Growth of Single-Walled Carbon Nanotubes with Controlled Structure: Floating Carbide Solid Catalysts

Single-walled carbon nanotube (SWNT) horizontal arrays with specific chirality can be enriched using solid carbide catalysts on substrates. However, scale-up production by continuous loading of the solid catalysts onto the substrates is challenging. Described here is the preparation of a floating carbide solid catalyst (FSC) for the controlled growth of SWNTs. The FSC, titanium carbide (TiC) nanoparticle, was directly obtained in the carrier gas phase by decomposition and carbonization of the titanocene dichloride precursor at high temperature. By using the TiC nanoparticle FSC, both SWNT horizontal arrays and randomly distributed networks can be obtained. The chirality of the as-grown SWNTs were thermodynamically controlled to have fourfold symmetry. Further optimization of growth condition resulted in an abundance of (16,8) tubes with about a 74 % content. This FSC chemical vapor deposition (FSCCVD) method has potential for realizing mass growth of SWNTs with controlled structures.     

Pressure-Suppressed Carrier Trapping Leads to Enhanced Emission in Two-Dimensional Perovskite (HA)2(GA)Pb2I7

A remarkable PL enhancement by 12 fold is achieved using pressure to modulate the structure of a recently developed 2D perovskite (HA)₂(GA)Pb₂I₇ (HA=n-hexylammonium, GA=guanidinium). This structure features a previously unattainable, extremely large cage. In situ structural, spectroscopic, and theoretical analyses reveal that lattice compression under a mild pressure within 1.6 GPa considerably suppresses the carrier trapping, leading to significantly enhanced emission. Further pressurization induces a non-luminescent amorphous yellow phase, which is retained and exhibits a continuously increasing band gap during decompression. When the pressure is released to 1.5 GPa, emission can be triggered by above-band gap laser irradiation, accompanied by a color change from yellow to orange. The obtained orange phase could be retained at ambient conditions and exhibits two-fold higher PL emission compared with the pristine (HA)₂(GA)Pb₂I₇.     

Dysprosiacarboranes as Organometallic Single-Molecule Magnets

The dicarbollide ion, nido-C₂B₉H₁₁²⁻ is isoelectronic with cyclopentadienyl. Herein, we make dysprosiacarboranes, namely [(C₂B₉H₁₁)₂Ln(THF)₂][Na(THF)₅] (Ln=Dy, 1Dy ) and [(THF)₃(μ-H)₃Li]₂[{η⁵-C₆H₄(CH₂)₂C₂B₉H₉}Dy{η²:η⁵-C₆H₄(CH₂)₂C₂B₉H₉}₂Li] 3Dy and show that dicarbollide ligands impose strong magnetic axiality on the central Dy^III ion. The effective energy barrier (U_eff) for the loss of magnetization can be varied by the substitution pattern on the dicarbollide. This finding is demonstrated by comparing complexes of nido-C₂B₉H₁₁²⁻ and nido-[o-xylylene-C₂B₉H₉]²⁻, which show a U_eff of 430(5) K and 804(7) K, respectively. The blocking temperature defined by the open hysteresis temperature of 3Dy reaches 6.8 K. Moreover, the linear complex [Dy(C₂B₉H₁₁)₂]⁻ is predicted to have comparable properties with the linear [Dy(Cp^Me3)₂]⁺ complex. As such, carboranyl ligands and their derivatives may provide a new type of organometallic ligand for high-performance single-molecule magnets.     

Machine-Driven Chemoenzymatic Synthesis of Glycopeptide

Historically, researchers have put considerable effort into developing automation systems to prepare natural biopolymers such as peptides and oligonucleotides. The availability of such mature systems has significantly advanced the development of natural science. Over the past twenty years, breakthroughs in automated synthesis of oligosaccharides have also been achieved. A machine-driven platform for glycopeptide synthesis by a reconstructed peptide synthesizer is described. The designed platform is based on the use of an amine-functionalized silica resin to facilitate the chemical synthesis of peptides in organic solvent as well as the enzymatic synthesis of glycan epitopes in the aqueous phase in a single reaction vessel. Both syntheses were performed by a peptide synthesizer in a semiautomated manner.     

Porous Tantalum Nitride Single Crystal at Two-Centimeter Scale with Enhanced Photoelectrochemical Performance

Porous tantalum nitride (Ta₃N₅) single crystals, combining structural coherence and porous microstructure, would substantially improve the photoelectrochemical performance. The structural coherence would reduce the recombination of charge carriers and maintain excellent transport properties while the porous microstructure would not only reduce photon scattering but also facilitate surface reactions. Here, we grow bulk-porous Ta₃N₅ single crystals on a two-centimeter scale with (002), (023), and (041) facets, respectively, and show significantly enhanced photoelectrochemical performance. We show the preferential facet growth of porous crystals in a lattice reconstruction strategy in relation to lattice match and lattice channel. We present the facet engineering to enhance light absorption, exciton lifetime and transport properties. The porous Ta₃N₅ single crystal boosts photoelectrochemical oxidation of alcohols with the (002) facet showing the highest performance of >99 % alcohol conversion and >99 % aldehyde/ketone selectivity.     

