Isolation of isomangiferin from honeybush (Cyclopia subternata) using high-speed counter-current chromatography and high-performance liquid chromatography

Isomangiferin was isolated from Cyclopia subternata using a multi-step process including extraction, liquid–liquid partitioning, high-speed counter-current chromatography (HSCCC) and semi-preparative reversed-phase high-performance liquid chromatography (HPLC). Enrichment of phenolic compounds in a methanol extract of C. subternata leaves was conducted using liquid–liquid partitioning with ethyl acetate–methanol–water (1:1:2, v/v). The enriched fraction was further fractionated using HSCCC with a ternary solvent system consisting of tert-butyl methyl ether–n-butanol–acetonitrile–water (3:1:1:5, v/v). Isomangiferin was isolated by semi-preparative reversed-phase HPLC from a fraction containing mostly mangiferin and isomangiferin. The chemical structure of isomangiferin was confirmed by LC–high-resolution electrospray ionization MS, as well as one- and two-dimensional NMR spectroscopy.     

Ethylene/1‐heptene copolymers as interesting alternatives to 1‐octene‐based LLDPE: Molecular structure and physical properties

Classical linear low density polyethylenes (LLDPEs) are copolymers of ethylene and 1‐octene or 1‐hexene, respectively. In the past, other 1‐olefins have been tested as comonomers but the resulting LLDPEs were never commercialized as large scale products. The present study focuses on the use of 1‐heptene as an interesting comonomer for the synthesis of LLDPE. For a comparison of the molecular structure and the physical properties of 1‐heptene‐ and 1‐octene‐based LLDPEs, five Ziegler–Natta LLDPEs of varying comonomer contents based on 1‐heptene and 1‐octene, respectively, were acquired and analysed using advanced methods. The comonomer contents of the resins were between 0.35 and 6.4 mol %. Crystallization‐based techniques revealed similar bimodal distributions that are due to the formation of copolymer and polyethylene homopolymer fractions. The compositional distribution of the copolymers was studied by high‐temperature (HT) HPLC and HT‐2D‐LC. The analytical results indicate similar chemical heterogeneities and molar mass distributions of the two sets of LLDPE up to a comonomer content of 3 mol %. Similar to the molecular structure, the physical properties of the materials are quite similar. At comonomer contents of ≥3 mol % differences between the two sets of samples are seen that are attributed to differences in the abilities of 1‐heptene and 1‐octene in disrupting the crystal arrangements of the polymer chains in solid state. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 962–975     

Quest to enhance up-conversion efficiency: a comparison of anhydrous vs. hydrous synthesis of NaGdF4: Yb3+ and Tm3+ nanoparticles

A major challenge in the field of up-converting (UC) nanomaterials is to enhance their efficiencies. The –OH defects on the surface of the nanoparticles are thought to be the main cause of luminescence quenching, but there are no comparative studies in the literature showing the impact of anhydrous vs. hydrous synthesis on up-conversion efficiency. In this article, we present the synthesis of up-converting NaGdF₄: Yb⁺³, Tm⁺³ nanoparticles by two different methods: thermal decomposition of single source metal-organic anhydrous precursors [NaLn(TFA)₄(diglyme)] (Ln = Gd, Tm, Yb; TFA = trifluoroacetate) and room temperature co-precipitation using hydrated inorganic salts Ln(NO₃)₃·5H₂O (Ln = Gd, Tm, Yb), NaNO₃ and NH₄F in ethylene glycol. After a detailed study on the influence of solvents and the percentage of lanthanide dopant on the crystal phase of the up-converting nanoparticles (NPs) and their complete characterization, a comparative up-conversion study was carried out which revealed that the uniform nanospheres (av. size ～13 nm) obtained from the anhydrous SSP had significantly higher up-conversion efficiency than agglomerated nanorods (～197 nm in length and ～95 nm in width) produced from hydrated inorganic salts. An enhanced up-conversion quantum yield of 1.8% for the anhydrous sample validates the anhydrous precursor approach as a strategy to obtain small but highly emitting up-converting particles without requiring a silica or undoped matrix surface passivation layer.     

