北京谱仪Ⅲ电磁量能器触发系统的模拟研究

利用北京谱仪Ⅲ探测器模拟和触发系统模拟程序,研究了北京谱仪Ⅲ电磁量能器的触发方案.根据物理目标设计了中性事例触发,巴巴事例判选和带电事例触发的方案,优化了各触发条件的参数,并仔细研究了对本底的排斥能力.研究了一批典型的物理道,给出了它们的触发效率,同时给出了预期的本底触发事例率.     

Theoretical Study on the Reaction Mechanism between Dichlorocarbene and Armchair Single-walled Carbon Nanotubes

1 INTRODUCTION Carbon nanotubes have many potential applica- tions due to their unique structures and properties[1～4]. Physicists have been studying their electrical, me- chanical and other properties since their discove- ries[5, 6]. Recently, chemists are interested in carbon nanotubes because their properties can be altered by chemical functionalization[7～14], and these functiona- lized nanotubes can undergo further chemical trea- tment. So the potential application range of such na- …     

基于自适应预测滤波理论的模数转换器设计方法

基于自适应差分量化理论，提出了在不增加转换位数的情况下提高模数转换器(ADC)动态范围的一种设计方法。该方法通过量化输入与预测的差值来获得预测增益，从而扩大ADC的动态范围；通过差分量化值与预测值相加得到输出信号，并将该分别采用LMS和RLS算法进行处理．得到输入信号的预测值．计算机模拟结果证实，上述两种算法均能使模数转换器的动态范围提高约25dB．比较而言，RLS算法收敛速度更快，收敛性更好，但计算量较大．     

Efficient microwave induced direct α-halogenation of carbonyl compounds

A novel and direct method for the synthesis of α-halocarbonyl compounds using sequential treatment of carbonyl compounds with [hydroxy(tosyloxy)iodo]benzene followed by magnesium halides under solvent-free microwave irradiation conditions is described.     

激光等离子体探针及应用研究

本文介绍用阴影、纹影相干涉方法确定等离子体折射系数变化的原理。分析了等离子体中的非线性效应和对光探测系统的基本要求。并简要叙述了实验上采用的后向喇曼探测束,给出了等离子体干涉、纹影和阴影的测量结果。     

流体静高压下的锂离子导电性

本文改进实验方法,在0.0001—1.23GPa流体静高压下测量了整片非晶锂离子导体B₂O₃-0.7Li₂O-0.7LiCl-xAl₂O₃(x=0.05;0.15)及其粉末压片的离子电导率及激活体积。发现粉末压片电导率峰值是由非晶微粒间的接触电导及非晶微粒体电导两者叠加;对整片非晶电导率的压力效应用离子迁移通道的物理图象给出初步的微观解释。此外,还观测到氧化铝组分减少使电导率的压力转变点明显降低;测量出不同温度热处理以及300℃等温热处理4—20h后离子电导率-压力曲线的变化规律,仍可归因于非晶态相分离及两种非晶相的先后晶化。 关键词：     

Orlicz-Sobolev空间的中点局部一致凸性

本文研究了Orlicz-Sobolev空间的中点局部一致凸性，通过结合Orlicz空间和Sobolev空间的技巧得到分别赋Luxemburg范数和赋Orlicz范数的Orlicz-Sobolev空间具有中点局部一致凸性的充要条件．     

BOUNDEDNESS OF MAXIMAL SINGULAR INTEGRALS

The authors study the singular integrals under the Hormander condition and the measure not satisfying the doubling condition. At first, if the corresponding singular integral is bounded from L2 to itself, it is proved that the maximal singular integral is bounded from L∞to RBMO except that it is infinite μ-a.e. on Rd. A sufficient condition and a necessary condition such that the maximal singular integral is bounded from L2 to itself are also obtained. There is a small gap between the two conditions.     

The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.