Effect of the thickness of InGaN interlayer on a-plane GaN epilayer

In this paper,we use the a-plane InGaN interlayer to improve the property of a-plane GaN.Based on the a-InGaN interlayer,a template exhibits that a regular,porous structure,which acts as a compliant effect,can be obtained to release the strain caused by the lattice and thermal mismatch between a-GaN and r-sapphire.We find that the thickness of InGaN has a great influence on the growth of a-GaN.The surface morphology and crystalline quality both are first improved and then deteriorated with increasing the thickness of the InGaN interlayer.When the InGaN thickness exceeds a critical point,the a-GaN epilayer peels off in the process of cooling down to room temperature.This is an attractive way of lifting off a-GaN films from the sapphire substrate.     

The preparation of nickel oxide based on infinite dilute method and its electrochemical performance

With NaOH as precipitation agent and NiSO₄ · 6H₂O as raw material, Ni(OH)₂ particles were synthesized by infinite dilute method and sintered at 300°C for NiO. The synthesized NiO particles with a structure of cubic crystalline phase are well dispersed and ball-flower like with a diameter of 500 nm. The electrochemical tests show that the NiO particles have relatively high capacitance and excellent capacitive retention. The good structure and excellent performance suggest its promising application in supercapacitors.     

Preparation of Polyaniline/Au0 Nanocomposites Modified Electrode and Application for Hydrazine Detection

The PANI/Au₀ nanocomposite films were successfully prepared on glassy carbon electrode (GCE) using a simple alternate adsorption of water soluble polyaniline (PANI) and . The growth of the films was monitored by UV? Vis spectroscopy and cyclic voltammetry. was in‐situ reduced in the film due to the redox interaction between PANI and , without extra reductant. The ultrafine Au nanoparticles with the size of 2–4 nm were observed by transmission electron spectroscopy. The existence of zero‐valence Au nanocrystals (Au₀) was confirmed by X‐ray photoelectron spectroscopy, X‐ray Diffraction and FTIR. PANI in the nano‐structured PANI/Au₀ composite films displayed a good redox activity in neutral pH solution. The as‐obtained PANI/Au₀/GCE presents an excellent electrocatalytic activity to hydrazine oxidation, and the mechanism of hydrazine oxidation was studied. The calibration curve on (PANI/Au₀)₅/GCE was obtained in the concentration range of 0.01–6 mM with the detection limit of 1 µM (S/N>3). The modified electrode has a great potential for hydrazine sensor application due to its ease of fabrication, good reproducibility and high stability.     

Syntheses and Crystal Structures of Two New Pentaborates Templated by Transition-Metal Complexes

Two new pentaborates [M(dap)₃][B₅O₆(OH)₄]₂·H₂O (M = Co (1) and Ni (2); dap = 1,2-diaminopropane) have been hydrothermally synthesized. Both structures were determined by single crystal X-ray diffraction and further characterized by elemental analysis, FT-IR, thermogravimetric analysis and photoluminescence spectroscopy. Two compounds are isostructural and consist of isolated pentaborate [B₅O₆(OH)₄]^? anions and [M(dap)₃]²⁺ complex cations. The anionic [B₅O₆(OH)₄]^? groups are linked by extensive hydrogen bonds to form a 3-D supramolecular framework with large channels, in which the transition-metal complex templates are located. The luminescent properties of 1 and 2 were studied, and blue luminescence occurs with an emission maximum at 405 and 408 nm upon excitation at 332 and 328 nm respectively. Crystal data: 1, monoclinic, space group P2₁/c (No. 14), a = 9.7159(5) Å, b = 29.3372(19) Å, c = 11.5121(6) Å, β = 103.286(5)°, V = 3193.6(3) ų, Z = 4; 2, monoclinic, space group P2₁/c, a = 9.7264(4) Å, b = 29.3810(16) Å, c = 11.5185(6) Å, β = 103.249(4)°, V = 3204.0(3) ų, Z = 4.     