Novel heterometal-organic complexes as first single source precursors for up-converting NaY(Ln)F4 (Ln = Yb, Er, Tm) nanomaterials

First heterometal-organic single source precursors for NaYF(4) nanomaterials as a host matrix for up-conversion emission are reported. These novel heterobimetallic derivatives NaY(TFA)(4)(diglyme) (1), [Na(triglyme)(2)][Y(2)(TFA)(7)(THF)(2)] (2) and Na(2)Y(TFA)(5)(tetraglyme) (3) (TFA = trifluoroacetate), which were fully characterized by elemental analysis, FT-IR and (1)H NMR spectroscopy, TG-DTA data as well as single crystal X-ray structures, are advantageous in terms of being anhydrous and having lower decomposition temperatures in comparison to the homometallic precursor Y(TFA)(3)(H(2)O)(3). In addition, they also contain chelating glyme ligands, which act as capping reagents during decomposition to control the NaYF(4) particle size and render them monodisperse in organic solvents. On decomposition in 1-octadecene, the molecular derivatives 1 and 3 are converted, in the absence of any surfactant or capping reagent, to cubic NaYF(4) nanocrystals at significantly lower temperatures (below 250 °C). At higher temperature, a mixture of the cubic and hexagonal phases was obtained, the relative ratio of the two phases depending on the reaction temperature. A pure hexagonal phase, which is many folds more efficient for UC emission than the cubic phase, was obtained by calcining nanocrystals of mixed phase at 400 °C. In order to co-dope this host matrix with up-converting lanthanide cations, analogous complexes NaLn(TFA)(4)(diglyme) [Ln = Er (4), Tm (5), Yb (6)] and Na(2)Ln(TFA)(5)(tetraglyme) [Ln = Er (7), Yb (8)] were also prepared and characterized. The decomposition in 1-octadecene of suitable combinations and appropriate molar ratios of these yttrium, ytterbium and erbium/thulium derivatives gave cubic and/or hexagonal NaYF(4): Yb(3+), Er(3+)/Tm(3+) nanocrystals (NCs) capped by diglyme or tetraglyme ligands, which were characterized by IR, TG-DTA data, EDX analysis and TEM studies. Surface modification of these NCs by ligand exchange reactions with poly acrylic acid (PAA) and polyethyleneglycol (PEG) diacid 600 was also carried out to render them water soluble. The THF solutions of suitable combinations of the diglyme derivatives were also used to elaborate the thin films of NaYF(4):Yb(3+), Er(3+)/Tm(3+) on a glass or Si wafer substrate by spin coating. The multicolour up-conversion fluorescence was successfully realized in the Yb(3+)/Er(3+) (green/red) and Yb(3+)/Tm(3+) (blue/violet) co-doped NaYF(4) nanoparticles and thin films, which demonstrates that they are promising UC nanophosphors of immense practical interest. The up-conversion excitation pathways for the Er(3+)/Yb(3+) and Tm(3+)/Yb(3+) co-doped materials are discussed.     

The synthesis and crystal structure of CaCu3Mn4O12: A new ferromagnetic-perovskite-like compound

Single crystals of CaCu₃Mn₄O₁₂, a new ferromagnetic perovskite-like compound (T_c ? 160°C), have been synthesized at 50 kbar and 1000°C. By X-ray analysis it was found to be cubic (a = 7.241Å), space groupIm3 with two molecules per unit cell. The two Ca²⁺ and six Cu²⁺ cations occupy theA sites of the ideal perovskite structure, while the eight Mn⁴⁺ cations occupy theB sites. In theIm3 space group the sites occupied by the calcium and copper cations have different point symmetry and therefore the 12-oxygen polyhedra have different distortions. The Ca cations are surrounded by slightly distorted icosahedra, the CaO distance is 2.562Å. The twelve oxygens around the copper cations are arranged as three mutually perpendicular rectangles of different size, the smallest and the largest of which are almost squares. The three sets of Cu0 distances are 1.942, 2.707, and 3.181Å, respectively. The octahedral Mn0 distance is 1.915Å. This arrangement is similar to that found in NaMn₃Mn₄O₁₂. A comparison between the two structures and a discussion of their thermal data are given.     

