A computational study on the energetics and reactivity of some xanthene and thioxanthene derivatives

A computational study has been carried out for xanthene and thioxanthene homologous derivatives with keto, hydroxyl, carboxyl, and carboxamide functional groups on position 9, contributing to the understanding of their energetics and reactivity. For that it is presented and compared with the molecular structures, the electrostatic potential energy maps, and the electronic properties of all these heteropolycyclic compounds. The estimation of the standard molar enthalpy of formation, in the gaseous phase, at T = 298.15 K, was made only for the thioxanthydrol, thioxanthene-9-carboxylic acid, and thioxanthene-9-carboxamide using the experimental values available in the literature for the homologous compounds containing oxygen.     

Dibenzofuran and methyldibenzofuran derivatives: assessment of thermochemical data

Thermochemical data of dibenzofuran, a compound of considerable industrial and environmental significance, obtained from experimental calorimetric and computational techniques are reported in this work. The enthalpy of fusion, (19.4 ± 1.0) kJ mol^?1, at the temperature of fusion, (355.52 ± 0.02) K, was determined by differential scanning calorimetry measurements of dibenzofuran. From the standard (p° = 0.1 MPa) molar enthalpies of formation of crystalline dibenzofuran, (?29.2 ± 3.8) kJ mol^?1, and of sublimation, (84.5 ± 1.0) kJ mol^?1, determined at T = 298.15 K by static bomb combustion calorimetry and by vacuum drop microcalorimetry, respectively, it was possible to calculate the enthalpy of formation of the gaseous compound, (55.0 ± 3.9) kJ mol^?1, at the same temperature. The enthalpy of formation in the gaseous phase was also determined from G3(MP2)//B3LYP calculations. The same computational strategy was employed in the calculation of the standard molar enthalpies of formation, at T = 298.15 K, in the gas-phase, of single methylated derivatives of benzofuran and dibenzofuran.     

Development and Validation of a RP-HPLC–PDA Method for Determination of Curcuminoids in Microemulsions

A sensitive, specific and rapid high-performance liquid chromatography method was developed in an effort to quantify extremely low curcuminoid levels for the future transdermal experiments where the curcuminoids are incorporated with excipients such as microemulsion, liposomes, and micelles. The chromatographic separation was performed using a Symmetry^® C₁₈, 250 × 4.6 mm, 5-μm column, with a mobile phase composed of 5 mM acetonitrile:phosphoric acid (45:55, v/v) at a flow rate of 1.0 mL min^?1, it was sensitive with a low limit of quantitation for curcuminoids (0.626 ng mL^?1 for curcumin) and good linearity (r ² ≥ 0.999) over the range 1–100 ng mL^?1. All the validation data, such as accuracy and precision, were within the required limits from the ICH guideline. The assay method was successfully applied during forced degradation of curcuminoid solutions. The method retained its accuracy and precision when the standard addition technique was applied.     

Development and Validation of a RP-HPLC–PDA Method for Determination of Curcuminoids in Microemulsions

A sensitive, specific and rapid high-performance liquid chromatography method was developed in an effort to quantify extremely low curcuminoid levels for the future transdermal experiments where the curcuminoids are incorporated with excipients such as microemulsion, liposomes, and micelles. The chromatographic separation was performed using a Symmetry^® C₁₈, 250 × 4.6 mm, 5-μm column, with a mobile phase composed of 5 mM acetonitrile:phosphoric acid (45:55, v/v) at a flow rate of 1.0 mL min⁻¹, it was sensitive with a low limit of quantitation for curcuminoids (0.626 ng mL⁻¹ for curcumin) and good linearity (r ² ≥ 0.999) over the range 1–100 ng mL⁻¹. All the validation data, such as accuracy and precision, were within the required limits from the ICH guideline. The assay method was successfully applied during forced degradation of curcuminoid solutions. The method retained its accuracy and precision when the standard addition technique was applied.

