A novel approach to the acoustic characterisation of porous road surfaces

Porous road surfaces offer an effective means of reducing the generation and propagation of noise from road traffic. However, the porosity of these surfaces can deteriorate over time, leading to a reduction in their noise reducing properties. Efficient methods are therefore required for monitoring this performance. Existing techniques for performing in-situ measurements of acoustic absorption are unsuitable for use within the traffic stream. Static measurements using time domain Maximum Length Sequence (MLS) based techniques have been demonstrated to offer advantages over traditional techniques, presenting the opportunity for measurements under dynamic conditions. This paper describes the design of a system for carrying out dynamic MLS-based measurements. Results are presented which demonstrate that stable dynamic measurements can be carried out at speeds of up to 30 km/h.     

Unsteady motion in single-line flow-injection systems

Unsteady motion in single-line flow-injection systems consisting of n tubular elements with valve or hydrodynamic injection is studied theoretically. A formula for the duration of the initial period of unsteady flow is derived. This initial period is much shorter than the mean residence time of the analyte in practical systems. It can therefore be neglected in mathematical modelling of such systems. Experimental data obtained with single-line systems with valve and hydrodynamic injection confirmed the validity of the theoretical equations.     

Untersuchungen zur Wechselwirkung von gasf?rmigem molekularem Iod mit Silberoberfl?chen mittels XPS und AES

Summary The adsorption of gaseous molecular iodine on clean silver surfaces proceeds in the first stage by dissociative chemisorption. After the formation of half a monolayer of chemisorbed iodine atoms the formation of silver iodide begins, which forms a very regular overlayer on top of the substrate. Both iodine species can be distinguished due to a difference in chemical shift of the M₄N₄, ₅N₄, ₅-Auger transitions. After completion of this overlayer further iodine uptake is slowed down significantly. Above an overlayer thickness of about 10 nm a further progress of the reaction cannot be followed anymore due to the limited information depth of XPS.     

Reciprocating sliding wear behavior of laser-clad small amplitude Mo2Ni3Si/NiSi metal silicide composite coatings

Mo₂Ni₃Si/NiSi metal silicide composite coatings with a fine microstructure consisting of Mo₂Ni₃Si primary dendrites and the interdendritic Mo₂Ni₃Si/NiSi eutectics were fabricated on austenitic stainless steel AISI 321 by laser cladding process. Small amplitude reciprocating sliding wear resistance of the coatings is evaluated as functions of normal load and slip amplitude and the wear mechanisms were discussed based on worn surface morphology observations. Results showed that the Mo₂Ni₃Si/NiSi coatings have excellent small amplitude reciprocating sliding wear resistance.     

Activity of microemulsion-based nanoparticles at the human bio-nano interface: concentration-dependent effects on thrombosis and hemolysis in whole blood

Background: Although microemulsion-based nanoparticles (MEs) may be useful for drug delivery or scavenging, these benefits must be balanced against potential nanotoxicological effects in biological tissue (bio-nano interface). We investigated the actions of assembled MEs and their individual components at the bio-nano interface of thrombosis and hemolysis in human blood. Methods: Oil-in-water MEs were synthesized using ethylbutyrate, sodium caprylate, and pluronic F-68 (ME4) or F-127 (ME6) in 0.9% NaCl_w/v. The effects of MEs or components on thrombosis were determined using thrombo-elastography, platelet contractile force, clot elastic modulus, and platelet counting. For hemolysis, ME or components were incubated with erythrocytes, centrifuged, and washed for measurement of free hemoglobin by spectroscopy. Results and conclusions: The mean particle diameters (polydispersity index) for ME6 and ME4 were 23.6 ± 2.5 nm (0.362) and 14.0 ± 1.0 nm (0.008), respectively. MEs (0, 0.03, 0.3, 3 mM) markedly reduced the thromboelastograph maximal amplitude in a concentration-dependent manner (49.0 ± 4.2, 39.0 ± 5.6, 15.0 ± 8.7, 3.8 ± 1.3 mm, respectively), an effect highly correlated (r2 = 0.94) with similar changes caused by pluronic surfactants (48.7 ± 10.9, 30.7 ± 15.8, 20.0 ± 11.3, 2.0 ± 0.5) alone. Neither oil nor sodium caprylate alone affected the thromboelastograph. The clot contractile force was reduced by ME (27.3 ± 11.1–6.7 ± 3.4 kdynes/cm², P = 0.02, n = 5) whereas the platelet population not affected (175 ± 28–182 ± 23 10⁶/ml, P = 0.12, n = 6). This data suggests that MEs reduced platelet activity due to associated pluronic surfactants, but caused minimal changes in protein function necessary for coagulation. Although pharmacological concentrations of sodium caprylate caused hemolysis (EC₅₀ = 213 mM), MEs and pluronic surfactants did not disrupt erythrocytes. Knowledge of nanoparticle activity and potential associated nanotoxicity at this bio-nano interface enables rational ME design for in vivo applications.     

Thermal diffusion of envelope solitons on anharmonic atomic chains

We study the motion of envelope solitons on anharmonic atomic chains in the presence of dissipation and thermal fluctuations. We consider the continuum limit of the discrete system and apply an adiabatic perturbation theory which yields a system of stochastic integro-differential equations for the collective variables of the ansatz for the perturbed envelope soliton. We derive the Fokker-Planck equation of this system and search for a statistically equivalent system of Langevin equations, which shares the same Fokker-Planck equation. We undertake an analytical analysis of the Langevin system and derive an expression for the variance of the soliton position Var[x _s ] which predicts a stronger than linear time dependence of Var[x _s ] (superdiffusion). We compare these results with simulations for the discrete system and find they agree well. We refer to recent studies where the diffusion of pulse solitons were found to exhibit a superdiffusive behaviour on longer time scales.Received: 28 June 2004, Published online: 26 November 2004PACS: 05.10.Gg Stochastic analysis methods - 05.45.Yv Solitons - 05.40.-a Fluctuation phenomena, random processes, noise, and Brownian motion - 05.50. + q Lattice theory and statistics     

A representation of the Belavkin equation via Feynman path integrals

 The Belavkin equation, describing the continuous measurement of the position of a quantum particle, is studied. A rigorous representation of its solution by means of an infinite dimensional oscillatory integral (Feynman path integral) defined on the complex Cameron-Martin space is given. Received: 7 January 2002 / Revised version: 20 June 2002 / Published online: 19 December 2002 Mathematics Subject Classification (2000): 81, 81S40, 60H15 Key words or phrases: Belavkin equation – Continuous measurement – Quantum theory – Oscillatory integrals – Feynman path integrals     

Structure and properties of the mesophase of syndiotactic polystyrene. II. Effect of stepwise extraction on the preparation of the mesophase

In this study, a novel stepwise extraction method has been examined. The guest molecules housed between the helices of the clathrate δ form of syndiotactic polystyrene can be removed completely with this method. A systematic study of the preparation of a solvent‐free mesophase (emptied clathrate) membrane, its helical and residual solvent contents, and its structural transformations has been performed. In this first attempt, an enhancement in the TTGG helical content has been observed in the extracted membrane, and a conceptual mechanism is proposed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 269–273, 2003