Synthesis,Structural Characterization and Properties of Two Strontium Borates Constructed from Oxo Boron Clusters

Two strontium borates Sr₂[B₆O₉(OH)₄] (1) and Sr₂B₅O₉(OH)·H₂O (2), with acentric structures have been synthesized under hydro/solvothermal conditions. Compound 1 is reported for the first time in the strontium borates system, and it crystallizes in the monoclinic space group P2₁ with unit cell parameters a = 6.8445(5) Å, b = 8.7033(6) Å, c = 8.4632(6) Å, β = 100.581(6)°, V = 495.58(6) ų and Z = 2. Its structure consists of unusual borate layers of 3, 11-membered rings, which are interconnected via Sr–O ionic bonds and hydrogen bonds to generate a 3D supramolecular network. Compound 2 is a known strontium borate, crystallizing in the monoclinic space group C ₂ with a = 10.161 (13) Å, b = 7.965(4) Å, c = 6.393(11) Å, β = 128.0(2)°, V = 407.7(14) ų and Z = 2. Second-harmonic generation measurements on the powder samples reveal that 1 and 2 exhibits good SHG efficiency about 1.5 and 2 times that of KDP (KH₂PO₄) powder respectively.     

Design and synthesis of pyromellitic diimide‐based donor–acceptor conjugated polymers for photovoltaic application

Three of conjugated polymers based on pyromellitic diimide (PMDI) as the acceptor unit and thienothiophene (TT) as the donor unit were successfully synthesized by Stille coupling. The effect of the side chain length and thiophene π‐bridge on the polymers' optical and electrochemical properties was investigated. Electrochemical characterization indicated that these polymers have deep highest occupied molecular orbital energy levels between ?5.7 and ?5.8 eV. Polymer solar cells were fabricated by using these PMDI‐based polymers as the donor and [6,6]‐phenyl‐C61‐butyric acid methyl ester as the acceptor. The polymer P1 whose PMDI unit was functionalized with 2‐ethylhexyl side chain shows the higher short‐circuit current (J_sc) and fill factor (FF) compared with that of P2 with a 2‐octyldodecyl side chain on the PMDI unit. The results also illustrate that the insertion of a thiophene π‐bridge between PMDI and TT (the polymer P3) leads to the broader absorption and better photovoltaic performance. The best performance was obtained from the cell based on the polymer P3 with a power conversion efficiency of 0.43% under the illumination of AM 1.5 G, 100 mW/cm². Copyright © 2014 John Wiley & Sons, Ltd.     

Microcalorimetric investigation on antibacterial activity of the peptide from Plutella xylostella

The antibacterial activities of a kind of novel peptide from Plutella xylostella (pxCECA1) on methicillin-resistant staphylococcus aureus (MRSA) and Escherichia coli (E. coli) growth were investigated by microcalorimetry. The heat flow power–time curves of MRSA and E. coli growth in the presence of pxCECA1 were recorded using the 3114/3115 Thermal Activity Monitor Air Isothermal Calorimeter based on ampoule mode at 37 °C. Some parameters including growth rate constant k, maximum power output P _max, total heat output Q_t, generation time t _g, growth inhibitory ratio I, and half-inhibitory concentration of the drugs IC₅₀ were obtained to elucidate the antibacterial activity of pxCECA1. The results showed that k, P _max, and Q _t decreased, but I and t _g increased or delayed with the increase in pxCECA1 concentration. The IC₅₀ of pxCECA1 on E. coli was 6.122 μg mL^?1 and MRSA was 7.809 μg mL^?1. It could be concluded that pxCECA1 had stronger inhibitory effect on E. coli than MRSA. In vivo test was simultaneously performed using an E. coli and MRSA infection model to validate the antibacterial activity of pxCECA1. The results revealed that pxCECA1 with broad spectrum antimicrobial activities hopefully represented a class of promising substitute of antimicrobial agents.     