     

Mechanisms of tannin-induced trypsin inhibition: a molecular approach

Association of procyanidins with enzymes has drawn attention over the past few years. This work aimed to bring insights on interaction of the protease trypsin with the procyanidin dimer (B3). This interaction was characterized by fluorescence quenching, saturation transfer difference (STD) NMR, molecular modeling, and through an enzymatic inhibition assay. Further studies were conducted regarding the influence of pectin on the binding process. A general overview of the binding process may be outlined as follows: a) at low procyanidin concentrations (below the critical micellar concentration-(CMC)) a specific interaction probably driven by hydrogen bonds between the protein backbone and the procyanidin occurs and is associated with the reduction of both enzyme activity and fluorescence; b) at high procyanidin concentration (above the CMC) the interaction becomes nonspecific. This variation in both nature and extent of the interaction with the variation of procyanidin concentration shows how tannin self-association may affect the interaction between tannins and proteins. It was also shown that the mechanism through which pectin affects the interaction between procyanidin B3 and trypsin is of a competitive type.     

Computational analysis and physico-chemical characterization of an inclusion compound between praziquantel and methyl-��-cyclodextrin for use as an alternative in the treatment of schistosomiasis

Schistosomiasis is still an endemic disease in many regions, with 250 million people infected with Schistosoma and about 500,000 deaths per year. Praziquantel (PZQ) is the drug of choice for schistosomiasis treatment, however it is classified as Class II in the Biopharmaceutics Classification System, as its low solubility hinders its performance in biological systems. The use of cyclodextrins is a useful tool to increase the solubility and bioavailability of drugs. The aim of this work was to prepare an inclusion compound of PZQ and methyl-??-cyclodextrin (MeCD), perform its physico-chemical characterization, and explore its in vitro cytotoxicity. SEM showed a change of the morphological characteristics of PZQ:MeCD crystals, and IR data supported this finding, with changes after interaction with MeCD including effects on the C?CH of the aromatic ring, observed at 758 cm^?1. Differential scanning calorimetry measurements revealed that complexation occurred in a 1:1 molar ratio, as evidenced by the lack of a PZQ transition temperature after inclusion into the MeCD cavity. In solution, the PZQ UV spectrum profile in the presence of MeCD was comparable to the PZQ spectrum in a hydrophobic solvent. Phase solubility diagrams showed that there was a 5.5-fold increase in PZQ solubility, and were indicative of a type A_L isotherm, that was used to determine an association constant (K_a) of 140.8 M^?1. No cytotoxicity of the PZQ:MeCD inclusion compound was observed in tests using 3T3 cells. The results suggest that the association of PZQ with MeCD could be a good alternative for the treatment of schistosomiasis.     

Clastogenic plasma factors in psoriasis--comparison of phototherapy and anti-TNF-α treatments

As previously described, Psoralen plus UVA (PUVA) therapy induces chromosome damage in psoriatic patients. This study evaluates whether these effects are transitory or persistent. In addition, we studied these effects after narrowband UVB (nUVB) and anti-tumor necrosis factor (TNF)-α treatments. Among 40 responder patients, 10 received PUVA, 10 nUVB, 10 Infliximab and 10 Etanercept. Disease activity was determined with Psoriasis Area and Severity Index. Chromosomal breakage was evaluated by the clastogenic factor (CF) test. Potential clastogenic agents, malondialdehyde (MDA) and TNF-α were measured. Before treatment, the plasma-adjusted clastogenic scores (ACS) of patients were increased. During treatment, a further increase in ACS was observed in both phototherapy groups. Chromosome damage persisted for PUVA patients at week 32, while it diminished after nUVB to ACS values lower than before treatment. MDA and TNF-α values were also increased at baseline. MDA decreased during treatment in all groups, but without reaching normal levels. Plasma TNF-α remained unchanged in PUVA and nUVB but decreased in both anti-TNF-α treatment groups. Psoriasis is accompanied by CF-induced chromosomal breakage that increases during PUVA and nUVB treatments. Plasma clastogenic activity persisted in the follow-up after PUVA, while after nUVB ACS returned to values even lower than baseline. Clastogenic activity during the induction phase with anti-TNF-α remained unchanged.     

