以一种新型Gemini表面活性剂作为介孔模板剂通过转晶过程合成介孔ZSM-5分子筛

将一种新型Gemini表面活性剂,丙撑基双(十八烷基二甲基氯化铵)[C18H37(CH3)2–N+–(CH2)3–N+–(CH3)2C18H37]Cl2(C18-3-18),作为介孔模板剂用于水热法合成介孔ZSM-5分子筛.结果表明,在130 oC低温晶化即可高效合成介孔ZSM-5分子刷.C18-3-18的加入量可影响到所合成介孔ZSM-5分子筛的相对结晶度和织构性质,它的形成遵从一个转晶过程.在合成初期,凝胶中介孔模板剂C18-3-18的使用导向了介孔材料的生成;随后在TPABr的模板作用下,介孔材料慢慢转晶生成具有MFI结构的介孔ZSM-5;然后所合成的介孔ZSM-5晶粒进一步长大并聚集形成块状颗粒,同时产生晶间介孔.C18-3-18作为介孔导向剂不仅可用于合成介孔ZSM-5分子筛,也可用于其它介孔分子筛的合成中.     

Opening Band Gap of Graphene by Chemical Doping: a First Principles Study

Single atom chemically doped graphene has been theoretically studied by density functional theory. The largest band gap, 0.62 eV, appears in arsenic atom doped graphene, then 0.60 eV comes by the tin atom, whose deformations can neither be ignored. It is also found that oxygen and iron single atom embedded graphene can open band gap by 0.52 and 0.54 eV, respectively. Moreover, doping O atom shows little distortion and high stability by charge redistribution. The band gap of Fe doped graphene is opened by orbital hybridization. The other heteroatom doped results are a little inferior to them.     

Ethylene polymerization with novel phenoxy-imine catalysts bearing 4-vinylphenyl group

This contribution reports ethylene polymerization behavior of titanium complexes incorporating bis(phenoxyimine) ligands. Six phenoxy-imine Ti(IV) complexes {6-R1-2-[CH=N(2,6-difluoro-3,5-diR2-4-R3Ph)]C6H3O}2TiCl2(1: R1 = H, R2 = H, R3 = H; 2: R1 = H, R2 = H, R3 = 4-vinylphenyl; 3: R1 = CH3, R2 = H, R3 = H; 4: R1 = CH3, R2 = H, R3 = 4-vinylphenyl; 5: R1 = CH3, R2 = F, R3 = H; 6: R1 = CH3, R2 = F, R3 = 4-vinylphenyl) have been synthesized and evaluated for ethylene polymerization using dried MAO(simplified as DMAO) as cocatalyst. An obvious catalytic heterogeneity of Cat 2(Complex 2/DMAO) towards ethylene polymerization was observed, which was illustrated by decreased activity, multimodal molecular weight distribution and partially improved particle morphology comparing with Cat 1. Moreover, Cat 3 exhibits "living" characteristics in the process under certain conditions(25 °C, less than 20 min). Otherwise, the moderate to high ethylene polymerization activity of ca. 105-106 g PE/(mol Ti·h) and high molecular weight(Mw = 105-106) of polyethylene can be obtained by changing the skeleton structure of these complexes.     

Influence of different inorganic salts on crystallization-driven morphological transformation of PCL-b-PEO micelles in aqueous solutions

Different inorganic salts, including NaSCN, NaCl, MgCl2 and Na2SO4, were added into the aqueous solution containing poly(ε-caprolactone)-b-poly(ethylene oxide)(PCL-b-PEO) semicrystalline micelles. The effects of inorganic salt on the micellar size and morphology were investigated with TEM and DLS. It is found that addition of NaSCN leads to increase of the micellar size, but the micelles remain to be spherical. By contrast, the other three inorganic salts can induce sphere-to-cylinder or sphere-to-lamella transformations of the PCL-b-PEO semicrystalline micelles. The alteration rate of the micellar size with the time after addition of the inorganic salts decreases in the following order: Na2SO4 NaCl ≈ MgCl2 NaSCN. These results were interpreted in terms of the "salting-out" ability of the cations and anions. The anions SO42- and Cl- have a stronger "salting-out" ability, driving the morphological transformations of the micelles and leading to a rapid change in micellar size. By contrast, SCN- has a weaker salting-out" ability. The cations Na+ and Mg2+ may associate with the PEO blocks, leading to a "salting-out" effect as well. However, the "salting-out" ability of cations is weaker than that of SO42- and Cl- anions, and the "salting-out" abilities of Na+ and Mg2+ are similar.     

Microstructure characterization of short-chain branching polyethylene with differential scanning calorimetry and successive selfnucleation/annealing thermal fractionation

A series of the copolymers of ethylene with 1-hexene(M1–M9) synthesized by metallocene catalyst Et[Ind]2ZrCl2/MAO was studied by differential scanning calorimetry and successive self-nucleation and annealing(SSA) thermal fractionation. The distribution of methylene sequence length(MSL) in the different copolymers was determined using the SSA method. The comonomer contents of samples M4 and M5 are 2.04 mol% and 2.78 mol%, respectively. Both M4 and M5 have low comonomer content and their MSL distribution profiles exhibit a monotonous increase trend with their MSL. The longest MSL of M5 is 167, and its corresponding molar percent is 43.95%, which is higher than that of M4. Moreover, the melting temperature(Tm) of M5 is also higher than that of M4. The comonomer contents of samples M7, M8, and M9 are 8.73 mol%, 14.18 mol% and 15.05 mol%, respectively. M7, M8, and M9 have high comonomer contents, and their MSL distribution profiles display unimodality. M7 has a lower peak value of 33 and a narrow MSL distribution, resulting in a Tm lower than that of M8 and M9. The MSL and its distribution are also key points that influence the melting behavior of copolymers. Sometimes, MSL and its distribution of copolymers have a greater impact on it than the total comonomer contents, which is different from traditional views.     

