Total internal reflection–refraction beam expander

Beam expanders being used presently have complex structure and none is perfect. A novel beam expander is proposed first. The beam expander can magnify (or decrease) the diameter of incident laser beam according to the theory of total internal reflection–refraction (TIR-R) principle. The characteristic of the beam expander was studied by using ray-tracing method and computer simulation. The beam expander can propagate a parallel laser beam along the propagation axis and would not change the propagation direction of the beam. For a nonparallel beam the Lagrange invariant (the product of diameter and divergence angle) is not constant. This beam expander would be an effective device in some applications.     

KBA显微镜成像系统的成像模拟及X光成像实验的研究

KBA显微镜是一种非轴对称、非共轴的掠入射成像系统。其结构复杂,调节精度要求很高,在实际成像实验操作中难以掌握其成像特性。利用光学设计软件模拟其成像,对系统的调节和成像分析提供有益的参考。利用光学设计软件ZEMAX模拟了KBA显微镜对点源的成像过程,给出了KBA显微镜成像系统的焦深约为1 mm,景深为50 mm左右。并且由模拟可知,掠入射角对成像的影响很大。对像素尺寸约10μm的探测设备,模拟得出KBA成像系统的空间分辨力上限为3μm左右。基于星光Ⅱ装置对周期为20μm的网格靶成像,获得了KBA显微镜较为清晰的X光图像。该项工作为进一步开展掠入射成像系统的研究奠定了基础。     

Laser-induced damage of Ta2O5/SiO2 narrow-band interference filters under different 1064 nm Nd:YAG laser modes

The laser-induced damage (LID) behavior of narrow-band interference filters was investigated with a Nd:YAG laser at 1064 nm under single-pulse mode and free-running mode. The absorption measurement of such coatings was performed with surface thermal lensing (STL) technique. The damage morphologies under the two different laser modes were also studied in detail. It was found that all the filters exhibited a pass-band-center-dependent absorption and laser-induced damage threshold (LIDT) behavior, but the damage morphologies were diverse. The explanation was given with the analysis of the electric field distribution and the operational behavior of the irradiation laser.     

Young-type interference in (e, 2e) ionization of H(2)

We have investigated the electron impact single ionization of the hydrogen molecule, with fully determined kinematics. The experimental and theoretical results are compared with He ionization under the same conditions. The results indicate that the ejected electron angular distribution for H(2) is modified due to Young-type interference between ionization amplitudes for scattering from the two centers in the hydrogen molecule. The observable result is a suppression of the backward scattering (recoil) peak compared with the binary peak.     

类Liu系统在水声微弱信号检测中的应用研究

利用三阶混沌系统构造了一种新的微弱信号检测系统——类Liu系统, 对类Liu 系统进行了深度的理论分析. 类Liu系统中, 当输入待测信号幅值大于某临界值时, 系统可达到平衡点S₀, S₀中系统变量x平衡于摄动力信号, 系统变量y, z收敛于零态, 且S₀ 对应的Lyapunov指数小于零. 通过Matlab仿真、Multisim电路仿真以及实际电路证明了类Liu系统的周期态收敛性及广域检测性, 解决了传统Duffing系统进行微弱信号检测时周期态不收敛、只能进行窄域检测等问题, 同时谱级信噪比范围仍可达-46.57 dB. 类Liu系统采用了全新的设计理念, 具有较高的实用价值, 对未来海洋物联网中的水声通信有一定参考价值.     

钾掺杂对三联苯的超导特性探寻

新型超导材料的设计合成及其超导机理的探索是目前凝聚态物理学领域的重要研究方向. 本文采用高真空热烧结方法制备了钾掺杂对三联苯粉末材料并表征了它们的晶体结构、分子振动、磁学及超导特性. X射线衍射图谱和拉曼光谱表明在烧结样品中除存在钾掺杂对三联苯和KH外, 还含有苯环重组的C₆₀和石墨成分. 拉曼光谱中部分峰位的红移进一步证实钾成功掺入对三联苯分子晶体中并将4 s电子转移到C原子上. 零场冷却磁性测量结果表明: 多数样品在整个温度测量区间表现为居里顺磁性, 但少数样品呈现出抗磁性, 而且在17.86, 10.00 和6.42 K三个温度点出现磁化率突降的反常行为, 其中17.86 K处的突降很可能源于钾掺杂C₆₀引起的超导转变, 而后两者可能与钾掺杂对三联苯导致的超导相关. 研究结果有助于理解金属掺杂芳香烃有机超导体这一新兴超导家族的晶体生长和物理特性, 同时也提供了一种低温制备C₆₀和石墨的新方法.     

