Electrokinetic properties of wavellite and its floatability with cationic and anionic collectors

The reverse apatite flotation with fatty acids has been widely used for the reduction of phosphorus content of magmatic origin iron ores. However, the occurrence of phosphorus intensely disseminated as secondary minerals such as wavellite renders the anionic reverse flotation a challenge. Zeta potential measurements and microflotation tests of wavellite with the use of anionic and cationic collectors were carried out in this work. The wavellite's IEP value was achieved at pH 4.5. Below the IEP value, the surface positively charged sites are made up of aluminum ions. The species H(+), Al(OH)(2)(+), Al(OH)(2+), Al(3+), OH(-), H(2)PO(4)(-), HPO(4)(2-), and PO(4)(3-) play a role in the protonation and deprotonation reactions that will determine the wavellite-solution interface properties. The highest values of wavellite's floatability under basic pH conditions were achieved in the presence of cationic collectors (1 × 10(-4) mol L(-1)). The formation of surface complexes and the precipitation of insoluble salt of aluminum onto wavellite surface seems to be the most likely hypothesis for the chemical nature interactions between amines and wavellite. The surface formation of aluminum oleate on the wavellite's surface seems to be the most probable hypothesis for the adsorption mechanism and the resultant high floatability of wavellite between pH 7.5 and pH 10.0 in the presence of sodium oleate (1 × 10(-4) mol L(-1)). The results showed that the cationic reverse flotation of secondary phosphates is a promising route to reduce the phosphorus content of iron ores from deposits that underwent a supergene enrichment process, since wavellite floatability in the alkaline pH range, using amine as collector, was not significantly affected by the presence of corn starch.     

Molybdenum site structure of Escherichia coli YedY, a novel bacterial oxidoreductase

We report a structural characterization using X-ray absorption spectroscopy of the molybdenum site of Escherichia coli YedY, a novel oxidoreductase related to be the sulfite oxidase family of molybdenum enzymes. We find that the enzyme can exist in Mo(V) and Mo(IV) oxidation states but cannot be readily oxidized to the Mo(VI) form. Mo(V) YedY has molybdenum coordination similar to that of sulfite oxidase, with one Mo═O at 1.71 ?, three Mo-S at 2.39 ?, and one Mo-OH at 2.09 ?, which elongates to 2.20 ? upon reduction to Mo(IV), indicating Mo-OH(2) coordination. The Mo(V) enzyme also possesses a long Mo-O coordination at 2.64 ?, which may be due to oxygen coordination by Asn-45 O(δ), with Mo-O(δ) approximately trans to the Mo═O group. A comparison with sulfite oxidase indicates that YedY possesses a much more uniform Mo-S coordination, with a maximum permitted deviation of less than 0.05 ?. Our results indicate that the YedY active site shows considerable similarity to but also important differences from that of reduced forms of sulfite oxidase.     

The 1(5)Π(g) state of C2

We report ab initio spectroscopic constants for the recently identified 1(5)Π(g) state of C(2) [P. Bornhauser, Y. Sych, G. Knopp, T. Gerber, and P. P. Radi, J. Chem. Phys. 134, 044302 (2011)]. The calculations are performed at the multi-reference configuration interaction level of theory with Davidson's correction using aug-cc-pV6Z basis sets and include core-valence correlation and relativistic corrections obtained with quadruple-zeta bases. Such treatment accurately reproduces the experimentally observed constants of the a(3)Π(u) and other states. Thus, we expect our calculated ω(e) value for the 1(5)Π(g) state to be within a few cm(-1), and rotational constants to be within 0.1% of experiment. Agreement with available spectroscopic data is excellent, with the calculations strongly suggesting that the 1(5)Π(g) vibrational level observed by Bornhauser et al. is v = 0.     

Perspective: The dawning of the age of graphene

Graphene is a single sheet of carbon atoms that constitutes the basic building block of macroscopic graphite crystals. Held together by a backbone of overlapping sp(2) hybrids, graphene's 2p orbitals form π state bands that delocalize over an entire 2-dimensional macroscopic carbon sheet leading to a number of unusual characteristics that include large electrical and thermal conductivities. Recent discoveries have provided simple methods (e.g., mechanical cleavage of graphite) for preparing laboratory scale samples that can be used to investigate the fundamental physical and chemical characteristics of graphene. In addition, a number of techniques have emerged that show promise for producing large-scale samples with the ultimate goal of developing devices that take advantage of graphene's unusual properties. As large samples become available, the possibility grows for applications of this material in solar cell technology (as flexible, transparent electrodes), in composite material development, and in electronic devices.     

A study of electron affinities using the initiator approach to full configuration interaction quantum Monte Carlo

For the atoms with Z ≤ 11, energies obtained using the "initiator" extension to full configuration interaction quantum Monte Carlo (i-FCIQMC) come to within statistical errors of the FCIQMC results. As these FCIQMC values have been shown to converge onto FCI results, the i-FCIQMC method allows similar accuracy to be achieved while significantly reducing the scaling with the size of the Slater determinant space. The i-FCIQMC electron affinities of the Z ≤ 11 atoms in the aug-cc-pVXZ basis sets are presented here. In every case, values are obtained to well within chemical accuracy [the mean absolute deviation (MAD) from the relativistically corrected experimental values is 0.41 mE(h)], and significantly improve on coupled cluster with singles, doubles and perturbative triples [CCSD(T)] results. Since the only remaining source of error is basis set incompleteness, we have investigated using CCSD(T)-F12 contributions to correct the i-FCIQMC results. By doing so, much faster convergence with respect to basis set size may be achieved for both the electron affinities and the FCIQMC ionization potentials presented in a previous paper. With this F12 correction, the MAD can be further reduced to 0.13 mE(h) for the electron affinities and 0.31 mE(h) for the ionization potentials.     

