Total synthesis of everninomicin 13,384-1--Part 1: retrosynthetic analysis and synthesis of the A1B(A)C fragment

In this first of a series of four articles we introduce everninomicin 13,384-1 (1), a powerful antibiotic effective against drug resistant bacteria, as a target for total synthesis and discuss its retrosynthetic analysis. From the three defined fragments required for the synthesis (2: A1B(A)C fragment; 4: DE fragment; 5: FGHA2 fragment), we describe herein two approaches to the A1B(A)C block. The first strategy relied on an olefin metathesis reaction to construct a common intermediate for rings B and C, but was faced with final protecting group problems. The second, and successful approach, involved a 1,2-phenylsulfeno migration and a sulfur directed glycosidation procedure to link rings B and C, as well as an acyl fluoride intermediate to install the sterically hindered aryl ester moiety (ring A1). The final stages of the synthesis of the required 2-phenylseleno glycosyl fluoride 2 required introduction of a phenylseleno group at C-1 of ring C followed by a novel, DAST-promoted 1,2-migration to produce the desired 2-beta-phenylseleno glycosyl fluoride moiety.     

Comparative study on the determination of cephalexin in its dosage forms by spectrophotometry and HPLC with UV-vis detection

This paper discusses the spectrophotometric determination of cephalexin as the intact cephalexin or as its acid-induced degradation product. Cephalexin can be determined in the range 1 × 10^–5–18 × 10^–5 M with relative standard deviations of 5-1%. The limits of quantitation and detection were 10^–5 and 0.3 × 10^–5 M, respectively. These procedures were compared with reversed-phase HPLC determination. No interference was observed in the presence of common pharmaceutical adjuvants. The H-point standard additions method was applied in order to correct for the possible presence of the cephalexin precursor, 7-aminocephalosporanic acid; this improves the selectivity of the UV-vis spectrophotometric method.     

SFE of rosemary oil: Assessment of the influence of process variables and extract characterization

The effects of temperature and solvent density on the characteristics of the extracts obtained from supercritical fluid extraction (SFE) of the volatile compounds from Brazilian rosemary (Rosamarinus officianalis L., Labiatae) using carbon dioxide (CO₂) as solvent were investigated. The experiments were performed in a semi-batch laboratory scale home-made unit at two temperatures, viz. 310.15 and 320.15 K, over the pressure range of 100-160 bar. This study allowed to determine the crossover point and the maximum solubility of the oil. The products were analyzed by HRGC-MS, and compounds grouped in three different classes according to their molecular mass distribution in order to evaluate the influence of the variables studied on the characteristics of the extracts. The model proposed by Sovová was adopted in an attempt to interpret the mass transfer phenomena in the extraction process.     

Reactions of triacetic acid lactone with carbonyl compounds. X-Ray structure determination of 3-acetoacetyl-2-chromenone and 3,6,9,12-tetramethyl-1H,6H,7H,12H-6,12-methanodipyrano[4,3-b:4,3-f]-dioxocin-1,7-dione

The structure of 3-acetoacetyl-2-chromenone has been definitely assigned to the product resulting from the reaction of 4-hydroxy-6-methyl-2-pyrone, 1 , with 2-hydroxybenzaldehyde. Also, the reaction of the pyrone 1 with pentane-2,4-dione in a 2:1 molar ratio gives 3,6,9,12-tetramethyl-1H,6H,7H,12H-6,12-methanodypirano[4,3-b:4,3-f]dioxocin-1,7-dione. X-Ray analyses of both products are presented.     

Studies of lambert's reaction: The formation of [Mn2(CO)8(μ-AsR2)2] complexes from tertiary arsines and [Mn2(CO)10] at high temperatures