Structures,Oxidation, and Charge Transport of Phosphorus‐Doped Germanium Nanocrystals

The doping of semiconductor nanocrystals (NCs) is crucial for the optimization of the performance of devices based on them. In contrast to recent progress on the doping of compound semiconductor NCs and silicon NCs, the doping of germanium (Ge) NCs has lagged behind. Here it is shown that Ge NCs can be doped with phosphorus (P) during synthesis by a nonthermal plasma. It is found that there are more P atoms in the NC near‐surface region than in the NC core. P doping modifies the surface state of Ge NCs. Compressive strain can be incuced in Ge NCs by P which can explain the P‐doping‐enhanced oxidation resistance of Ge NCs. Stable dispersions of P‐doped Ge NCs in acetonitrile can be cast to produce films for field‐effect transistors (FETs). FET analysis shows that the electrical conductivity and electron mobility of a Ge‐NC film increase with the increase of the P doping level, although the electrical activation efficiency of P in the Ge‐NC film is low. Finally, atomic layer deposition of aluminum oxide at the surface of P‐doped Ge NCs is shown to improve the performance of the FETs.     

Multiparty-controlled quantum secure direct communication

A theoretical scheme of a multiparty-controlled quantum secure direct communication is proposed. The supervisor prepares a communication network with Einstein-Podolsky-Rosen pairs and auxiliary particles. After passing a security test of the communication network, a supervisor tells the users the network is secure and they can communicate. If the controllers allow the communicators to communicate, the controllers should perform measurements and inform the communicators of the outcomes. The communicators then begin to communicate after they perform a security test of the quantum channel and verify that it is secure. The recipient can decrypt the secret message in a classical message from the sender depending on the protocol. Any two users in the network can communicate through the above processes under the control of the supervisor and the controllers. The text was submitted by the authors in English.     

Observation of spontaneous pattern with six-fold symmetry in disk-shaped ZnO complex microstructures

Using a simple vapor phase transport technique, we have fabricated unique complex disk-shaped ZnO microstructures comprising a small disk coaxially grown on a large one and observed spatially perfect six-fold symmetric patterns. The observed results can be explained based on the spontaneous nanoindentation (NI) effect under the geometric constraints and the explanation can be extended to fathom the growth mechanism of other highly symmetrical ZnO nanostructures. Our results indicate that NI not only can elucidate the mechanical properties of surfaces and thin films but also is an effective approach to fabricate ordered nanostructures with high precision on the location of the building blocks. PACS 81.16.Rf; 81.07.-b; 81.05.Dz     

大功率高温超导滤波器的设计与功率测试

本文在双面YBCO高温超导薄膜上设计并制备了两节大功率超导滤波器,根据滤波器功率承载能力与最大电流密度之间的关系,减小电流密度和分散电流密度的分布是提高功率承载能力的关键.本文采用增加超导谐振器尺寸、优化几何结构及改进馈线耦合方式的方法,设计了两节2 GHz频段梭型谐振器结构的滤波器.设计及测量结果显示了馈线结构及谐振器几何尺寸优化程度对超导滤波器功率承载能力有不同程度的影响,说明了在大功率超导滤波器设计中应选用无结点间隙耦合式馈线以抑制电流密度的聚集.采用优化后的谐振器结构制备的梭型两节超导滤波器经测试功率承载能力为2 W.超导滤波器的尺寸为25×12 mm LaAlO3基片,中心频率2.022 GHz,相对带宽为2.4%.同时给出了超导滤波器功率测试的结构和方法.