Comparative study on the determination of cephalexin in its dosage forms by spectrophotometry and HPLC with UV-vis detection

This paper discusses the spectrophotometric determination of cephalexin as the intact cephalexin or as its acid-induced degradation product. Cephalexin can be determined in the range 1 × 10^–5–18 × 10^–5 M with relative standard deviations of 5-1%. The limits of quantitation and detection were 10^–5 and 0.3 × 10^–5 M, respectively. These procedures were compared with reversed-phase HPLC determination. No interference was observed in the presence of common pharmaceutical adjuvants. The H-point standard additions method was applied in order to correct for the possible presence of the cephalexin precursor, 7-aminocephalosporanic acid; this improves the selectivity of the UV-vis spectrophotometric method.     

Ferromagnetism and chirality in two-dimensional cyanide-bridged bimetallic compounds

The combination of hexacyanoferrate(III) anions, [Fe(CN)(6)](3)(-), with nickel(II) complexes derived from the chiral ligand trans-cyclohexane-1,2-diamine (trans-chxn) affords the enantiopure layered compounds [Ni(trans-(1S,2S)-chxn)(2)](3)[Fe(CN)(6)](2).2H(2)O (1) and [Ni(trans-(1R,2R)-chxn)(2)](3)[Fe(CN)(6)](2).2H(2)O (2). These chiral systems behave as ferromagnets (T(c) = 13.8 K) with a relatively high coercive field (H(c) = 0.17 T) at 2 K. They also exhibit an unusual magnetic behavior at low temperatures that has been attributed to the dynamics of the magnetic domains in the ordered phase.     

New strategy for the asymmetric synthesis of phenyl ketone cyanohydrins: quaternization of cyanohydrins derived from 2-p-tolylsulfinyl benzaldehyde

[reaction: see text] Optically pure functionalized cyanohydrins derived from 1-[2-(p-tolylsulfinyl)phenyl] ethanone can be obtained by the reaction of 2-p-tolylsulfinyl benzaldehyde derived cyanohydrins with bases and further treatment with suitable electrophiles. High yields and excellent stereoselectivities (up to de >98%) were obtained for these remote 1,4-asymmetric induction processes controlled by a sulfinyl chiral inductor.     

Screening of acetogenin-producing plants in Brazilian flora

The acetogenins are strongly bioactive natural compounds present in the bark, roots, leaves, and seeds of manyAnnonaceae plants. They are modified fatty acids and their cytotoxicities have been determined for different biological models including the in vitro growth inhibition of several human cancer cell lines. Very low acetogenin yield (< 0.1 g%) has been found previously in native phytobiomass, and we have now investigated the nonpredatory exploitation of the seeds as acetogenin sources characterizing the seed triacylglycerols (dominant fraction; > 90% of the whole lipid extracts) as potential valuable by-products.     

The Potential Energies of Cohesion of a Crystalline Organic Enantiomer and the Racemate; on the Energy for the Liquid Racemate [1]

The cohesion potential energy of the crystal of one enantiomer of ethyl 3-cyano-3-(3,4-dimethyloxyphenyl)-2,2,4-trimethylpentanoate, −47.7 ± 0.1 kJ mol⁻¹ (0–90°C), was found out from the heat of sublimation (123.2 ± 5.1 kJ mol⁻¹, 78.6°C) and the kinetic energies for the gas phase and the crystal. It was found that the entropy function of Debye’s theory of solids mathematically agreed with the vibrational entropy of the gas (variationally obtained), allowing to disclose the vibrational energy using the Debye energy function (E _vib 835.0 kJ mol⁻¹ (78.6°C), E ⁰ included). E _kin for the crystal (771.1 kJ mol⁻¹ (78.6°C)) was obtained by Debye’s theory with the experimental heat capacity. The cohesion energy represented a moderate part of the sublimation energy. The cohesion energy of the racemic crystal, −44.2 kJ mol⁻¹, was obtained by the heat of formation of the crystal in the solid state (3.0 kJ mol⁻¹, 83.3°C) and E _kin for the crystal (by Debye’s theory). The decrease in cohesion on formation of the crystal accounted for the energy of formation. The change in potential energy on liquefaction of the racemate from the gas state was disclosed obtaining added-up E _{vib + rot} for the liquid in the way as to E _vib for the gas, the Debye entropy function being increasedly suited for the liquid (E _{vib + rot} 763.4 kJ mol⁻¹ (115.4°C)). Positive ΔE _pot, 13.0 kJ mol⁻¹, arised from the increase in electronic energy (Δ _l ν_mean − 154.3 cm⁻¹, by the dielectric nature of the liquid), added to the cohesion energy.     