Conductive Cotton Prepared by Polyaniline In Situ Polymerization Using Laccase

The high-redox-potential catalyst laccase, isolated from Aspergillus, was first used as a biocatalyst in the oxidative polymerization of water-soluble conductive polyaniline, and then conductive cotton was prepared by in situ polymerization under the same conditions. The polymerization of aniline was performed in a water dispersion of sodium dodecylbenzenesulfonate (SDBS) micellar solution with atmospheric oxygen serving as the oxidizing agent. This method is ecologically clean and permits a greater degree of control over the kinetics of the reaction. The conditions for polyaniline synthesis were optimized. Characterizations of the conducting polyaniline and cotton were carried out using Fourier transform infrared spectroscopy, UV–vis spectroscopy, cyclic voltammetry, the fabric induction electrostatic tester, and the far-field EMC shielding effectiveness test fixture.     

双核铜配合物Cu2(2,2′-bpy)2(2-bba)4的合成、表征与晶体结构

在室温下,以2-溴苯甲酸和2,2'-联吡啶为配体,通过溶液法在甲醇/水的混合溶剂中反应合成了双核铜(II)配合物Cu2(2,2'-bpy)2(2-bba)4。通过元素分析、红外光谱、热重测试技术和X射线粉末衍射对其进行了结构表征,同时用X射线单晶衍射分析确定了其晶体结构。结果表明,其晶体属正交晶系,空间群为Pbca,晶胞参数:a=20.619(4),b=10.098(2),c=21.865(4),V=4552.5(15)3,Dc=1.808g·cm-3,μ=4.505mm-1,F(000)=2440.0,Z=4,最终残差因子R1=0.0583,wR2=0.1200。配合物为双核结构,每个结构单元中2个Cu(II)离子通过2个2-溴苯甲酸根配体单齿桥联。配合物中的每个Cu(II)离子为五配位的结构,分别和来自2个单齿桥联的2-溴苯甲酸根的2个氧原子、1个单齿配位的2-溴苯甲酸根的1个氧原子及来自1个2,2'-联吡啶的2个氮原子配位形成了畸变的四方锥型结构,分子间则通过弱的C—H…O氢键作用形成了一维链状的结构。CCDC:972827。     

Preparation of raspberry-like silica microcapsules via sulfonated polystyrene template and aniline medium assembly method

Raspberry-like composite particles and microcapsules were prepared with anionic sulfonated polystyrene (PSS) particles as templates and cationic aniline monomer as assembly medium. With the help of the sulfonated microgel shells, aniline and silica particles could not only adsorbed onto template surfaces but also go inward shells and finally form microcapsules with varied silica shell thickness. The sulfonation extent of PSS particles first climbed up and then decreased with sulfonation time due to the competition of sulfonation reaction and PSS chain detachment. The silica content in composite particles and shell thickness of microcapsules followed similar trend with sulfonation extent. The choice of aniline as assembly medium was checked by comparing with methyl methacrylate and [2-(methacryloyloxy) ethyl] trimethylammonium chloride, and it was found that the cationic and water-insoluble properties of aniline are both important for the composite efficiency.     

真空离心浓缩/气相色谱-质谱联用法测定白酒中6种邻苯二甲酸酯类增塑剂

建立了测定白酒中6种邻苯二甲酸酯类增塑剂的真空离心浓缩/气相色谱-质谱联用(GC-MS)分析方法。样品经真空离心浓缩,正己烷提取,取上层正己烷,4000r/min离心5min,采用GC-MS测定,外标法定量。在0.10～5.00μg/mL范围内,相关系数r20.992,样品在0.10～2.00 mg/kg范围内加标,平均回收率在88.83%～111.67%之间,相对标准偏差(RSD)为4.85%～11.35%,检出限(LOD)在0.02～0.05 mg/kg之间。采用该方法对16个白酒样品进行测定,结果表明该法简便、快速、结果准确可靠、灵敏度高,能够满足白酒中6种邻苯二甲酸酯增塑剂检测需求。     

Synthesis of biodiesel over ZnO/Ca(OH)2/KF catalyst prepared by the grinding method

A novel ZnO/Ca(OH)₂/KF solid base catalyst was prepared by the grinding method and applied to biodiesel synthesis by the transesterification of soybean oil. The effect of various parameters such as KF molar amount, calcination temperature, the amount of catalyst, molar ratio of methanol to oil, reaction temperature, and time on the activity of the catalyst were investigated. The catalysts were characterized by several techniques of thermogravimetry/derivative thermogravimetry, X–ray diffraction, Hammett indicator method, and scanning electron microscopy. The analysis results indicated that the KF interacted with Ca(OH)₂ and formed KCaF₃ phase before calcination of the catalyst. The formed KCaF₃ crystal phase was the main catalytic active component for the catalyst activity. In addition, the basicity of ZnO/Ca(OH)₂/KF was greatly influenced by the different calcination temperates, and the catalyst activity was correlated closely with the basicity. A desired biodiesel yield of 97.6 % was obtained at catalyst amount of 3 %, methanol/oil of 12:1, and reaction time of 1.5 h at 65 °C.