Formation of Zn(1-x)MnxS nanowires within mesoporous silica of different pore sizes

Arrays of highly ordered Zn(1-x)MnxS quantum wires with x ranging from 0.01 to 0.3 and with lateral dimensions of 3, 6, and 9 nm were synthesized within mesoporous SiO2 host structures of the MCM-41 and SBA-15 type. The hexagonal symmetry of these arrays (space group p6m) and the high degree of order was confirmed by X-ray diffraction and transmission electron microscopy (TEM) studies. Physisorption measurements show the progressive filling of the pores of the SiO2 host structures, while TEM and Raman studies reveal the wire-like character of the incorporated Zn(1-x)MnxS nanostructures. X-ray absorption near-edge structure, extended X-ray absorption fine structure, photoluminescence excitation (PLE), and electron paramagnetic resonance studies confirm the good crystalline quality of the incorporated Zn(1-x)MnxS guest species and, in particular, that the Mn2+ ions are randomly distributed and are situated on tetrahedrally coordinated cation sites of the Zn(1-x)MnxS wires for all x up to 0.3. The amount of Mn2+ ions loosely bound to the surface of the Zn(1-x)MnxS nanowires is less than 4% of the total Mn content even for the 3 nm nanostructures up to the highest Mn content of x = 0.3. The effects of the reduction of the lateral dimensions on electronic properties of the diluted magnetic semiconductor were studied by PLE spectroscopy. Due to the quantum confinement of the excitons in the wires an increase of the direct band gap with decreasing particle size is observed.     

Preparation of highly selective stationary phases for high-performance liquid chromatographic separation of enantiomers by direct copolymerization of monomers with single or twin chiral ligands

Uniformly sized macroporous polymer beads, which can be used as chiral stationary phase (CSP), have been prepared by the staged templated suspension polymerization process using chiral monomer as one of the copolymerization components. This approach enables the preparation of CSPs for which properties such as pore size, pore volume, surface area, chemistry, and chiral ligands can be tuned over a broad range. Several types of well-defined chiral monomers were prepared and allowed to assess synergistic effect of multiple selectors attached to a branched linker as well as the effect of the length and chemistry of the linker. Microscale batch screening was used for simple and rapid evaluation of selectivity. The most promising candidate CSPs were prepared on a larger scale and packed into HPLC columns. Their performance was demonstrated on the separation of racemic N-(3,5-dinitrobenzoyl)-alpha-amino acid alkylamides. The highest separation factors alpha of up to 27 were observed for CSPs prepared from monomers containing the branched spacer. These highly selective CSPs also enabled the separation of larger amounts of the target racemates upon column overload conditions.     

A modular approach toward functionalized three-dimensional macromolecules: from synthetic concepts to practical applications

A new strategy for the preparation of functional, multiarm star polymers via nitroxide-mediated "living" radical polymerization has been explored. The generality of this approach to the synthesis of three-dimensional macromolecular architectures allows for the construction of nanoscopically defined materials from a wide range of different homo, block, and random copolymers combining both apolar and polar vinylic repeat units. Functional groups can also be included along the backbone or as peripheral/chain end groups, thereby modulating the reactivity and polarity of defined portions of the stars. This modular approach to the synthesis of three-dimensional macromolecules permits the application of these tailored materials as multifunctional hosts for hydrogen bonding, nanoparticle formation, and as scaffolds for catalytic groups. Examples of applications of the functional stars in catalysis include their use in a Heck-type coupling as well as an enantioselective addition reaction.     

Encapsulation of functional moieties within branched star polymers: effect of chain length and solvent on site isolation

Porphyrin and pyrene photoactive cores have been encapsulated within an isolating polymeric shell using an efficient and general strategy based on the use of dendritic initiators for the ring-opening polymerization of epsilon-caprolactone to yield functional core star polymers. The isolation of the core functionalities has been studied using fluorescence quenching and fluorescence resonance energy transfer (FRET) techniques as well as solvatochromic probes. With increasing chain length as well as solvent polarity, enhanced site isolation of the core has been observed. These findings have been correlated to actual molecular dimensions independently measured by pulsed field gradient spin-echo (PGSE) NMR. The developed synthetic methodology offers a rapid route to efficient encapsulation of functional moieties and therefore has potential for the design of new materials.     

Synthesis of enantiomerically enriched allenes by (-)-sparteine-mediated lithiation of alkynyl carbamates

[reaction: see text]. The alpha-deprotonation of alkynyl carbamates 3 with the chiral base (-)-sparteine (4)/n-butyllithium, transmetalation with ClTi(O(i)()Pr)3, and subsequent substitution with an aldehyde results in the formation of enantioenriched 4-hydroxyallenyl carbamates 11. Stereoselection is determined by dynamic resolution of the lithium/(-)-sparteine complexes by selective crystallization.     

