A Restudy of Direct Chelatometric Titration of Vanadium(IV) with N-Benzoyl-N-phenylhydroxylamine as Indicator

This paper restudies the method of direct chelatometric titration of V(IV) with N-benzoyl-N-phenylhydroxylamine (BPHA) as indicator. The indicator functions entirely differently from indicators hitherto used in chelatometry. The solution contains two independent systems – the indicator and the titrand-titrant system – without any color changing species. The BPHA-V(V) chelate once formed as the result of aerial oxidation constitutes the indicator system and does not react with EDTA. Its color therefore remains unchanged throughout titration. It is not a metallochromic indicator. Its function is that of color-screening. The color of the titrant system deepens during titration, but does not change. The end-point is indicated by one color completely covering up the other. Hence, this method is of purely empirical nature.Received July 5, 2002; accepted February 11, 2003 Published online July 16, 2003     

Biosensors based on enzyme field-effect transistors for determination of some substrates and inhibitors

This paper is a review of the authors' publications concerning the development of biosensors based on enzyme field-effect transistors (ENFETs) for direct substrates or inhibitors analysis. Such biosensors were designed by using immobilised enzymes and ion-selective field-effect transistors (ISFETs). Highly specific, sensitive, simple, fast and cheap determination of different substances renders them as promising tools in medicine, biotechnology, environmental control, agriculture and the food industry.The biosensors based on ENFETs and direct enzyme analysis for determination of concentrations of different substrates (glucose, urea, penicillin, formaldehyde, creatinine, etc.) have been developed and their laboratory prototypes were fabricated. Improvement of the analytical characteristics of such biosensors may be achieved by using a differential mode of measurement, working solutions with different buffer concentrations and specific agents, negatively or positively charged additional membranes, or genetically modified enzymes. These approaches allow one to decrease the effect of the buffer capacity influence on the sensor response in an aim to increase the sensitivity of the biosensors and to extend their dynamic ranges.Biosensors for the determination of concentrations of different toxic substances (organophosphorous pesticides, heavy metal ions, hypochlorite, glycoalkaloids, etc.) were designed on the basis of reversible and/or irreversible enzyme inhibition effect(s). The conception of an enzymatic multibiosensor for the determination of different toxic substances based on the enzyme inhibition effect is also described.We will discuss the respective advantages and disadvantages of biosensors based on the ENFETs developed and also demonstrate their practical application.     

In vivo monitoring of the gastrooesophageal system using optical fibre sensors

In the present paper optical fibre sensors for the detection of foregut diseases are described, in particular, sensors for the detection of bile, carbon dioxide and pH. Bile-containing refluxes are measured by means of a sensor which uses bilirubin as natural marker. The sensor, which is already present on the market, has been clinically validated by various hospitals. The clinically relevant parameter is the exposure time of the stomach/oesophagus mucosa to the bile. When measured in the oesophagus, it has been shown to be closely correlated with the onset of Barrett's oesophagus or general oesophagitis. Recently, optical fibres have been proposed for the continuous monitoring of carbon dioxide in the stomach: an important parameter in critically ill patients. A clinically validated prototype has shown its superiority in comparison with the traditional method, that is based on gastric tonometry. For the sake of completeness, also gastric pH sensors are considered, although at the moment their development is stationary at the laboratory stage.     

Analysis of serotonin release from single neuron soma using capillary electrophoresis and laser-induced fluorescence with a pulsed deep-UV NeCu laser

The use of capillary electrophoresis (CE) with laser-induced fluorescence excited by ultraviolet (UV) lasers in the range 200–300 nm has been restricted by the available wavelengths and expense of UV lasers. The integration of a NeCu deep UV laser operating at 248.6 nm with a single channel CE system with post-column sheath flow detection allows detection limits for serotonin and tryptophan of 3.9×10^-8 M and 4.5×10^-8 M respectively. Single cell analysis of serotonergic metacerebral cells from the sea slug Aplysia californica yields a value of 800±85 fmol of serotonin in each cell soma. For the first time, serotonin is directly detected in electrically stimulated release from single metacerebral cell soma, with approximately 4% of the serotonin contained in the soma released from a semi-intact preparation with a 2 min electrical stimulation.     

