series of experiments was carried out in dichloromethane to estimate the potential of the MIP in its specific recognition medium, i.e. dichloromethane, by developing a selective procedure and by measuring the capacity of the sorbent. An optimized procedure was developed for the selective extraction of alfuzosin with a recovery close to 100% in this medium and a specific capacity of 1.3 micromol g(-1) of MIP was measured. A study in aqueous media was also carried out by a comprehensive approach of the retention mechanism in order to build a selective procedure of extraction. The effects of the amount and of the charge of cations were studied and an optimal pH value was defined to limit matrix effects. Then, the alfuzosin MIP was then directly used to selectively extract the target drug from human plasma with an extraction recovery of 60%. Lastly, a soil was extracted by a pressurized solvent and the resulting extract was cleaned up on the MIP, showing the possibility to use this selective sorbent for the sample treatment of various complex matrices.     

Extraction of lanthanides from aqueous solution by using room-temperature ionic liquid and supercritical carbon dioxide in conjunction

For the first time, the study of a three-step extraction system of water/ionic liquid/supercritical CO2 has been performed. Extraction of trivalent lanthanum and europium from an aqueous nitric acid solution to a supercritical CO2 phase via an imidazolium-based ionic liquid phase is demonstrated, and extraction efficiencies higher than 87 % were achieved. The quantitative extraction is obtained by using different fluorinated beta-diketones with and without the addition of tri(n-butyl)phosphate. The complexation phenomenon occurring in the room-temperature ionic-liquid (RTIL) phase was evidenced by using luminescence spectroscopy.     

Homodyne detection readout for bit-oriented holographic memories

Homodyne detection is proposed to increase the readout signal of bit-oriented holographic memories. It can be easily implemented on present memory architectures by making the diffracted signal interfere with a reflection of the reading beam. The large resulting increase of the readout signal can be used to enhance the data transfer rate. A first experimental demonstration of such a readout procedure is presented.     

Submicrometer digital in-line holographic microscopy at 32 nm with high-order harmonics

Soft-x-ray digital in-line microscopic holography is achieved using a fully coherent high-order harmonic source emitting at 32 nm. Combination of commercial-grade soft-x-ray optics and a back-illuminated CCD detector allows a compact and versatile holographic setup. Different experimental geometries have been tested by imaging calibrated 50 nm tips and 1 microm wires. Spatial resolution of 800 nm is measured with magnifications ranging from 30 to 110 and a numerical aperture around 0.01. Finally, the potentiality of three-dimensional numerical reconstruction from a single hologram acquisition is shown experimentally.     

On the diameter of the Banach-Mazur set

On every subspace of l _∞(ℕ) which contains an uncountable ω-independent set, we construct equivalent norms whose Banach-Mazur distance is as large as required. Under Martin’s Maximum Axiom (MM), it follows that the Banach-Mazur diameter of the set of equivalent norms on every infinite-dimensional subspace of l _∞(ℕ) is infinite. This provides a partial answer to a question asked by Johnson and Odell.     

Handheld calculators between instrument and document

The new generations of handheld calculators can be considered either as mathematical tools with opportunities for calculation and representation or as a part of the teachers’ and students’ sets of resources. Framed by the Theory of Didactical Situations and the documentational approach, we take advantage of a particular experiment on introducing complex calculators in scientific classes to investigate the position and the role of this handheld technology both for students and teachers. The results show how different functionalities can be shared among teachers and students, but also how other functionalities remain private and may even conflict with the teacher’s intentions.