Structural stability and electronic properties of AgInS<Subscript>2</Subscript> under pressure

We employ state-of-the-art ab initio density functional theory techniques to investigatethe structural, dynamical, mechanical stability and electronic properties of the ternaryAgInS₂ compoundsunder pressure. Using cohesive energy and enthalpy, we found that from the six potentialphases explored, the chalcopyrite and the orthorhombic structures were very competitive aszero pressure phases. A pressure-induced phase transition occurs around 1.78 GPa from the low pressure chalcopyritephase to a rhombohedral RH-AgInS₂ phase. The pressure phase transition around 1.78 GPa isaccompanied by notable changes in the volume and bulk modulus. The calculations of thephonon dispersions and elastic constants at different pressures showed that thechalcopyrite and the orthorhombic structures remained stable at all the selected pressure(0, 1.78 and 2.5 GPa), where detailed calculations were performed, while the rhombohedralstructure is only stable from the transition pressure 1.78 GPa. Pressure effect on thebandgap is minimal due to the small range of pressure considered in this study. Themeta-GGA MBJ functional predicts bandgaps which are in good agreement with availableexperimental values.     

Sur de nouveaux borates mixtes des métaux de transition isotypes de la warwickite

The isomorphism of borates CaLn³⁺BO₄ where Ln³⁺ stands for a small rare earth cation of Y³⁺, with the mineral warwickite (Fe,Mg)₃Ti(BO₄)₂ is demonstrated. The octahedral sites of the warwickite structure seem thus to accommodate rather large cations, like trivalent Y³⁺ or Dy³⁺ and bivalent Ca²⁺. The synthesis of several new transition-metal borates with this structure is reported. From a survey of all the warwickite-type compounds one comes to the conclusion that the structure is only stable when the size of the divalent cation M²⁺ is larger than that one of the trivalent M³⁺.     

Hairy PEO‐Silica Nanoparticles through Surface‐Initiated Polymerization of Ethylene Oxide

Summary: The grafting of poly(ethylene oxide) (PEO) onto silica nanoparticles was performed in situ by the ring‐opening polymerization of the oxirane monomer initiated from the mineral surface using aluminium isopropoxide as an initiator/heterogeneous catalyst. Alcohol groups were first introduced onto silica by reacting the surfacic silanols with prehydrolyzed 3‐glycidoxypropyl trimethoxysilane. The alcohol‐grafted silica played the role of a coinitiator/chain‐transfer agent in the polymerization reaction and enabled the formation of irreversibly bonded polymer chains. Silica nanoparticles containing up to 40 wt.‐% of a hairy layer of grafted PEO chains were successfully produced by this technique.

The grafting of poly(ethylene oxide) (PEO) onto silica nanoparticles by in‐situ ring‐opening polymerization of the oxirane monomer.     

Hydrogen CARS thermometry in a high-pressure H2–air flame. Test of H2 temperature accuracy and influence of line width by comparison with N2 CARS as reference

This work describes a further step towards the determination of the temperature accuracy of H₂ Q-branch CARS (Coherent Anti-Stokes Raman Scattering) at high pressure with regard to the influence of the H₂ line widths. In laminar steady H₂/air flames in the pressure range 1–15 bar and at fuel-rich conditions with stoichiometries between two and four, quasi-simultaneous temperature measurements were performed with H₂ and N₂ CARS. The temperature values deduced from H₂ CARS are in good agreement with the reference temperature from N₂ CARS. The influence of different line-width contributions on the accuracy of H₂ Q-branch thermometry was investigated in detail. Received: 10 April 2001 / Revised version: 22 May 2001 / Published online: 18 July 2001