Electrochemical Phase Evolution of Metal-Based Pre-Catalysts for High-Rate Polysulfide Conversion

In situ evolution of electrocatalysts is of paramount importance in defining catalytic reactions. Catalysts for aprotic electrochemistry such as lithium–sulfur (Li-S) batteries are the cornerstone to enhance intrinsically sluggish reaction kinetics but the true active phases are often controversial. Herein, we reveal the electrochemical phase evolution of metal-based pre-catalysts (Co₄N) in working Li-S batteries that renders highly active electrocatalysts (CoS_x). Electrochemical cycling induces the transformation from single-crystalline Co₄N to polycrystalline CoS_x that are rich in active sites. This transformation propels all-phase polysulfide-involving reactions. Consequently, Co₄N enables stable operation of high-rate (10 C, 16.7 mA cm⁻²) and electrolyte-starved (4.7 μL mg_S⁻¹) Li-S batteries. The general concept of electrochemically induced sulfurization is verified by thermodynamic energetics for most of low-valence metal compounds.     

DMSO-Enabled Selective Radical O−H Activation of 1,3(4)-Diols

Control of selectivity is one of the central topics in organic chemistry. Although unprecedented alkoxyl-radical-induced transformations have drawn a lot of attention, compared to selective C−H activation, selective radical O−H activation remains less explored. Herein, we report a novel selective radical O−H activation strategy of diols by combining spatial effects with proton-coupled electron transfer (PCET). It was found that DMSO is an essential reagent that enables the regioselective transformation of diols. Mechanistic studies indicated the existence of the alkoxyl radical and the selective interaction between DMSO and hydroxyl groups. Moreover, the distal C−C cleavage was realized by this selective alkoxyl-radical-initiation protocol.     

Rational Design of Cyclometalated Iridium(III) Complexes for Three-Photon Phosphorescence Bioimaging

Compared to 2PE (two-photon excitation) microscopy, 3PE microscopy has superior spatial resolution, deeper tissue penetration, and less defocused interference. The design of suitable agents with a large Stokes shift, good three-photon absorption (3PA), subcellular targeting, and fluorescence lifetime imaging (FLIM) properties, is challenging. Now, two Ir^III complexes (3PAIr1 and 3PAIr2) were developed as efficient three-photon phosphorescence (3PP) agents. Calculations reveal that the introduction of a new group to the molecular scaffold confers a quadruple promotion in three-photon transition probability. Confocal and lifetime imaging of mitochondria using Ir^III complexes as 3PP agents is shown. The complexes exhibit low working concentration (50 nm ), fast uptake (5 min), and low threshold for three-photon excitation power (0.5 mW at 980 nm). The impressive tissue penetration depth (ca. 450 μm) allowed the 3D imaging and reconstruction of brain vasculature from a living specimen.     

An Endo-Selective Epoxide-Opening Cascade for the Fast Assembly of the Polycyclic Core Structure of Marine Ladder Polyethers

The rapid synthesis of marine ladder polyethers from polyepoxide precursors (in analogy with the biosynthetic pathway hypothesized by Nakanishi) is hampered by the fact that the exo-selective epoxide-opening cyclization cascade that gives THF-type polyethers is preferred over the endo-selective cascade that gives the desired products. We found that perfluoro-tert-butanol (PFTB) cooperating with 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM]BF₄) can promote endo-selective epoxide-opening cyclization reactions of trisubstituted epoxy alcohols. Starting from readily accessible homochiral polyepoxy alcohols with a methyl group at all the endo-cyclization sites, we were able to construct polyethers up to five consecutive fused 6-, 7-, and/or 8-membered rings in one step. Notably, molecules with the 7/7/6/6 and 7/7/6/7/6 polyether frameworks of hemibrevetoxin B and brevenal, respectively, could be synthesized in 40 % and 17 % chemical yields.     

J-Aggregate-Based FRET Monitoring of Drug Release from Polymer Nanoparticles with High Drug Loading

Understanding drug-release kinetics is critical for the development of drug-loaded nanoparticles. We developed a J-aggregate-based Förster-resonance energy-transfer (FRET) method to investigate the release of novel high-drug-loading (50 wt %) nanoparticles in comparison with low-drug-loading (0.5 wt %) nanoparticles. Single-dye-loaded nanoparticles form J-aggregates because of the high dye-loading (50 wt %), resulting in a large red-shift (≈110 nm) in the fluorescence spectrum. Dual-dye-loaded nanoparticles with high dye-loading using FRET pairs exhibited not only FRET but also a J-aggregate red-shift (116 nm). Using this J-aggregate-based FRET method, dye-core–polymer-shell nanoparticles showed two release processes intracellularly: the dissolution of the dye aggregates into dye molecules and the release of the dye molecules from the polymer shell. Also, the high-dye-loading nanoparticles (50 wt %) exhibited a slow release kinetics in serum and relatively quick release in cells, demonstrating their great potential in drug delivery.