Commissioning of a multi‐beamline femtoslicing facility at SOLEIL

The investigation of ultrafast dynamics, taking place on the few to sub‐picosecond time scale, is today a very active research area pursued in a variety of scientific domains. With the recent advent of X‐ray free‐electron lasers (XFELs), providing very intense X‐ray pulses of duration as short as a few femtoseconds, this research field has gained further momentum. As a consequence, the demand for access strongly exceeds the capacity of the very few XFEL facilities existing worldwide. This situation motivates the development of alternative sub‐picosecond pulsed X‐ray sources among which femtoslicing facilities at synchrotron radiation storage rings are standing out due to their tunability over an extended photon energy range and their high stability. Following the success of the femtoslicing installations at ALS, BESSY‐II, SLS and UVSOR, SOLEIL decided to implement a femtoslicing facility. Several challenges were faced, including operation at the highest electron beam energy ever, and achievement of slice separation exclusively with the natural dispersion function of the storage ring. SOLEIL's setup also enables, for the first time, delivering sub‐picosecond pulses simultaneously to several beamlines. This last feature enlarges the experimental capabilities of the facility, which covers the soft and hard X‐ray photon energy range. In this paper, the commissioning of this original femtoslicing facility is reported. Furthermore, it is shown that the slicing‐induced THz signal can be used to derive a quantitative estimate for the degree of energy exchange between the femtosecond infrared laser pulse and the circulating electron bunch.     

ELENA: the extra low energy anti-proton facility at CERN

At the last LEAP conference in Vancouver 2011 the authors stated that a project ”ELENA”, as an abbreviation for Extra Low ENergy Antiproton ring and as first discussed in 1982 for LEAR by H. Herr et al., was freshly proposed with a substantial new design and revised layout and that it was under consideration to be built at CERN. ELENA is an upgrade of the Anti-proton Decelerator (AD) at CERN and is devoted to special experiments with physics using low energy anti-protons. The main topics are the anti-hydrogen production and consecutive studies of the features of this anti-matter atom as well as the anti-proton nucleon interaction by testing the QED to high precision. During the last years the project underwent several steps in presentations at different committees at CERN and was finally approved such that the construction has started. ELENA will increase the number of useful anti-protons by about two orders of magnitude and will allow to serve up to four experiments simultaneously. Very first and convincing results from the experiments at the AD have been published recently. For high precision physics, however, it appears to be cumbersome, time consuming and ineffective when collecting the needed large numbers and high densities of anti-proton clouds with the present AD. Both the effectiveness and the availability for additional experiments at this unique facility will drastically increase, when the anti-proton beam of presently 5 MeV kinetic energy is reduced by the additional decelerator ELENA to 100 keV.     

The Control of Photochromism of [3H]-Naphthopyran Derivatives with Intramolecular CH-π Bonds

The photochromism of [3H]-naphthopyran derivatives can be switched from T-type to inverse- or P-type through the manipulation of relative thermodynamic stabilities of open isomers with intramolecular CH-π bonds.     

Insights into the mechanism of reaction of [(C5Me5)2Sm(II)(thf)2] with CO2 and COS by DFT studies

Reaction mechanisms for the oxidative reactions of CO(2) and COS with [(C(5)Me(5))(2)Sm] have been investigated by means of DFT methods. The experimental formation of oxalate and dithiocarbonate complexes is explained. Their formation involve the samarium(III) bimetallic complexes [(C(5)Me(5))(2)Sm-CO(2)-Sm(C(5)Me(5))(2)] and [(C(5)Me(5))(2)Sm-COS-Sm(C(5)Me(5))(2)] as intermediates, respectively, ruling out radical coupling for the formation of the oxalate complex.     