Synthesis and Characterization of Sol-Gel Cu-ZrO2 and Fe-ZrO2 Catalysts

Fe-ZrO₂ and Cu-ZrO₂ xerogels were prepared by a sol-gel method. The effect of the hydrolysis catalyst during the gelation step, namely H₂SO₄ or NH₄OH, on the properties of the resulting materials was investigated by XRD, BET, TGA/DTA, TPD of ammonia, FTIR, and TPR. Fe-ZrO₂ and Cu-ZrO₂ xerogels, with sulfuric acid introduced as the hydrolysis catalyst, mainly crystallyzed in the tetragonal phase and exhibited larger surface area and acid amount than those obtained with NH₄OH. Ammonia TPD shows that copper promoted sulfated zirconia is the most acidic material. TGA and FTIR reveal that under oxidizing conditions sulfated zirconia promoted with iron and copper retains more sulfate species than unpromoted sulfated zirconia. Regardless of the hydrolysis catalyst employed, copper promoted catalysts calcined at 600°C, contain a large fraction of copper oxide specieseasily reduced at low temperatures. These copper oxide species are believed to have different environment and interactions with the surface oxygen vacancies of the zirconia support. A FeO-like phase appears to be the most probable one after reduction of Fe-ZrO₂ catalysts prepared with NH₄OH as the hydrolysis catalyst. The formation of Fe° species may be hindered by the high dispersion and interaction of Fe²⁺ ions with the zirconia support. On the other hand, the reduction peaks of iron oxide and sulfate species exhibit a considerable overlap in the TPR profiles of sulfated Fe-ZrO₂ samples. Hence, the nature of the supported phase in the latter samples is rather uncertain.     

A new method for reversible immobilization of thiol biomolecules based on solid-phase bound thiolsulfonate groups

A new method for the reversible immobilization of thiol bimolecules, e.g., thiolpeptides and thiolproteins, to beaded agarose and other solid phases is reported. The method consists of an activation and a coupling step. The activation is based on oxidation of disulfides (or thiol groups via disulfides) present in a solid phase by hydrogen peroxide at moderately acidic pH. This oxidation leads to disulfide oxides (thiolsulfinate groups of which the majority are further oxidized to thiolsulfonate). The thiolsulfonate groups react easily with thiol compounds, which become immobilized via disulfide bonds. The pH range for thiol coupling is wide (pH 5-8), but for most thiols the reaction seems to proceed faster at pH>7. The stability of the reactive group to hydrolysis, especially at neutral and weakly acidic pH, is very high. The activated gel, therefore, can be stored as a suspension at pH 5 for extended periods. The method has been used to reversibly immobilize glutathione, β-galactosidase, alcohol dehydrogenase, urease, and papain, all with exposed thiol groups as well as thiolated bovine serum albumin and sweet-potato β-amylase. Depending on the thiol content of starting thiol-agarose, thiol-sulfonate-agarose derivatives with different binding capacities can be obtained. Thus, up to 5.0 mg (16 μmol) glutathione and 15 mg thiol-protein/mL gel derivative have been immobilized.     

Modular bis(oxazoline) ligands for palladium catalyzed allylic alkylation: unprecedented conformational behaviour of a bis(oxazoline) palladium eta3-1,3-diphenylallyl complex

New families of enantiopure bis(oxazolines) with 4,5-trans (5 a-g) or 4,5-cis (6 c) stereochemistry at the individual rings have been prepared in high yield. Their eta(3)-allyl palladium complexes (8 a-g, 9 c and 10) have been used as catalytic precursors in allylic alkylation reactions with excellent enantioselectivities (up to 96 %) for the trans oxazoline derivatives, while Pd/6 c system was inactive. NMR studies on palladium eta(3)-1,3-diphenylallyl intermediates (11 a, c and e) showed the presence of syn/syn- and syn/anti-allyl isomers in solution; this resembles the first example of eta(3)-eta(1)-eta(3) isomerism in Pd allylic complexes containing bis(oxazolines) derived from malonic acid.     

Time‐resolved in situ tomography for the analysis of evolving metal‐foam granulates

An experimental setup has been developed that allows for capturing up to 25 tomograms s^?1 using the white X‐ray beam at the experimental station EDDI of BESSY II, Berlin, Germany. The key points are the use of a newly developed, precise and fast rotation stage, a very efficient scintillator and a fast CMOS camera. As a first application, the foaming of aluminium alloy granules at 923 K was investigated in situ. Formation and growth of bubbles in the liquid material were observed and found to be influenced by the limited thermal conductivity in the bulk granules. Changes that took place between two tomographic frames separated in time by 39 ms could be detected and analysed quantitatively.