Pyrolysis kinetics of elephant grass pretreated biomasses

The Elephant Grass (Pennisetum purpureum Schum) was pretreated by two independent processes, through washing with hot water (W-EG) and acid solution (AW-EG) to improve its energy properties to apply it in a thermochemical process conversion into fuel. The biomasses were analyzed by proximate and ultimate analysis; and the pyrolysis kinetics, before and after pretreatments, were evaluated by the apparent activation energy (E _a) for decomposition in the temperature range of greater volatile matter through the Model-free kinetics using thermogravimetric analysis data. The kinetics of the microcrystalline cellulose Avicel PH-101 was performed to evaluate the E _a result of pure cellulose. The pretreatments were efficient in increasing the volatile matter and heating value, decreasing moisture and ash content, and improving its energetic power to the application in fast pyrolysis process for bio-oil production. The TG results have shown that the reduction in ash content facilitates the pyrolysis process, increasing the volatile matter and decreasing the apparent activation energy required to biomasses degradation, due to less diffusional resistances to heat and mass transfer of W-EG and AW-EG. The Avicel PH-101 showed the highest value of apparent activated energy (E _a = 276.2 kJ mol^?1) which could be explained by its crystallinity, suggesting that crystalline cellulose regions are less accessible to heat diffusion than amorphous regions, requiring more energy to its degradation.     

Metal-sensitive and thermostable trypsin from the crevalle jack (<Emphasis Type="Italic">Caranx hippos</Emphasis>) pyloric caeca: purification and characterization

Background

Over the past decades, the economic development and world population growth has led to increased for food demand. Increasing the fish production is considered one of the alternatives to meet the increased food demand, but the processing of fish leads to by-products such as skin, bones and viscera, a source of environmental contamination. Fish viscera have been reported as an important source of digestive proteases with interesting characteristics for biotechnological processes. Thus, the aim of this study was to purify and to characterize a trypsin from the processing by-products of crevalle jack (Caranx hippos) fish.

Results

A 27.5 kDa trypsin with N-terminal amino acid sequence IVGGFECTPHVFAYQ was easily purified from the pyloric caeca of the crevalle jack. Its physicochemical and kinetic properties were evaluated using N-α-benzoyl-_DL-arginine-p-nitroanilide (BApNA) as substrate. In addition, the effects of various metal ions and specific protease inhibitors on trypsin activity were determined. Optimum pH and temperature were 8.0 and 50°C, respectively. After incubation at 50°C for 30 min the enzyme lost only 20% of its activity. K _m , k_cat, and k _cat /K _m values using BApNA as substrate were 0.689 mM, 6.9 s^-1, and 10 s^-1 mM^-1, respectively. High inhibition of trypsin activity was observed after incubation with Cd²⁺, Al³⁺, Zn²⁺, Cu²⁺, Pb²⁺, and Hg²⁺ at 1 mM, revealing high sensitivity of the enzyme to metal ions.

Conclusions

Extraction of a thermostable trypsin from by-products of the fishery industry confirms the potential of these materials as an alternative source of these biomolecules. Furthermore, the results suggest that this trypsin-like enzyme presents interesting biotechnological properties for industrial applications.

     

Magneto-optical properties of Cd(1-x)Mn(x)S nanoparticles: influences of magnetic doping, Mn2+ ions localization, and quantum confinement

Cd(1-x)Mn(x)S nanoparticles (NPs) were successfully grown in a glass matrix and investigated by optical absorption (OA), magnetic circularly polarized photoluminescence (MCPL) measurements, and magnetic force microscopy (MFM). The room temperature OA spectra have revealed the formation of two groups of Cd(1-x)Mn(x)S NPs with different sizes: bulk-like nanocrystals (NCs) and quantum dots (QDs). The MCPL spectra were recorded at 2.0 K with several magnetic fields up to 15 T, allowing a detailed comparison between the degrees of circular polarization of the two groups of NPs. The different behaviours of magneto-optical properties of bulk-like NCs and QDs were explained by taking into account a considerable alteration of exchange interaction between the carrier spins and the substitutional doping magnetic ions incorporated into the NPs. As a main result, we have demonstrated that self-purification is the dominant mechanism that controls the doping in semiconductor QDs grown by the melting-nucleation synthesis approach due to the relatively high temperature that was used in thermal annealing of samples.