Quadracyclic Adenine: A Non‐Perturbing Fluorescent Adenine Analogue

Fluorescent‐base analogues (FBAs) comprise a group of increasingly important molecules for the investigation of nucleic acid structure and dynamics as well as of interactions between nucleic acids and other molecules. Here, we report on the synthesis, detailed spectroscopic characterisation and base‐pairing properties of a new environment‐sensitive fluorescent adenine analogue, quadracyclic adenine (qA). After developing an efficient route of synthesis for the phosphoramidite of qA it was incorporated into DNA in high yield by using standard solid‐phase synthesis procedures. In DNA qA serves as an adenine analogue that preserves the B‐form and, in contrast to most currently available FBAs, maintains or even increases the stability of the duplex. We demonstrate that, unlike fluorescent adenine analogues, such as the most commonly used one, 2‐aminopurine, and the recently developed triazole adenine, qA shows highly specific base‐pairing with thymine. Moreover, qA has an absorption band outside the absorption of the natural nucleobases (>300 nm) and can thus be selectively excited. Upon excitation the qA monomer displays a fluorescence quantum yield of 6.8 % with an emission maximum at 456 nm. More importantly, upon incorporation into DNA the fluorescence of qA is significantly less quenched than most FBAs. This results in quantum yields that in some sequences reach values that are up to fourfold higher than maximum values reported for 2‐aminopurine. To facilitate future utilisation of qA in biochemical and biophysical studies we investigated its fluorescence properties in greater detail and resolved its absorption band outside the DNA absorption region into distinct transition dipole moments. In conclusion, the unique combination of properties of qA make it a promising alternative to current fluorescent adenine analogues for future detailed studies of nucleic acid‐containing systems.     

Fast electro-optical mode in photo-aligned reflective deformed helix ferroelectric liquid crystal cells

The electro-optical behavior of deformed helix ferroelectric liquid crystal in reflective mode is described in this paper. The electrically controlled reflectance has been measured at subkilohertz driving voltage frequency for different polarizations of the incident light and compared quite successfully with the simulation results.     

Plastic behavior of some yield stress fluids: from creep to long-time yield

The yielding of several reversible yield stress fluids is studied during scissometric-like creep experiments. The temporal evolution of the apparent deformation is recorded for applied stresses close and below the usual yield stress. Similarly to solids, three main creep regimes are observed. First, a primary creep regime displaying a temporal power law evolution of the deformation rate occurs, followed by a temporal minimum, which leads to an apparent flow of the material. This local minimum, defined as the “transition time,” and the subsequent fluidization can be observed at long times. The evolution of this time as a function of the applied stress appears to follow a universal law reminiscent of fracture behavior in hard solids.     

Comparison of methods for calculating the shock hugoniot of mixtures

Various methods used to determine the shock Hugoniot of condensed phase multi-component mixtures are reviewed and compared to available experimental data. The assumptions inherent in the different models are presented in this overview and their implications are discussed. The comparisons of the various models demonstrate that the predicted shock Hugoniots are in good agreement with published data despite the simplifying assumptions that are associated with the models. Averaging models are shown to be among the simplest methods to implement and result in the closest agreement with experimental data.     

A closure approximation for nematic liquid crystals based on the canonical distribution subspace theory

 A closure approximation for nematic polymers is presented. It approximates the fourth rank order tensor in terms of lower rank tensors, and is derived in the framework of the canonical distribution subspace theory. This approach requires a choice of the class of distributions: Here the set of Bingham distributions is chosen, as already introduced by Chaubal and Leal (1998). The closure is written in a generic frame of reference, and in an explicit form, so that it can be easily implemented. Such formulation also permits studying the closure approximation with continuation tools, which rather completely describe the system dynamics. The predictions can then be compared with those obtained with the exact model. The shear flow is considered as a test, since this flow condition appears to be the most demanding for closure approximations for nematic polymers. Received: 30 November 1999/Accepted: 30 November 1999     

Production and Purification of Pectinase from Bacillus subtilis 15A-B92 and Its Biotechnological Applications

Enzymes that degrade pectin are called pectinases. Pectinases of microbial origin are used in juice clarification as the process is cost-effective. This study screened a pectinase-producing bacterium isolated from soil and identified as Bacillus subtilis 15A B-92 based on the 16S rRNA molecular technique. The purified pectinase from the isolate showed 99.6 U/mg specific activity and 11.6-fold purity. The molecular weight of the purified bacterial pectinase was 14.41 ± 1 kD. Optimum pectinase activity was found at pH 4.5 and 50 °C, and the enzyme was 100% stable for 3.5 h in these conditions. No enzymatic inhibition or activation effect was seen with Fe²⁺, Ca²⁺, or Mg²⁺. However, a slight inhibition was seen with Cu²⁺, Mn²⁺, and Zn²⁺. Tween 20 and 80 slightly inhibited the pectinase, whereas iodoacetic acid (IAA), ethylenediaminetetraacetate (EDTA), urea, and sodium dodecyl sulfate (SDS) showed potent inhibition. The bacterial pectinase degraded citrus pectin (100%); however, it was inactive in the presence of galactose. With citrus pectin as the substrate, the Km and Vmax were calculated as 1.72 mg/mL and 1609 U/g, respectively. The high affinity of pectinase for its substrate makes the process cost-effective when utilized in food industries. The obtained pectinase was able to clarify orange and apple juices, justifying its application in the food industry.