Electrospinning synthesis and photocatalytic property of CaFe2O4/MgFe2O4 heterostructure for degradation of tetracycline

CaFe₂O₄/MgFe₂O₄ nanowires with heterostructure had been successfully synthesized by electrospinning method. The obtained samples were systematically characterized by scanning electron microscopy (SEM), X‐Ray diffraction (XRD), UV–Vis diffuse reflectance spectra (UV‐Vis DR) and Environment scanning electron microscopy (ESEM). The novel CaFe₂O₄/MgFe₂O₄ nanowires exhibit an enhanced photocatalytic activity for degrading of tetracycline (TC) under visible light. Compared with bare CaFe₂O₄ or MgFe₂O₄ samples, the prepared CaFe₂O₄/MgFe₂O₄ (Ca:Mg:Fe = 3:2:10) composited nanowires show the best photocatalytic performance with a degradation efficiency of 40% after 150 min reaction time. This enhancement is attributed to the heterostructure of CaFe₂O₄/MgFe₂O₄ nanowires, which effectively repress the recombination of photo‐generated electrons and holes. Based on heterostructure and energy band positions, the enhancement of mechanism under visible‐light enhances the photocatalytic activity.     

Comparative curing kinetics of 1,4-bis (4-diaminobenzene-1-oxygen) n-butane and 4,4′-bis-(diaminodiphenyl) methane with tetraglycidyl methylene dianiline systems

Aromatic amine curing agent with flexible unit in backbone, 1,4-bis (4-diaminobenzene-1-oxygen) n-butane (DDBE), was synthesized, and the structure was confirmed by FT-IR and ¹H NMR. The curing kinetics of tetraglycidyl methylene dianiline (TGDDM, or AG80) using DDBE and 4,4′-bis-(diaminodiphenyl) methane (DDM) as curing agents, respectively, were comparatively studied by non-isothermal DSC with a model-fitting Málek approach and a model-free advanced isoconversional method of Vyazovkin. The dynamic mechanical properties and thermal stabilities of the cured materials were investigated by DMTA and TG, respectively. The results showed that the activation energy of AG80/DDBE system was slightly higher than that of AG80/DDM system. ?esták-Berggren model can generally simulate well the reaction rates of these two systems. DMTA measurements showed that the storage modulus of cured AG80/DDBE is similar to that of cured AG80/DDM at the temperature below glass transition temperature (T _g) and lower than that of cured AG80/DDM at the temperature above glass transition temperature, while T _g of cured AG80/DDBE is lower than that of cured AG80/DDM. TG showed that the thermal stabilities of these two cured systems are similar.     

Pyrolysis of Hailar lignite in an autogenerated steam agent

An in situ pyrolysis process of high moisture content lignite in an autogenerated steam agent was proposed. The aim is to utilize steam autogenerated from lignite moisture as a reactant to produce fuel gas and additional hydrogen. Thermogravimetric analysis revealed that mass loss and maximum mass loss rate increased with the rise of heating rates. The in situ pyrolysis process was performed in a screw kiln reactor to investigate the effects of moisture content and reactor temperature on product yields, gas compositions, and pyrolysis performance. The results demonstrated that inherent moisture in lignite had a significant influence on the product yield. The pyrolysis of L _R (raw lignite with a moisture content of 36.9 %, wet basis) at 900 °C exhibited higher dry yield of 33.67 mL g^?1 and H₂ content of 50.3 vol% than those from the pyrolysis of the predried lignite. It was also shown that increasing reaction temperature led to a rising dry gas yield and H₂ yield. The pyrolysis of L _R showed the maximum dry yield of 33.7 mL g^?1 and H₂ content of 53.2 vol% at 1,000 °C. The LHV of fuel gas ranged from 18.45 to 14.38 MJ Nm^?3 when the reactor temperature increased from 600 to 1,000 °C.