Application of stir bar sorptive extraction for wine analysis

Stir bar sorptive extraction (SBSE) coupled with gas chromatography/mass spectrometry (GC/MS) was used to analyse wine samples for three applications: flavour and compositional analysis; 2,4,6-trichloroanisole (TCA), a common off-aroma in wine; and agrochemicals. SBSE was found to be orders of magnitude more sensitive than modern conventional methodology, allowing for lower detection and quantitation levels, and improved confirmation of identity; SBSE often gave better signal to noise in scan mode than other methods in selective ion monitoring (SIM) mode. With the help of their characteristic mass spectra all agrochemicals could be identified unambiguously at concentrations of 10 microg L(-1) in wine and a further 100 constituents were detected in a Cabernet Sauvignon sample. Thus it is now possible to analyse complex samples such as wine by scan mode, with better confirmation of identity, and without sacrificing sensitivity, where previously SIM methodology had to be used.     

Speciation analysis of tellurium by solid-phase extraction in the presence of ammonium pyrrolidine dithiocarbamate and inductively coupled plasma mass spectrometry

Under acidic conditions tellurium(IV) formed a complex with ammonium pyrrolidine dithiocarbamate (APDC). The tellurium(IV) complex was completely retained on a non-polar Isolute silica-based octadecyl (C(18)) sorbent-containing solid-phase extraction (SPE) cartridge, while the uncomplexed Te(VI) passed through the cartridge and remained as a free species in the solution. Only partial Te(IV) was retained on the SPE cartridge for samples without addition of APDC. On the basis of different retention behaviours of the complexed Te(IV) and uncomplexed Te(VI), a simple and highly sensitive method is proposed for the determination of total tellurium and Te(VI) by SPE separation and inductively coupled plasma mass spectrometry (ICP-MS) detection. The Te(IV) concentration was calculated as the difference between total tellurium and Te(VI) concentrations. The detection limit (3 sigma) is 3 ng L(-1) tellurium. Factors affecting the separation and detection of tellurium species were investigated. Coexisting ions did not show significant interferences with the Te(IV)-APDC complex retention and the subsequent ICP-MS detection of Te. The method has been successfully applied to the tellurium speciation analysis in waters with spiked recoveries for Te(IV) and Te(VI) of 86.0-108% and 87.1-97.4%, respectively.     

Interaction of zinc finger ZNF191(243—368) and its I323 W and R327W mutants with oligonucleotides by florescence spectrum

Two mutants of the zinc finger protein, ZNF191 (243–368) I323W and R327W, are successfully obtained by site-directed mutagenesis. The fluorescence spectrum is used to study the interaction between these two mutants and the oligonucleotides. The influence of the mutation on the interaction has been studied using ethidium bromide (EB) as the fluorescence probe. The binding constants of the I323W-DNA and R327W-DNA have been calculated and the possible binding models have been discussed.     

Nickel-oxide-based electrochromic films with optimized optical properties

Reactive DC magnetron sputtering was used to grow thin films of Ni (93%)-V (7%) oxide and Ni (62%)-Al (38%) oxide. Both films showed electrochromism in KOH. The addition of Al diminished the luminous absorbance significantly, while the charge capacity was maintained. The Al-containing films are superior to the conventional Ni oxide electrodes as regards applications requiring high-bleached-state transmittance.Presented at the 3rd International Meeting on Advanced Batteries and Accumulators, 16–20 June 2002, Brno, Czech Republic     

Photochemical reactions of M(CO)6 (M = Cr,Mo, W) with Ph2P(S)P(S)Ph2

New complexes {M(CO)₄[Ph₂P(S)P(S)Ph₂]} (M = Cr, Mo and W), (1a)–(3a), [(1a), M = Cr; (2a), M = Mo; (3a), M = W] and {M₂(CO)₁₀[-Ph₂P(S)P(S)Ph₂]} (M = Cr, Mo, W), [(1b)–(3b) [(1b), M = Cr; (2b), M = Mo; (3b), M = W]] have been prepared by the photochemical reaction of M(CO)₆ with Ph₂P(S)P(S)Ph₂ and characterized by elemental analyses, f.t.-i.r. and ³¹P-(¹H)-n.m.r. spectroscopy and by FAB-mass spectrometry. The spectra suggest cis-chelate bidentate coordination of the ligand in {M(CO)₄[Ph₂P(S)P(S)Ph₂]} and cis-bridging bidentate coordination of the ligand between two metals in (M = Cr, Mo and W).