4-Amino-l,2,4-triazole Resin-supported Palladium Complex as Phosphine-free Catalyst for Suzuki Reaction in Aqueous Phase

1 Introduction The Suzuki cross-coupling reaction is a powerful and versatile method for the generation of unsymme-trical biaryls from arylboronic acids and aryl halides in a single step~([1-3]).However,the reaction is usually performed in the presence of Pd catalyst along with phosphine ligand,which sometimes creates practical problems because organophosphines tend to be expensive,poisonous,and air sensitive.Recently,phosphine-free ligands,such as nitrogen or sulfur-containing ligands~([4-6]) and N-heterocyclic car-benes~([7-12]) have been applied in Suzuki reaction effectively.     

Evolution of Gold Species in an Au/CeO2 Catalyst and Its Impact on Activity for CO Oxidation

An Au/ceria(0.44%, mass fraction) catalyst containing gold ions was prepared by a modified deposition precipitation method, and the evolution of gold ions in the catalyst and its influence on the catalysis of CO oxidation were investigated. It was found that the as-prepared catalyst containing gold ions with high valence could fully oxidize CO at –10 °C initially but was deactivated gradually at low temperatures during the reaction with CO or treatment by unpurified air. The deactivation of the catalyst during CO oxidation or treatment of it by unpurified air was independent and progressive at low temperatures while the activity of the catalyst at relatively high temperatures was maintained well. During the reaction with CO or treatment by unpurified air, the XPS results indicate that gold species evolved from high valence to low valence and the diffuse reflectance UV-Vis spectra show that high valence gold was reduced to charged gold clusters, gold clusters grew to small gold crystals and small gold crystals grew to large gold particles. Accordingly, the high valence gold corresponded to the activity at low temperatures and the metallic gold was active and relatively stable at high temperatures. The turnover frequencies(TOF) of the catalysts treated by different methods at 273 K decreased with the evolution of gold species from high valence to low valence, no maximum of TOF was observed although gold particles in the catalyst attained to about 2―3 nm during the treatment. An Au/ceria catalyst with a gold load of 0.87% (mass fraction) maintained a good activity for CO oxidation within 18 h at room temperature. The catalysts were characterized via transmitted electronic microscopy(TEM), inductively coupled plasma optical emission spectrometry(ICP-OES), X-ray diffraction(XRD) and BET specific surface area and UV-Vis DRS as well.     

应用手持式XRF分析仪快速测定白铜中的Cu、Ni、Co含量

采用国产手持式XRF分析仪快速分析了白铜合金主元素的含量,探讨了白铜合金基体效应对测量结果的影响,采用经验系数法中多元回归分析建立数学模型,较好地校正基体效应,分析白铜合金中铜、镍、钴的平均相对误差分别为0.39%、1.83%、1.59%。     

溶剂萃取法提锂的研究进展

总结了采用溶剂萃取法在盐湖卤水中提取锂资源的三类萃取剂:酸性萃取剂、中性络合萃取剂和碱性萃取剂,分析了三类不同萃取剂在萃取锂工艺过程的优缺点,指出了溶剂萃取法从高镁锂比的盐湖卤水中萃取提锂尚待攻克的技术难题。     

三元钴配合物[Co(NCS)_2(ql)_2](ql=喹啉)的合成及其晶体结构和荧光性质

合成了含异硫氰酸根和喹啉(ql)混合配体的钴配合物[Co(NCS)2(ql)2];利用红外光谱、紫外光谱和X射线单晶衍射等手段对其结构进行了表征;研究了配合物在室温下的荧光发射光谱特性.单晶结构解析结果表明,标题化合物属于单斜晶系,P21/c空间群,晶胞参数为:a=1.486 33(5)nm,b=0.844 44(3)nm,c=1.541 16(5)nm,β=92.093(2),V=1.933 0(2)nm3,Z=4,Dc=1.489 g/cm3,μ=1.116 mm-1,F(000)=884,R1=0.032 2,wR2=0.078 6.配合物中钴离子采用四配位的四面体配位构型,晶体堆积中通过π-π作用形成一维超分子结构.     

Different self-assembly behaviors of mono-modified β-cyclodextrin substituted by benzoic acid derivatives

The mono-modified β-cyclodextrin derivative,6-O-(4-aminobenzoyl)-β-cyclodextrin(1) ,was synthesized and characterized. We compared its self-assembling behavior with structurally related β-cyclodextrin derivative,6-O-(4-hydroxybenzoyl)-βcyclodextrin(2) ,in aqueous solution and in the solid state using NMR spectroscopy and single crystal X-ray structure analysis. The two complexes displayed different self-assembling behaviors.Complex 1 formed a head-to-tail helical columnar superstructure in which the substit...     

电泳技术在纳米颗粒分离中的应用

合成纳米颗粒常在尺寸和形状方面具有广泛分布.在很多实验中,需要利用一定大小及形状的纳米颗粒的独特物理化学性质,因此,简便快速的纳米颗粒分离技术越来越受到诸多科学领域的重视.电泳技术以其高分辨率,被广泛用于多种生物大分子如核酸、蛋白质等的分离纯化.纳米颗粒在尺寸上与生物体中的蛋白复合物、细胞器和微生物等十分接近,考虑到带电纳米颗粒与生物分子在电场中的运动行为的相似性,运用电泳技术进行纳米颗粒的鉴定、分离和纯化是一种新的思路,并取得了良好的实验结果.本文主要介绍了琼脂糖凝胶电泳、毛细管电泳以及其他一些电泳技术在纳米颗粒分离中的研究进展.     

五轴加工中心范成铣磨离轴非球面研究

离轴非球面作为非球面的一部分,是空间光学系统、天文学和高精度测量系统不可或缺的光学器件.针对空间光学对离轴非球面光学元件制造技术的重大需求,开展了离轴非球面反射镜的精密铣磨加工技术研究.分析了五轴联动范成法铣磨离轴非球面的原理,将离轴非球面所在的同轴母镜离散为一系列不同半径的球面环带,将工件坐标系建立在待加工离轴非球面...     

抽提物对生物质热裂解机理的影响研究

利用惰性溶剂从生物质中提取得到相应抽提物,在热重红外联用仪上研究了抽提物的热裂解行为,并探讨了其对生物质热裂解的影响。结果表明,因不同种类生物质中木质素结构单元中紫丁香基和愈创木基数量不同,从而导致抽提物成分存在差异,相应的热裂解产物分布也不一致。水曲柳抽提物因含有较多的酚类物质而在热解高温段生成了甲醇和甲烷。相比于原样,抽提残渣反应活化能增加,且主要产物析出时间提前,同时酸类物质和直链烷烃析出量减少,而水、CO2、CO和醛类物质的产量则有所增加。     

MgO/Al_2O_3吸附剂对CO_2动态吸附性能的研究

以γ-Al2O3为载体,采用等体积浸渍法制取MgO/Al2O3吸附剂,利用BET、XRD等表征手段对吸附剂进行表征;并通过固定床测量穿透曲线的方法研究其对CO2动态吸附性能的影响,考察了MgO负载量、吸附温度、气体流量等因素对吸附剂吸附CO2性能的影响,同时还通过多次吸脱附实验考察MgO/Al2O3吸附剂的稳定性和再生能力。结果表明,MgO负载量为10%的吸附剂,吸附温度在50℃左右,流量为45 mL/min动态吸附量最大;经数次循环后材料的结构性质和吸附性能未见明显变化,可再生性能比较优异,是一种潜在的可工业化应用的CO2吸附剂。