Über die Polymerisation des Phosphornitrilchlorids II

Zusammenfassung Die Polymerisation des Phosphornitrilchlorids in Substanz erweist sich als thermisch gestartete Radikalpolymerisation, die mit gleicher Geschwindigkeit und gleicher Temperaturabhängigkeit wie die durch Sauerstoff aktivierte Polymerisation in Lösung verläuft. Schon geringer Lösungsmittelzusatz bringt die thermische Polymerisation zum Erliegen. Ein Reaktionsschema mit Start-Kette-Abbruch wird diskutiert, das sowohl die Substanz- wie die Lösungspolymerisation wiedergibt. Der seinerzeit beschriebene Einfluß von Sauerstoff auf den Ablauf der Polymerisation erfährt dadurch eine wesentliche Korrektur.Die Depolymerisation von polymerem Phosphornitrilchlorid wird von 350 bis 600° C verfolgt und als gegenläufige Reaktionsfolge zur Polymerisation gefunden. Für das aus Polymerisation und Depolymerisation resultierende Gleichgewicht werden Druck- und Temperaturabhängigkeit festgestellt.Mit 8 Abbildungen.Herrn Prof. Dr.A. Klemenc zu seinem 70. Geburtstage gewidmet.Als I soll die ArbeitPatat-Kollinsky ¹ Über die Polymerisation des Phosphornitrilchlorids¹ gelten, die im folgenden Text auch mit (I) bezeichnet wird.— Eine Literaturzusammenstellung Phosphornitrilchlorid findet sich in der Monographie vonL. F. Audrieth, R. Steinmann undA. O. F. Toy, Chem. Rev.32, 109 (1943).     

Full verification of the liquid exclusion-adsorption chromatography theory using monolithic capillary columns

Capillary electrochromatography (CEC) was used to separate alkyl phenol ethoxylates (APEs) as model diblock copolymers, with monolithic polymers as stationary phases. The order of elution indicate that the two polymer blocks follow distinct chromatographic modes: size-exclusion for the poly(oxyethylene) group and adsorption interaction for the alkyl part. Therefore, our experimental results were compared to the theory describing liquid exclusion-adsorption chromatography (LEAC). They were found in perfect agreement with the theory, which turned to be verified for the first time over the full range of polymer lengths.     

Organoaluminium and -gallium compounds with N,N-diisopropylaminomethyl groups

The N,N-diisopropylaminomethyl aluminium compound [tBu2AlCH2NiPr2 x LiCl]2(1) and the gallium compounds Li[tBu2Ga(CH2NiPr2)2](2) and [tBu2GaCH2N(H)iPr2]Cl x tBu3Ga (3) were prepared by transmetallation of N,N-diisopropylaminomethyllithium LiCH2NiPr2 with di-tert-butylaluminium or -gallium chloride, and characterised by elemental analyses, multinuclear NMR spectroscopy (1H, 13C, 27Al, 7Li) and IR spectroscopy. The crystal structures have been determined by single crystal X-ray diffraction. Compound aggregates as a centrosymmetric dimer, with two Al-C-N units connected by a frame of two LiCl molecules [Al-Cl 2.367(1), Cl-Li 2.339(4) and 2.374(4), Li-N 1.977(4)A]. Compound 2 is a lithium organogallate with two weak LiN bonds [1.965(7) and 1.937(7)A]. Compound 3 contains two different moieties: tBu3Ga and a [tBu2GaCH2N(H)iPr2]+ cation, which are bridged by a Cl- anion [Ga-Cl 2.445(1) and 2.579(1), HCl 2.362(3)A].     

Gravity-induced convective flow in microfluidic systems: electrochemical characterization and application to enzyme-linked immunosorbent assay tests

A way of using gravity flow to induce a linear convection within a microfluidic system is presented. It is shown and mathematically supported that tilting a 1 cm long covered microchannel is enough to generate flow rates up to 1000 nL.min(-1), which represents a linear velocity of 2.4 mm.s(-1). This paper also presents a method to monitor the microfluidic events occurring in a covered microchannel when a difference of pressure is applied to force a solution to flow in said covered microchannel, thanks to electrodes inserted in the microfluidic device. Gravity-induced flow monitored electrochemically is applied to the performance of a parallel-microchannel enzyme-linked immunosorbent assay (ELISA) of the thyroid-stimulating hormone (TSH) with electrochemical detection. A simple method for generating and monitoring fluid flows is described, which can, for instance, be used for controlling parallel assays in microsystems.