Salting-in of alcohols in aqueous solutions by tetraalkylammonium bromides at the freezing temperature

The freezing-point depression of the ternary systems tetraalkylammonium bromides-t-butanol-water for the first five homologs of R₄NBr was measured. In the case of Bu₄NBr, the effect of size of the alcohol (methahol ton-butanol) was also investigated. From the corresponding freezing-point data for the binary systems the apparent salting constants were calculated. The true salting constantsk _s were obtained by extrapolation to infinite dilution. These are all very close to zero at the freezing temperature. From the corresponding thermochemical data the temperature dependence ofk _s was calculated, and above 5°C all the R₄NBr salts int-butanol; the salting-in increases with temperature and with the size of the hydrophobic cations. The scaled-particle theory is at present the only one which can account semiquantitatively for the temperature dependence of the salting-in effect. On leave of absence from Chemistry Department, The University, Sheffield S3 7HF, England To whom correspondence should be addressed.     

Thermolyse des β-énaminodiesters cycliques: Accès à divers β-énaminoesters, β-énaminothioesters et β-enaminoamides.

A new synthesis of β-enaminoesters, β-enaminothioesters et β-enaminoamides by thermic decomposition of β-enaminodiesters is described.     

Derivative spectrophotometric resolution of mixtures of the food colourants Tartrazine, Amaranth and Curcumin in a micellar medium

A study of the absorption spectra of the food colourants Tartrazine (E-102), Amaranth (E-123) and Curcumin (E-100) in various organic solvents and pH media, have been carried out. In addition, the spectral behaviour in aqueous micellar systems of anionic, cationic and non-ionic surfactants, as well as beta-cyclodextrin, was investigated. Analytical methods are proposed for the determination of the three dyes in mixtures without any prior separation step, by the application of the derivative technique to the normal absorption spectra, based on the use of cetyltrimethylammonium bromide (CTAB) in 0.1 M NaOH, over the concentration range 2-50 mug ml(-1). The methods are applied for determining the three dyes in commercial food products.     

Thermodynamic properties of alkali halides. IV. Apparent molal volumes,expansibilities, compressibilities,and heat capacities in urea-water mixtures

The apparent molal volume φ_v, expansibility φ_E, compressibility φ_K, and heat capacity φ_c of NaCl were measured in urea-water mixtures, as a function of salt (<1.5m) and urea (<13m) concentrations at 25°C. At a fixed urea concentration, the transfer functions from H₂O to 3m urea are linear functions of the NaCl aquamolality. At a fixed salt aquamolality, (0.1m), the sign of the transfer functions is in the direction of a decrease in the structure-breaking effect, and the absolute values of the transfer functions tend to level off at high urea concentrations (13m). The functions φ_v, φ_E, φ_K, φ_c, and (?φ_v/?T)_p were measured for the sodium halides and alkali, bromides (chlorides in the case of φ_K) at a fixed salt aquamolality of 0.1m and fixed urea molality of 3m. The corresponding transfer functions from H₂O to 3m urea are opposite those from H₂O to D₂O and similarly are relatively independent of ionic size. This suggests that urea, shows no specific interaction affinity for ions and that the overall number of water molecules influenced by the ions is relatively constant for all alkali halides. The lithium halides are an exception in that Li⁺ seems to have hardly any structure-breaking effect.     

Synthesis and acid-base properties of (1H-benzimidazol-2-yl-methyl)phosphonate (Bimp2-). Evidence for intramolecular hydrogen-bond formation in aqueous solution between (N-1)H and the phosphonate group

The synthesis of (1H-benzimidazol-2-yl-methyl)phosphonic acid, H2(Bimp)+/-, is described: 2-chloromethylbenzimidazole was reacted with ethylchloroformate to give 1-carboethoxy-2-chloromethylbenzimidazole which was treated with trimethyl phosphite and after hydrolysis with aqueous HBr H2(Bimp)+/- was obtained. In H2(Bimp)+/- one proton is at the N-3 site and the other at the phosphonate group; both acidity constants were determined in aqueous solution by potentiometric pH titrations (25 degrees C; I = 0.1 M, NaNO3) and this furnished the pKa values of 5.37 +/- 0.02 and 7.41 +/- 0.02, respectively. The acidity constant for the release of the primary proton from the P(O)(OH)2 group of H3(Bimp)+ was estimated: pKa = 1.5 +/- 0.2. Moreover, Bimp2- can be further deprotonated at its neutral (N-1/N-3)H site to give the benzimidazolate residue, but this reaction occurs only in strongly alkaline solution (KOH); application of the H_ scale developed by G. Yagil (J. Phys. Chem., 1967, 71, 1034) together with UV spectrophotometric measurements gave pKa = 14.65 +/- 0.12. Comparisons with acidity constants taken from the literature show that this latter pKa value is far too large and this allows the conclusion that an intramolecular hydrogen bond is formed between the (N-1/N-3)H site and the phosphonate group of Bimp2-; the formation degree of this hydrogen-bonded isomer is estimated to be 98 +/- 2%. The general relevance of this and the other results are shortly discussed and the species distribution for the Bimp system in dependence on pH is provided.     