Complete family of mono-, bi-, and trinuclear Re(I)(CO)3Cl complexes of the bridging polypyridyl ligand 2,3,8,9,14,15-hexamethyl-5,6,11,12,17,18-hexaazatrinapthalene: syn/anti isomer separation, characterization, and photophysics

The syn and anti isomers of the bi- and trinuclear Re(CO)(3)Cl complexes of 2,3,8,9,14,15-hexamethyl-5,6,11,12,17,18-hexaazatrinapthalene (HATN-Me(6)) are reported. The isomers are characterized by (1)H NMR spectroscopy and X-ray crystallography. The formation of the binuclear complex from the reaction of HATN-Me(6) with 2 equiv of Re(CO)(5)Cl in chloroform results in a 1:1 ratio of the syn and anti isomers. However, synthesis of the trinuclear complex from the reaction of HATN-Me(6) with 3 equiv of Re(CO)(5)Cl in chloroform produces only the anti isomer. syn-{(Re(CO)(3)Cl)(3)(μ-HATN-Me(6))} can be synthesized by reacting 1 equiv of Re(CO)(5)Cl with syn-{(Re(CO)(3)Cl)(2)(μ-HATN-Me(6))} in refluxing toluene. The product is isolated by subsequent chromatography. The X-ray crystal structures of syn-{(Re(CO)(3)Cl)(2)(μ-HATN-Me(6))} and anti-{(Re(CO)(3)Cl)(3)(μ-HATN-Me(6))} are presented both showing severe distortions of the HATN ligand unit and intermolecular π stacking. The complexes show intense absorptions in the visible region, comprising strong π → π* and metal-to-ligand charge-transfer (MLCT) transitions, which are modeled using time-dependent density functional theory (TD-DFT). The energy of the MLCT absorption decreases from mono- to bi- to trinuclear complexes. The first reduction potentials of the complexes become more positive upon binding of subsequent Re(CO)(3)Cl fragments, consistent with changes in the energy of the MLCT bands and lowering of the energy of relevant lowest unoccupied molecular orbitals, and this is supported by TD-DFT. The nature of the excited states of all of the complexes is also studied using both resonance Raman and picosecond time-resolved IR spectroscopy, where it is shown that MLCT excitation results in the oxidation of one rhenium center. The patterns of the shifts in the carbonyl bands upon excitation reveal that the MLCT state is localized on one rhenium center on the IR time scale.     

Luminescent ruthenium tripod complexes: properties in solution and on conductive surfaces

Two luminescent ruthenium complexes containing tripod-type end groups linked through a rigid spacer to a phenanthroline derivative, able to confer an axial geometry to the complexes, are described. One of the compounds is functionalized with thioacetate groups in order to link the metal complex to metallic surfaces. The photophysical and electrochemical behavior of the complexes are studied in solution and on conductive substrates and, furthermore, self-assembled monolayers are investigated in a junction using gold and an indium gallium eutectic, as electrodes, and by time-resolved confocal microscopy. The results show that the complexes form very stable and well-ordered monolayers because of the tripod system, which can anchor the complex almost perpendicular to the surfaces.     

One-pot synthesis of functionalized spirobenzofuranones via MCR involving 3-cyanochromones

Another aspect concerning chromone chemistry leading to the one-pot synthesis of functionalized novel spirobenzofuranones has been described. The synthesis involves reaction of the zwitterionic intermediates formed by the 1:1 interaction between isocyanides and acetylenecarboxylates with 3-cyanochromones, whereupon through an unexpected and unprecedented reaction of the chromone moiety the isolated benzofuranones are formed. The regioselectivity of the reaction was investigated by DFT calculations. The geometries of the intermediates, transition structures, and intermediate products, leading to the final products, were optimized using the B3LYP functional with the 6-31G(d) basis set. The structures of the products were elucidated by 1D and 2D NMR experiments. Full assignment of all (1)H and (13)C NMR chemical shifts has been achieved. A plausible mechanistic rationale is proposed.     

Regioselective cobalt-catalyzed addition of sulfides to unactivated alkenes

A novel method to synthesize tertiary alkyl/aryl sulfides in a mild and regioselective manner from unactivated alkenes using cobalt catalysis is described. The methodology is compatible with sensitive functionalities and is successful with several different types of alkenes and sulfides.     

Pulsed jet discharge matrix isolation and computational study of bromine atom complexes: Br···BrXCH(2) (X = H, Cl, Br)

Halogen atoms are important reactive radicals in the atmosphere. In this work, pulsed jet discharge matrix isolation spectroscopy and computational methods were used to characterize prereactive complexes of halogen atoms with simple halons. Our experiments combined matrix isolation techniques with a pulsed DC discharge nozzle, where a dilute CH(2)XBr (X = H, Cl, Br)/rare gas sample was gently discharged and the products were deposited onto a cold KBr window. The Br···BrCH(2)X (X = H, Cl, Br) complexes were characterized by infrared and electronic spectroscopy, supported by ab initio and density functional theory (DFT) calculations, which shed light on the structure of, bonding in, and binding energy of the complexes. The correlation of charge-transfer energy with donor ionization potential (Mulliken correlation) was examined, and the charge-transfer photochemistry of the complexes was explored.