Rubbing-induced anisotropy of long alkyl side chains at polyimide surfaces

Molecular organization at polyimide surfaces used as alignment layers in liquid crystal displays was investigated using vibrational sum frequency generation (SFG) spectroscopy. We focus on the orientation of the long alkyl side groups at the polymer surface using polarization-selected SFG spectra of the CH(3)- and CH(2)-stretch modes of the side chain. Mechanical rubbing and baking, an accepted industrial procedure used to produce pretilt of the liquid crystal, was found to induce pronounced azimuthal anisotropy in the orientational distribution of the alkyl side chains. Orientational analysis of the SFG vibrational spectra in terms of the azimuthal and tilt angles (in and out of plane, respectively) of the alkyl side chains shows their preferential tilt along the rubbing direction, with the azimuthal distribution narrower for stronger rubbed polymer samples.     

On conformally flat contact metric manifolds

In the present paper we classify the conformally flat contact metric manifolds of dimension satisfying . We prove that these manifolds are Sasakian of constant curvature 1.     

Access to Paullone Analogues by Intramolecular Heck Reaction

The syntheses of paullone ( 1a ) and three paullone derivatives, including a sulfur analogue ( 2a ), a tricyclic derivative ( 2b ), and a ring‐enlarged variant ( 2c ), are described, Pd‐catalyzed intramolecular Heck reaction being the key step. The kinase‐inhibitory properties of the novel paullone analogues were investigated.     

Hexacyanometalate molecular chemistry: di-, tri-, tetra-, hexa- and heptanuclear heterobimetallic complexes; control of nuclearity and structural anisotropy

Following a bottom-up approach to nanomaterials, we present a rational synthetic route to high-spin and anisotropic molecules based on hexacyanometalate [M(CN)(6)](3-) cores. Part 1 of this series was devoted to isotropic heptanuclear clusters; herein, we discuss the nuclearity and the structural anisotropy of nickel(II) derivatives. By changing either the stoichiometry, the nature of the terminal ligand, or the counterion, it is possible to tune the nuclearity of the polynuclear compounds and therefore to control the structural anisotropy. We present the synthesis and the characterisation by mass spectrometry, X-ray crystallography and magnetic susceptibility of bi-, tri-, tetra-, hexa- and heptanuclear species [M(CN)(n)(CN-M'L)(6-n)](m+) (with n=0-5; M=Cr(III), Co(III), M'=Ni(II); L=pentadentate ligand). Thus, with M=Cr(III), d(3), S=3/2, a dinuclear complex [Cr(III)(CN)(5)(CN-NiL(n))](9+), (L(n)=polydentate ligand) was built and characterised, showing a spin ground state, S(G)=5/2, with a ferromagnetic interaction J(Cr,Cu)=+18.5 cm(-1). With M=Co(III) (d(6), S=0) were built di-, tri-, tetra-, hexa and hepanuclear CoNi species: CoNi, CoNi(2), CoNi(3), CoNi(5) and CoNi(6). By a first approximation, they behave as one, two, three, five and six isolated nickel(II) complexes, respectively, but more accurate studies allow us to evaluate the weak antiferromagnetic coupling constant between two next-nearest neighbours M'-Co-M'.     

Identification of the elastic properties of an artificial capsule membrane with the compression test: effect of thickness

The mechanical properties of a capsule membrane are evaluated by means of a compression experiment between two parallel plates. Since large deformations of the membrane are involved, the choice of the wall material constitutive law is essential. In this paper, we explore different classical laws to describe the behavior of the membrane and evaluate also the limit of application of the thin shell approximation. A numerical study of the compression process is performed using Abaqus software and an inverse method is used to identify the material constants of the constitutive laws. The comparison between the model predictions and experimental measurements on capsules with serum albumin-alginate membranes, indicates that the thin shell approximation is valid only for thickness to radius ratios up to 5% and that thick membranes obey non linear elastomer type constitutive laws. The Young modulus of the membrane material is found to increase non-linearly with membrane thickness, thus indicating that fabrication of thicker serum albumin-alginate walls results in capsules stiffer than expected.     

Carbamazepine on a carbamazepine monolayer forms unique 1D supramolecular assemblies

High-resolution STM imaging of the structures formed by carbamazepine molecules adsorbed onto a pseudo-ordered carbamazepine monolayer on Au(111) shows the formation of previously unreported 1-dimensional supramolecular assemblies.     

Purification and structure elucidation of three naturally bioactive molecules from the new terrestrial Streptomyces sp. TN17 strain

Thirty litres of fermentation broth was extracted from the newly isolated Streptomyces sp. strain TN17 and various separation and purification steps led to the isolation of three pure bioactive compounds (1-3). Compound 1: cyclo (L-Leu-L-Arg), a diketopiperazine 'DKP' derivative; 2: di-(2-ethylhexyl) phthalate, a phthalate derivative; and 3: cyclo 1-[2-(cyclopentanecarbonyl-3-phenyl-propionyl]-pyrrolidine-2-carboxylic acid (1-carbamoyl-propyl)-amide, a cyclic tetrapeptide derivative. The chemical structure of these three active compounds was established on the basis of spectroscopic studies (MS and NMR) and by comparison with data from the literature. According to our biological studies, the pure compounds (1-3) possess antibacterial and antifungal activities.     

Maximum likelihood estimation for noncausal autoregressive processes

We discuss a maximum likelihood procedure for estimating parameters in possibly noncausal autoregressive processes driven by i.i.d. non-Gaussian noise. Under appropriate conditions, estimates of the parameters that are solutions to the likelihood equations exist and are asymptotically normal. The estimation procedure is illustrated with a simulation study for AR(2) processes.     

Identification and separation of saxitoxins using hydrophilic interaction liquid chromatography coupled to traveling wave ion mobility‐mass spectrometry

The aim of this work was to develop a reliable and efficient analytical method to characterise and differentiate saxitoxin analogues (STX), including sulphated (gonyautoxins, GTX) and non‐sulphated analogues. For this purpose, hydrophilic interaction liquid chromatography (HILIC) was used to separate sulphated analogues. We also resorted to ion mobility spectrometry to differentiate the STX analogues because this technique adds a new dimension of separation based on ion gas phase conformation. Positive and negative ionisation modes were used for gonyautoxins while positive ionisation mode was used for non‐sulphated analogues. Subsequently, the coupling of these three complementary techniques, HILIC‐IM‐MS, permitted the separation and identification of STX analogues; isomer differentiation was achieved in HILIC dimension while non‐sulphated analogues were separated in the IM‐MS dimension. Additional structural characteristics concerning the conformation of STXs could be obtained using IM‐MS measurements. Thus, the collision cross sections (CCS) of STXs are reported for the first time in the positive ionisation mode. These experimental CCSs correlated well with the calculated CCS values using the trajectory method. Copyright © 2015 John Wiley & Sons, Ltd.     

On the Weak Invariance Principle for Non-Adapted Sequences under Projective Criteria

In this paper we study the central limit theorem and its weak invariance principle for sums of non-adapted stationary sequences, under different normalizations. Our conditions involve the conditional expectation of the variables with respect to a given σ-algebra, as done in Gordin (Dokl. Akad. Nauk SSSR 188, 739–741, 1969) and Heyde (Z. Wahrsch. verw. Gebiete 30, 315–320, 1974). These conditions are well adapted to a large variety of examples, including linear processes with dependent innovations or regular functions of linear processes.