The relative influences of acidity and polarity on responsiveness of small organic molecules to analysis with negative ion electrospray ionization mass spectrometry (ESI-MS)

The purpose of the work presented here was to evaluate the influence of solution composition and analyte characteristics on responsiveness to analysis with negative ion electrospray ionization mass spectrometry. The responses of a series of structurally diverse acidic molecules were compared in various solvents. Response was generally observed to be higher in methanol than acetonitrile and response for all analytes was poorer when water was mixed with the organic solvent. A positive correlation between negative ion ESI-MS response and log P was observed when either acetonitrile or methanol was used as the electrospray solvent. This result was expected because analytes with significant nonpolar character should be particularly responsive to ESI-MS analysis due to their higher affinity for electrospray droplet surfaces. It was also predicted that highly acidic analytes would be most responsive to analysis with negative ion ESI-MS due to their tendency to form negative ions. However, for the analytes studied here, acidity was found not to have a consistent influence on ESI-MS response. Many of the highly acidic molecules were quite polar and, consequently, were poorly responsive. Furthermore, the deprotonated molecular ion was detected for a number of molecules with very high pKa values, which would not be expected to form negative ions in the bulk solution. Ultimately, these results indicate that acidity is not a conclusive parameter for prediction of the relative magnitudes of negative ion ESI-MS response among a diverse series of analytes. Analyte polarity does; however, appear to be useful for this purpose.     

Arsenite oxidation and arsenate determination by the molybdene blue method

Based on the similarity in properties of arsenate and phosphate, the colorimetric method using the molybdene blue complex was tested in order to determine low As(V) concentration in waters. The influence of complex formation time, daylight, temperature and competitive anions (silicate and sulphate) upon complex formation was determined. Optimal complex formation was reached in 1 h at 20±1 °C and was slightly favoured when developed in daylight. The formation rate declined with decreasing reaction temperature and no influence of any of the competitive anions tested (at concentrations usually found in natural waters of granitic areas) was noted. The detection limit of this method was 20 μg As(V) l⁻¹. This simple, fast and sensitive arsenic determination method is suitable for field analysis, especially for waters containing low levels of phosphate and organic matter. Through arsenate determination, this colorimetric method allowed the arsenite oxidation efficiency of five common industrial oxidants to be compared. H₂O₂ and MnO_2(s) were not considered as effective oxidants as a high excess was necessary to ensure As(III) oxidation. NaOCl and KMnO₄ were promising oxidants as they allowed complete arsenite oxidation with a small excess for NaOCl or even less than the electron stoichiometric ratio in the case of KMnO₄. FeCl₃ was the most effective oxidant among the reagents tested here.     

Noncovalent functionalization of multi-walled carbon nanotubes by pyrene containing polymers

Multi-walled carbon nanotubes (MWNTs) have been solubilized in water and in various organic solvents by noncovalent side-wall functionalization by pyrene containing polymers.     

Epoxides,cyclic sulfites,and sulfate from natural pentacyclic triterpenoids: theoretical calculations and chemical transformations

Several triterpenic derivatives, with the A-ring functionalized, were semisynthesized from oleanolic and maslinic acids. The reactivities of sulfites, sulfate, and epoxides in these triterpene compounds were investigated under different reaction conditions. Moreover, contracted A-ring triterpenes (five-membered rings) were obtained, by different treatments of the sulfate 7. From the epoxide 8, deoxygenated and halohydrin derivatives were semisynthesized with several nucleophiles. Ozonolysis and Beckmann reactions were used to yield 4-aza compounds, from five-membered ring olanediene triterpenes. The X-ray structure of sulfate 7 is given and compared with density functional theory geometries. Theoretical (13)C and (1)H chemical shifts (gauge-invariant atomic orbital method at the B3LYP/6-31G*//B3LYP/6-31G* level) and (3)J(H,H) coupling constants were calculated for compounds 5-9 and 34-36, identifying the (R)- or (S)-sulfur and alpha- or beta-epoxide configurations together with 4-aza or 3-aza structures.     

Beitrag zur Kenntnis der Pt(II)-Verbindungen mit Acetoxim

Zusammenfassung Es wurde die thermische Zersetzung dercis-undtrans-Isomeren des [PtAox ₂Cl₂] sowie des [PtAox ₃Cl]Cl mit Hilfe derTG-undTD-Kurven im Falle des reinen Komplexes sowie im Falle einer Mischung mit Al₂O₃ (1:3) geklärt. Dietrans-Form ist stabiler als diecis-Form, die Zersetzung wird durch Al₂O₃ nicht beeinflu\t. [PtAox ₃Cl]Cl wird infolge der Erhitzung in die stabileretrans-Form [PtAox ₂Cl₂] umgewandelt und verhält sich auch weiterhin wie diese.

---

A contribution to the study of the compounds of Pt(II) with acetoxime

The thermal decomposition ofcis- andtrans-[PtAox ₂Cl₂] and of [PtAox ₃Cl]Cl was studied by means ofTGA andTDA on pure substances as well as on mixtures with Al₂O₃ (1:3). Thetrans form is more stable then thecis form, the presence of Al₂O₃ has no influence on its decomposition. The [PtAox ₃Cl]Cl is transformed by heating into the more stabletrans-isomer and its further behaviour is identical with that of thetrans isomer.

---

---

Mit 4 Abbildung