Stericaliy Congested Molecules: 2,2′-[(Biaryldiyl)bis(oxy)]bis[1,3,2-oxazaphospholidines]

The original suggestion that a through-space mechanism was operative in the seven-bond J(P, P) coupling constant of 30.3 Hz observed for 3.3′-bis(1,1-dimethylethyl)-2,2′-[3,3′,5,5′-tetrakis(1,1-dimethylethyl)-1,1′-biphenyl-2,2′-diyl]bis(oxy)}bis[1,3,2-oxazaphospholidine] ( 1a )) was investigated. In the solid-state CP-MAS ³¹PNMR spectrum of 1a , two nonequivalent P -atoms were observed; sufficient resolution could not be obtained to determine whether P, P coupling was present. The preparation and spectral data of the N-methyl analogue 1b and of the acyclic N-isopropyl analogue 6 (Scheme 1) provided evidence that a) the essentially exclusive formation (R*, R*,S*)- 1a in the reaction of the disodium biphenyldiolate 3a with the phosphorochloridite 4a is the result of significant differences in the free energy of activation (ΔG*) for the formation of the various diastereoisomers due to the steric congestion within the molecule and that b) the magnitude of the observed P,P coupling is dependent upon the degree of conformational freedom within the molecule. In the ³¹P-NMR spectrum of the P-sulfide 7 , which was prepared by the reaction of la with sulfur, 2s resonances were observed that strongly suggested that the lone electrons pair on P are involved in the mechanism for the transmission of coupling data. The (4S,5R) -12 and (4R, 5S) -12 of la were prepared in a three-step reaction sequence starting from the corresponding enantiomerically pure norephredine 8 (Scheme 2). Both (4S, 5R)- and (4R, 5S) -12 were obtained as a diastereoisomer mixture that differ by the configuration of the axis of chirality, i.e., (R*R*,R*)- and (R*,S*,R*) -12 were obtained. The major diastereoisomer was obtained upon recrystallization, and the atropisomers were observed to equilibrate in solution by monitoring the H? C(5) resonance in the ¹H-NMR with time (ΔG° = 0.4 kcal/mol; Fig. 2). The process observed corresponds to the restricted rotation about the central single bond of the biphenyl system. The isolation of an atropisomer with only a single ortho substituent on each aryl ring is quite rare. In the ¹³C-NMR spectrum of both (R*,R*,R*)- and (R*,S*,R*) -12 , C(5) is two-bond-coupled to the oxazaphospholidine P-atom (²J(C(5),P((2)) = 8.5 Hz) that is further virtually coupled to the P-atom of the other oxazaphospholidine ring (7J(P(2),P(2′)) = 30 Hz; ⁹J(C(5),P(2′)) = 0 Hz; δ(P(2)) = δ(P(2′)) = 136 ppm. In the ³¹P-NMR spectrum of (R*,R*,S*) -12 , which was prepared from the racemic chloridite (mixture of three diastereoisomers was obtained), a ⁷J(P(2),P(2′) of 36 Hz was observed. These observations provide strong evidence that seven-bond P,P coupling occurs in all three diastereoisomers of 12 . The observed P,P coupling is both independent of the configuration of the chiral axis and the configuration of the asymmetric P-centers. This independence of P,P coupling upon the configuration on P implies also the independence of the observed coupling upon the orientation of the lone-pair of electrons on P provided that the conformations of the diastereoisomers are similar in solution. The X-ray crystal structure of the complex formed from 1a and dichloro(cycloocta-1,5-diene)platinum(II) was obtained and the solid-state structure discussed. The major diastereoisomer of (4S,5R) -12 was used as a chiral ligand in asymmetric hydrosilylation and hydrogenation reactions (Scheme 3).     

Settling of paraffin crystals in cooled middle distillate fuels

The mechanism of action of additives that control the sedimentation of paraffin crystals after their crystallization in model diesel oil has been studied by means of a new experimental approach. The chemical analysis of the crystals and detailed measurements of the sedimentation phenomenon give new insights into this complex process. Thus, the wax antisettling additives used for preventing wax crystal sedimentation adsorb at the surfaces of wax particles and provide them with enhanced colloidal stability. The settling rate is not related to the size of the crystals or the viscosity of the liquid medium, but to the ability of the additives to prevent the aggregation of wax crystals. The reported methodology makes it possible to investigate the fundamental mechanisms, but also to evaluate structure-activity relationships of the various additives used in the petroleum industry.     

Microrobotics and MEMS-based fabrication techniques for scaffold-based tissue engineering

Scaffold based tissue engineering strategies use cells, biomolecules and a scaffold to promote the repair and regeneration of tissues. Although scaffold-based tissue engineering approaches are being actively developed, most are still experimental, and it is not yet clear what defines an ideal scaffold/cell construct. Solid free form fabrication (SFF) techniques can precisely control matrix architecture (size, shape, interconnectivity, branching, geometry and orientation). The SFF methods enable the fabrication of scaffolds with various designs and material compositions, thus providing a control of mechanical properties, biological effects and degradation kinetics. This paper reviews the application of micro-robotics and MEMS-based fabrication techniques for scaffold design and fabrication. It also presents a novel robotic technique to fabricate scaffold/cell constructs for tissue engineering by the assembly of microscopic building blocks.     