Although very bulky ligands e.g.(o-MeC₆H₄)₃E or (μ-C₁₀H₇)₃E (E = P or As) are inert, the normal photochemical or thermal reaction of tertiary phosphines or arsines, L, with [Mn₂(CO)₁₀] is CO substitution with the formation of [Mn₂(CO)₈(L)₂] derivatives (I). At elevated temperatures some triarylarsines, R₃As, undergo Lambert's reaction with ligand fragmentation to give [Mn₂(CO)₈(μ-AsR₂)₂] complexes (II) (R = Ph, p-MeOC₆H₄, p-FC₆H₄, or p-CIC₆H₄) even though, in the absence of [Mn₂(CO)₁₀] R₃As are stable under the same conditions. Exceptional behaviour is exhibited by (p-Me₂NC₆H₄)_3- As which forms a product of type I; by some HN(C₆H₄)₂AsR which give a product of type II as a result of loss of the non-aryl groups R = PhCH₂, cyclo-C₆H₁₁, or MeO; and by Ph(α-C₁₀H₇₂P which is the only phosphine to form a product of type II, albeit in trace amounts only. The thermal decomposition of a n-butanol solution of [Mn₂(CO)₈(AsPh₃)₂] in a sealed tube gives C₆H₆ and [Mn₂(CO)₈(α-AsPh₂)₂], whilst in an open system in the presence of various tertiary phosphines, L, [Mn(H)(CO)₃(L)₂] are obtained. It is suggested that Lambert's reaction is a thermal fragmentation of [Mn(CO)₄(AsR₃]^* radicals, the first to be recognised. They lose the radical R^* which abstracts hydrogen from the solvent. The resulting [Mn(CO)₄(AsR₂)] moiety dimerises to [Mn₂(CO)_8-(α-AsR₂)₂]. the reaction is facilitated by the stability of the departing radical (e.g. PhCH₂ or MeO) and, as the crowding about As is relieved, by its size (e.g. Ph, cyclo-C₆H₁₁, o-MeC₆H₄, or α-C₁₀H₇). In general, phosphine-substituted radicals [Mn(CO)₄(PR)₃]^* do not undergo this decomposition, probably because the PC bonds are much stronger than AsC.     

Influence of cyclodextrins on nitrosation of drugs

The World Health Organization issued a nitrosation procedure (NAP Test) which allows to carry out nitrosation under standard conditions. It has proved that the in vitro reaction rates of the fast nitrosatable drugs piperazine, cimetidine and ethambutol are not influenced by -, - and -cyclodextrin. On the contrary, -, -cyclodextrin and heptakis-2,6-di-O-methyl--cyclodextrin enhance the nitrosation of the slower nitrosatable 1-ephedrine and fencamfamine significantly. This possible reaction must be considered if nitrosatable drugs are formulated with cyclodextrins to be administered to human beings.     

pH-dependent electrochemical behaviour of hydrophilic ampholytic membranes

Ampholytic membranes were synthesized by copolymerizing (2-hydroxyethyl)methacrylate as the hydrophilic component, methacrylic acid and (N,N-diethylaminoethyl)methacrylate as ionogenic components (both ionogenic monomers in amounts 2.5 mol% or 10 mol%), and ethylenedimethacrylate as the crosslinking agent (3,5 or 10 mol%). The effects of pH on the swelling and membrane potentials of the membranes were investigated. The dependence of the membrane potentials on pH is characterized by the position of the isoelectric point and by the slope of the straight part of the dependence. This slope reflects the attained degree of ideality of the membrane. By varying the degree of cross linking and the content of ionogenic components, it is possible to vary the pH-dependent response of the membranes.     

Determination of As, Sb, Se, Te and Bi in milk by slurry sampling hydride generation atomic fluorescence spectrometry

A simple and fast analytical procedure has been developed for the determination of As, Sb, Se, Te and Bi in milk samples by hydride generation atomic fluorescence spectrometry (HG-AFS). Samples were treated with aqua regia for 10 min in an ultrasound water bath and pre-reduced with KBr for total Se and Te determination or with KI and ascorbic acid for total As and Sb, the determination of Bi being possible in all with or without pre-reduction. Slurries of samples, in the presence of antifoam A, were treated with NaBH₄ in HCl medium to obtain the corresponding hydrides, and AFS measurements were processed in front of external calibrations prepared and measured in the same way as samples. Results obtained by the developed procedure compare well with those found after microwave-assisted complete digestion of samples. The proposed method is simple and fast, and only 1 ml of milk is needed. The values obtained for detection limit are 2.5, 1.6, 3, 6 and 7 ng l⁻¹ for As, Sb, Se, Te and Bi respectively in the diluted samples, with average relative standard deviation values of 3.8, 3.1, 1.9, 6.4 and 1.2% for three independent analysis of a series of commercially available samples of different origin. Data found in Spanish market samples varied from 3.2±0.3 to 11.3±0.2 ng g⁻¹ As, from 3.1±0.2 to 11.6±0.4 ng g⁻¹ Sb, from 10.7±0.5 to 25.5±0.4 ng g⁻¹ Se, from 0.9±0.2 to 9.4±0.6 ng g⁻¹ Te and from 11.5±0.1 to 27.7±0.4 ng g⁻¹ Bi.     

