选相原位法合成立方氮化硼的关键影响因素

利用选相原位法在水溶液中成功制备出了立方氮化硼晶体，对反应条件进行了优化。结果表明，利用选相原位法合成立方氮化硼的最佳实验条件是：反应压力为10.0 MPa，在氯离子加入下利用混合氮源进行反应。在该条件下得到了纯相的立方氮化硼晶体。     

反相离子对高效液相色谱法测定母粉及母液中的杀鼠新

用反相离子对高效液相色谱法测定了杀鼠新母粉及母液中有效成份含量。采用Partisil-10ODS色谱柱，以甲醇：离子对溶液＝80：20（体积比）为流动相，离子对溶液为0.005mol/L四丁基铵磷酸盐（pH为7.5)的缓冲溶液，测定波长285nm。方法在0.025-0.15g/L范围内有很好的线性关系。杀鼠新母粉和母液的相对标准偏差分别为1.24%、0.77%(n=7)，回收率分别为：母粉,97.7%-99.8%；母液，98.5%-100.4%。     

掺杂镨的纳米二氧化钛光催化降解2,4-二硝基苯酚的研究

以钛酸丁酯为原料,用溶胶-凝胶(sol-gel)法制备了掺杂镨的纳米TiO2粉末.采用X光衍射仪对粉体的物相进行了表征.样品经500 ℃焙烧2 h后,0.5%(摩尔分数)Pr3+-TiO2纳米粉末为单一的锐钛型结构.通过粉体对2,4-二硝基苯酚的降解情况对其光催化活性进行了测试,结果表明与纯TiO2相比,Pr3+-TiO2的光催化活性有较大提高,当Pr3+的掺入量为0.5%(摩尔分数)时催化活性最高.以高压汞灯为光源,2,4-二硝基苯酚的初始浓度为50 mg·L-1,催化剂0.5%(摩尔分数)Pr3+-TiO2投加量为1.0 g·L-1时,2,4-二硝基苯酚的光催化降解效果最好.     

三元配合物钯（Ⅱ）-2,2''-联吡啶-L-天冬氨酸与DNA作用研究

The ternary complex Pd(Ⅱ)-2,2‘-bipyridine-L-asparagic acid was synthesized and characterized by elemental analysis, IR-spectra and molar conductance. The formula of the complex is Pd(bipy)(L-asp). The interaction of the complex with DNA has been studied by UV-spectra, fluorescence spectra, CD-spectra and gel electrophoresis. The results showed that the interaction of the complex with DNA performed mainly in intercalative mode and the extent of interaction was dependent on the concentration of the complex.     

Polymer bound glutamic acid salicylaldehyde Schiff‐base complex ­catalyst for oxidation of olefins with ­dioxygen

The polymer bound Schiff‐base ligand (PS‐SalGlu) has been prepared from polystyrene bound salicylaldehyde and glutamic acid, and its complex (PS‐SalGlu‐Co) has also been synthesized. The polymer ligand and its complex were characterized by infrared spectroscopy, small area X‐ray photoelectron spectroscopy, and inductively coupled plasma‐atomic emission spectro (ICP‐AFS). In the presence of the complex, cyclohexene can be effectively oxidized by molecular oxygen without reductant. The long‐chain linear aliphatic olefins, such as 1‐octene, 1‐decene, 1‐dodecene and 1‐tetradecene, can be directly oxidized by molecular oxygen catalyzed by PS‐SalGlu‐Co, which affords the 1,2‐epoxy alkane. Copyright © 2001 John Wiley & Sons, Ltd.     

A novel approach to carbon hollow spheres and vessels from CCl4 at low temperatures

Carbon hollow spheres (400-600 nm) and vessels (400 nm x 3000 nm) have been synthesized from sp3-CCl4 at 190 and 230 degrees C, respectively. The HRTEM images and Raman spectra reveal the sp2 nature of the as-obtained products, indicating that the transformation from carbon sp3 to sp2 occurs in the reactions. The possible mechanism has also been proposed.     

Efficient and mild benzoin condensation reaction catalyzed by simple 1-N-alkyl-3-methylimidazolium salts

The benzoin reaction, catalyzed by simple 1-N-alkyl-3-methylimidazolium salt-based ionic liquid via carbene intermediate, to give the α-hydroxyl ketone proceeds in CH₂Cl₂ under mild conditions.     

Preparation of porous polylactide microspheres by emulsion‐solvent evaporation based on solution induced phase separation

Porous polylactide (PLA) microspheres were fabricated by an emulsion‐solvent evaporation method based on solution induced phase separation. Scanning electron microscopy (SEM) observations confirmed the porous structure of the microspheres with good connectivity. The pore size was in the range of decade micrometers. Besides large cavities as similarly existed on non‐porous microspheres, small pores were found on surfaces of the porous microspheres. The apparent density of the porous microspheres was much smaller than that of non‐porous microspheres. Fabrication conditions such as stirring rate, good solvent/non‐solvent ratio, PLA concentration and dispersant (polyvinyl alcohol, PVA) concentration had an important influence on both the particle size and size distribution and the pore size within the microspheres. A larger pore size was achieved at a slower stirring rate, lower good solvent/non‐solvent ratio or lower PLA concentration due to longer coalescence time. Copyright © 2005 John Wiley & Sons, Ltd.     

土壤环境中铅的化学

论述了环境中铅的背景值、来源、污染、质量标准、化学循环以及环境中铅的烷基化，为铅污染治理提供理论依据。     

The Synthesis and Structure of Silica-Sodalite from Nonaqueous Systems

A silica polymorph, silica-sodalite was synthesized from a nonaqueous system NaOH-SiO2-C2H4(OH)2 and its chemical compositionwas determined to be Si12 O24,2C2H4(OH)2 by the X-fluorescence,thermogravimetric and organic elemental analyses. The single crystal X-ray diffraction structure determination of the silica-sodaliteshowed that the silica-sodalite is cubic, spacing group I23 and unitcell parameter a= 8.8354A. The IF and solid state high resolution Siand 13 C NMR spectra of the silica-sodalite were measured and discussed .