Effect of ethanol on micellization and on decarboxylation of 6-nitrobenzisoxazole-3-carboxylate in aqueous cationic micelles

The effects of ethanol on the critical micellar concentration (cmc) and the rates of decarboxylation of 6-nitrobenzisoxazole-3-carboxylate (6-NBIC) have been investigated in aqueous cationic surfactants of the cetyltrialkylammonium family with bromide [CT(R)ABr], chloride [CT(R)ACl], and nitrate [CT(R)ANO3] counterions, and methyl (CTAX), n-propyl (CTPAX), and n-butyl (CTBAX) as the head group alkyl moieties. Effects upon cmc and reactivity are similar, featuring a break at the ethanol mole fraction, x(EtOH), of ca. 0.055; these effects have been related to changes in solvent structure, with formation of a clathrate at x(EtOH) = 0.055. Rate data in CTBABr were further investigated and fitting of raw kinetic data to the pseudophase model is possible up to x(EtOH) = 0.1, showing an unexpected decrease of rate constant values in the micellar pseudophase, kM', as ethanol content increases: a significant variation of micellar ionization degree could account for this kinetic effect.     

Nucleation of Pd dimers at defect sites of the MgO(100) surface

Point defects on oxide surfaces are presumed to be preferential nucleation sites for supported metal clusters. Under typical growth conditions, dimers constitute the first step in island nucleation. First-principles calculations on the formation of Pd dimers on regular and defect sites of the MgO(100) surface show that nucleation occurs with large dimer binding energies at divacancies and charged oxygen vacancies (F+ centers), while it is less favorable on steps and neutral F centers. The extensive database of defect trapping/attachment properties gives a firm basis to rationalize recent atomic-force microscopy findings and provides guidelines valid, in general, for ionic substrates.     

Paramagnetic defect centers at the MgO surface. An alternative model to oxygen vacancies

On the basis of embedded cluster calculations, we propose a new model for the structure of paramagnetic color centers at the MgO surface usually denoted as F(S)(H)(+) (an electron trapped near an adsorbed proton). These centers are produced by exposing the surface of polycrystalline MgO to H(2) followed by UV irradiation. We demonstrate that properties of H atom absorbed at surface sites such as step edges (MgO(step)) and reverse corner sites (MgO(RC)), formed at the intersection of two step edges, are compatible with a number of features observed for F(S)(H)(+). Our calculations suggest that (i) H(2) dissociates at the reverse corner site heterolytically and that there is no barrier for this exothermic reaction; (ii) the calculated vibrations of the resulting MgO(RC)(H(+))(H(-)) complex are fully consistent with the measured ones; (iii) desorption of a neutral H atom from the diamagnetic precursor requires UV light and leads to the formation of stable neutral paramagnetic centers at the surface, MgO(step)(H(+))(e(-))(trapped) and MgO(RC)(H(+))(e(-))(trapped). The computed isotropic hyperfine coupling constants and optical transitions of these centers are in broad agreement with the existing experimental data. We argue that these centers, which do not belong to the class of "oxygen vacancies", are two of the many possible forms of the F(S)(H)(+) defect center.     

Study of the reaction of bis- and tris-pyrylium and -thiopyrylium cations with methoxide ion. Electronic effects of the heterocyclic rings as substituents

The bis- and tris-pyrylium and thiopyrylium cations 1-4 were prepared in gram scale by heterocyclization of the corresponding bis- and tris-1,5-pentanediones 6 and 8. Their reaction with CD3ONa in CD3OD was studied by 1H NMR at -40 degrees C and at +25 degrees C. At low temperature, kinetically controlled mixtures of 2H and/or 4H adducts were detected, whereas at room temperature the mixtures equilibrated to yield, in all of the cases, the more stable 2H adducts exclusively. A spectrophotometric study of the reactions with sodium methoxide in methanol was carried out at 25.0 degrees C with the aim of determining the stepwise equilibrium constants for the addition of MeO- at the alpha position of the heteroaromatic rings. The obtained equilibrium constants allowed the evaluation of the electronic effects of chalcogenopyrylium and 2H-chalcogenopyran subunits as substituents. Despite the different sensitivity to electronic effects, pyrylium and thiopyrylium rings have a similar electron-withdrawing effect with a sigma(+)p approximately 0.8 and a sigma(+)m approximately 0.5. Apart from the expected importance of the inductive effect due to the positive charge, the difference between these two values remarks the importance of the resonance contribution. In contrast both the neutral 2H-pyranyl and thiopyranyl rings have a negligible effect as substituents, independently of the position, para or meta, they occupy.     