Determination of As, Sb, Se, Te and Bi in milk by slurry sampling hydride generation atomic fluorescence spectrometry

A simple and fast analytical procedure has been developed for the determination of As, Sb, Se, Te and Bi in milk samples by hydride generation atomic fluorescence spectrometry (HG-AFS). Samples were treated with aqua regia for 10 min in an ultrasound water bath and pre-reduced with KBr for total Se and Te determination or with KI and ascorbic acid for total As and Sb, the determination of Bi being possible in all with or without pre-reduction. Slurries of samples, in the presence of antifoam A, were treated with NaBH₄ in HCl medium to obtain the corresponding hydrides, and AFS measurements were processed in front of external calibrations prepared and measured in the same way as samples. Results obtained by the developed procedure compare well with those found after microwave-assisted complete digestion of samples. The proposed method is simple and fast, and only 1 ml of milk is needed. The values obtained for detection limit are 2.5, 1.6, 3, 6 and 7 ng l⁻¹ for As, Sb, Se, Te and Bi respectively in the diluted samples, with average relative standard deviation values of 3.8, 3.1, 1.9, 6.4 and 1.2% for three independent analysis of a series of commercially available samples of different origin. Data found in Spanish market samples varied from 3.2±0.3 to 11.3±0.2 ng g⁻¹ As, from 3.1±0.2 to 11.6±0.4 ng g⁻¹ Sb, from 10.7±0.5 to 25.5±0.4 ng g⁻¹ Se, from 0.9±0.2 to 9.4±0.6 ng g⁻¹ Te and from 11.5±0.1 to 27.7±0.4 ng g⁻¹ Bi.     

Strengthening the Connection between Science,Society and Environment to Develop Future French and European Bioeconomies: Cutting-Edge Research of VAALBIO Team at UCCS

The development of the future French and European bioeconomies will involve developing new green chemical processes in which catalytic transformations are key. The VAALBIO team (valorization of alkanes and biomass) of the UCCS laboratory (Unité de Catalyse et Chimie du Solide) are working on various catalytic processes, either developing new catalysts and/or designing the whole catalytic processes. Our research is focused on both the fundamental and applied aspects of the processes. Through this review paper, we demonstrate the main topics developed by our team focusing mostly on oxygen- and hydrogen-related processes as well as on green hydrogen production and hybrid catalysis. The social impacts of the bioeconomy are also discussed applying the concept of the institutional compass.     

Folding Free Energy Determination of an RNA Three-Way Junction Using Fluctuation Theorems

Nonequilibrium work relations and fluctuation theorems permit us to extract equilibrium information from nonequilibrium measurements. They find application in single-molecule pulling experiments where molecular free energies can be determined from irreversible work measurements by using unidirectional (e.g., Jarzynski’s equality) and bidirectional (e.g., Crooks fluctuation theorem and Bennet’s acceptance ratio (BAR)) methods. However, irreversibility and the finite number of pulls limit their applicability: the higher the dissipation, the larger the number of pulls necessary to estimate ΔG within a few kBT. Here, we revisit pulling experiments on an RNA three-way junction (3WJ) that exhibits significant dissipation and work-distribution long tails upon mechanical unfolding. While bidirectional methods are more predictive, unidirectional methods are strongly biased. We also consider a cyclic protocol that combines the forward and reverse work values to increase the statistics of the measurements. For a fixed total experimental time, faster pulling rates permit us to efficiently sample rare events and reduce the bias, compensating for the increased dissipation. This analysis provides a more stringent test of the fluctuation theorem in the large irreversibility regime.     

Single crystal growth of La2(SO4)3 · 9 D2O

Single crystals of La₂(SO₄)₃ · 9 D₂O were grown from saturated D₂O solutions. According to X-ray diffraction measurements, the crystals have a hexagonal structure with unit cell parameters a = 10.996 Å and c = 8.077 Å (space group C–P6₃/m). Several physical properties were also determined (density, refractive indices, dielectric constants, specific heat, coefficient of linear expansion, microhardness).     

Binding Study of the [Ru(NH3)5pz]2+ Complex to Bile Anion Aggregates through Kinetic Measurements

The electron transfer reaction between [Ru(NH₃)₅pz]²⁺ and [Co(C₂O₄)₃]^3? was studied in the presence of monomers and aggregates of bile salts (sodium deoxycholate, sodium taurodeoxycholate, and sodium glycocholate) at 298.2 ± 0.1 K. The results show a decreasing rate constant with the successive addition of bile salts. To rationalize the trends of the reaction rate on the [bile salts], two models were used. One of them takes into account the aggregation feature by considering a stepwise self‐association between monomers, whereas the other assumes the formation of a critical micellar concentration. Binding constants between [Ru(NH₃)₅pz]²⁺ species and deoxycholate or taurodeoxycholate aggregates were higher than that for glycocholate aggregates. These results are consistent with the way in which the monomers are added to form the bile anion aggregates.