Formation of two isomeric closo-[(eta5-C5H5)FePC2B8H10] phosphadicarbaborane analogues of ferrocene via isolable eta1-bonded complexes of the [7-[(eta5-C5H5)Fe(CO)2]-(eta1-nido-PC2B8H10)] type

The reaction of nido-[7,8,9-PC(2)B(8)H(11)] (1) with [[CpFe(CO)(2)](2)] (Cp=eta(5)-C(5)H(5) (-)) in benzene (reflux, 3 days) gave an eta(1)-bonded complex [7-Fp-(eta(1)-nido-7,8,9,-PC(2)B(8)H(10))] (2; Fp=CpFe(CO)(2); yield 38 %). A similar reaction at elevated temperatures (xylene, reflux 24 h) gave the isomeric complex [7-Fp-(eta(1)-nido-7,9,10-PC(2)B(8)H(10))] (3; yield 28 %) together with the fully sandwiched complexes [1-Cp-closo-1,2,4,5-FePC(2)B(8)H(10)] 4 a (yield 30%) and [1-Cp-closo-1,2,4,8-FePC(2)B(8)H(10)] 4 b (yield 5%). Compounds 2 and 3 are isolable intermediates along the full eta(5)-complexation pathway of the phosphadicarbaborane cage; their heating (xylene, reflux, 24 h) leads finally to the isolation of compounds 4 a (yields 46 and 52%, respectively) and 4 b (yields 4 and 5%, respectively). Moreover, compound 3 is isolated as a side product from the heating of 2 (yield 10%). The structure of compound 4 a was determined by an X-ray structural analysis and the constitution of all compounds is consistent with the results of mass spectrometry and IR spectroscopy. Multinuclear ((1)H, (11)B, (31)P, and (13)C), two-dimensional [(11)B-(11)B]-COSY, and (1)H[(11)B(selective)] magnetic resonance measurements led to complete assignments of all resonances and are in excellent agreement with the structures proposed.     

Liquid chromatographic determination of aliphatic amines in water using solid support assisted derivatization with 9-fluorenylmethyl chloroformate

Summary A simple and sensitive method has been developed for the liquid chromatographic determination of short-chain aliphatic amines in water. Analytes are retained in solid-phase extraction (SPE) cartridges, and then derivatized by drawing an aliquot of the fluorogeneic reagent 9-fluorenylmethyl chloroformate (FMOC) through the cartridges. After a certain reaction time the derivatives formed are desorbed with acetonitrile. The collected extracts are then chromatographed on a LiChrospher 100 RP₁₈ 125 mm×4 mm i.d., 5 μm, column using an acetonitrile-water gradient. The influence of experimental conditions (SPE material, volume of sample, concentration of FMOC, time of reaction and pH) has been investigated. Optimal results have been obtained with C₁₈ SPE cartridges using a sample volume of 5.0 mL. For derivatization, 0.25 mL aliquots of 25 mM FMOC have been used, the reaction time being only 2 min. The method has been applied to the quantification of several aliphatic amines: methylamine, ethylamine, dimethylamine,n-butylamine,n-pentylamine andn-hexylamine. Under the proposed conditions the percentages of analytes retained plus derivatized were of about 54–107% compared to those obtained with direct solution derivatization. The method provided good reproducibility, linearity and accuracy within the 0.050–1.0 mg L⁻¹ concentration range. The limits of detection were in the 0.25–5.0 μg L⁻¹ range. The utility of the described approach has been tested by analysing tap water, river water and industrial waste water.