The crystal and molecular structure of the tetraethylammonium salt of tetrahydridopentadecacarbonyltetrarhenate(2−) in two crystallographic forms

The structure of the title compound, (NEt₄)₂[H₄Re₄(CO)₁₅], is reported in two crystallographic modifications, I and II. Both forms axe monoclinic and the cell constants are as follows: I, a 11.355(2), b 21.204(4), c 17.416(3) Å, β 94.15(2)°, space group P2₁/c; II, a 21.831(4), b 17.584(3), c 11.446(2) Å, β 96.02(2)°, space group P2₁,/n. Two sets of 3042 (I) and 2870 (II) independent diffraction intensities, collected by counter methods, were used for the solution and refinement of the two structures. The final conventional R factors have values 5.5% (I) and 6.3% (II), respectively. The crystal packings are compared, showing different conformations of the (NEt₄)⁺ cations. The anions contain a tetrametal cluster formed by an isosceles triangle plus an apically bound metal atom; the carbonyl groups are all terminally bonded to the rhenium atoms. Some differences, present both in the metal atom clusters and in the carbonyl dispositions, are discussed and compared with a third, previously reported, crystallographic modification of the same compound.     

Inductively coupled plasma mass spectrometric determination of molybdenum in urine

A method was developed for the determination of molybdenum (Mo) in human urine by direct dilution of the sample in doubly distilled water with 1% HNO3 (v/v) and inductively coupled mass spectrometry (ICP-MS). In and Y were used as internal standards. Since (98)Mo provides a higher sensitivity, it was chosen as the reference isotope. The influence of different factors, such as sample dilution, HNO3 concentration and the stability of the analyte were evaluated. The detection limit (LOD) was assessed at 0.2 microg/L Mo, while the lower limit of quantification (LOQ) was 0.6 microg/L. Recoveries ranged between 97.2 and 100.7% from solutions containing from 10 to 50 microg/L Mo. Linear calibration curves were generated from 2.1 and 52.1 microg/L with coefficients of variation (CV ) ranging from 1.62 to 3.56%. In order to establish reference values (RV) for molybdenum, the procedure presented here was used to determine Mo in the urine of a population group living in Tuscany, Italy.     

Unexpected high ordering of a [60]Fullerene nitroxide in the nematic phase of 4-4′-azoxyanisole

A nitroxide [60]fullerene adduct containing a pyrrolidine-1-oxyl group has been synthesized. Its orientational order in the nematic phase of the liquid crystal solvent 4,4′-azoxyanisole (PAA) has been measured from the variation of the EPR spectral parameters on passing from the isotropic to the nematic phase. Highly resolved EPR lines allow for precise evaluation of the shifts of the g, a _N and a _H values. Since the g and the hyperfine tensors are known, the order matrix could be obtained. This is compared with the one calculated with a theoretical model based on short range solute-solvent interactions, which predicts a considerable degree of orientation of the molecular axes, despite the almost spherical shape of the molecule. The agreement with experimental findings is quite good and it is further improved if a bent structure of the pyrrolidine ring is taken into account.     

Single electron traps at the surface of polycrystalline MgO: assignment of the main trapping sites

Paramagnetic centers at the surface of ionic oxides in the form of trapped electrons can be generated by exposure of the material to alkali metal or hydrogen atoms or of molecular hydrogen under UV irradiation. For many years, it has been assumed that the resulting paramagnetic centers consist of oxygen vacancies filled by one electron. High-resolution electron spin resonance spectra and ab initio quantum chemical calculations show that the paramagnetic centers consist of (H(+))(e(-)) electron pairs formed at morphological irregularities of the surface. At least three different kinds of (H(+))(e(-)) centers, [A], [B], and [C], have been identified with abundances of 80%, 10%, and 8%, respectively. In this work, we compare a wide set of measured and computed g-factors and hyperfine coupling constants of the unpaired electron with the surrounding (25)Mg, (17)O, and (1)H nuclei and we propose a general assignment of the centers. (H(+))(e(-)) pairs formed at Mg(4c) ions at steps and edges account for species [A], centers formed at Mg(4c) ions at reverse corners correspond to species [B], and species [C] originates from (H(+))(e(-)) pairs formed at Mg(3c) ions at corners and kinks.     

Partial least-squares modelling of dye fastness to light

Several physicochemical properties (¹³C-n.m.r., spectrophotometric, chromatographic, calorimetric) were measured for a series of 38 azo dyes in order to test the existence of relationships between one or more of these data sets and the fastness of the dyes on polyester fabric. The partial least-squares method was applied; it had previously proved useful in establishing structure/property relationships for the same dyes. It is shown that ¹³C-n.m.r. data can be used successfully to predict dye fastness to light. These data are quickly and cheaply obtained with small amounts of compound.