铽－甲基吲哚乙酰丙酮三元配合物发光过程研究

测定和分析了ＲＥ．Ｌ１．Ｌ２（ＲＥ＝Ｔｂ（Ⅲ）、Ｇｄ（Ⅲ），Ｌ１＝３Ｍ（３甲基吲哚－１－乙酰基丙酮），Ｌ２＝ＴＰＰＯ、Ｐｈｅｎ、Ｄｉｐｙ）三元配合物的荧光光谱、磷光光谱、磷光寿命及变温荧光光谱等．讨论了Ｔｂ（Ⅲ）与配体之间的能级匹配和Ｌ１与Ｌ２的三重态之间传能的问题，说明了影响这些三元配合物荧光效率的主要因素及其发光过程．     

The honeycomb network structure of poly[[[μ2‐1,3‐bis(1H‐benzimidazol‐2‐yl)benzene‐κ2N3:N3′](μ2‐terephthalato‐κ2O:O′)zinc(II)] ethanol solvate]

The terephthalate dianion and the bis(imidazolyl)benzene ligand of the title compound, {[Zn(C₈H₄O₄)(C₂₀H₁₄N₄)]·C₂H₆O}_n, each bridges two adjacent zinc centers, resulting in a layer‐type coordination polymer; the zinc center shows tetrahedral coordination. The disordered ethanol solvent molecules occupy the spaces between the layers and are hydrogen bonded to the layers. The two symmetry‐independent dianions lie on different inversion sites.     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

早期火灾图像监测技术的应用与比较

本文对可提供图像信息的火灾物理现象进行了具体分析，讨论了利用摄像技术进行早期火灾探测的可能性、使用条件以及图像监测技术在火灾探测中的地位和作用，进行了若干种图像监测技术的对比实验，得出了相应的结论。     

Dimensionally and thermally stable polymer,containing disordered graphitic structure and adamantane

In an attempt to develop a low‐k interlayer dielectric, adamantane‐diphenyldiethynyl moiety containing oligomer is prepared. Oligomerization of 1,3,5,7‐tetrakis[3/4‐ethynylphenyl]adamantane ( 4 ) is accomplished by a Glaser–Hay oxidative coupling with 1,3,5‐triethynylbenzene and phenylacetylene end‐capping agent. The CHCl₃ soluble oligomer is then thermally treated by step‐curing at 200, 300, 380, and 450 °C for 30 min at each temperature under nitrogen flow to render a shiny void‐free black polymer. TGA analysis indicates that the polymer is stable under nitrogen up to 500 °C with a marginal decomposition up to 800 °C. Solid‐state ¹³C NMR, Raman scattering, and FTIR are used to characterize the structure of the polymer. The polymer consists of amorphous carbon networks with the adamantane moieties and nanosized graphitic regions (clusters), which are generated from the thermal crosslinking of the diphenyldiethynyl units. It shows a remarkably low linear coefficient of thermal expansion (～25 ppm/°C), presumably due to the presence of the disordered graphitic structure. Its high density (～1.21 g/cm³), refractive index (～1.80 at 632 nm), and Young's modulus (～17.0 GPa) are also consistent with the interpretation. This study reveals important details about the effect of microscopic structure on the macroscopic properties of the highly crosslinked polymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6909–6925, 2006     

D→Klv～l衰变过程的研究

用光锥QCD求和规则研究D→Klv～_l衰变过程，首先计算D→K跃迁形状因子，通过构造新的关联函数，消除了twist-3波函数的不确定性给计算结果所带来的影响，从而使计算结果更加精确. 计算得到的分支比与最近的实验数据相一致. 关键词： QCD光锥求和规则 D介子半轻衰变 分支比 形状因子     

动态广义球对称含荷黑洞的统计熵

利用改进了的brickwall膜模型,计算了动态广义球对称含荷黑洞的熵,研究结果表明,对于动态黑洞,将黑洞熵表示为与视界面积成正比时,则比例系数总与动态黑洞的视界速度有关 关键词： 广义球对称黑洞 黑洞熵 brick-wall膜模型 WKB近似     

基于单端半导体光放大器的可调谐超短光脉冲源理论与实验研究

超短光脉冲源是光时分复用(OTDM)系统中的关键器件.提出了一种基于单端半导体光放大器(SOA)的注入型主动锁模光纤激光器产生超短光脉冲的方案，建立了该方案的理论模型.实验实现了高消光比稳定的重复频率10—40GHz皮秒级光脉冲的输出，输出波长在30nm范围内连续可调. 关键词： 超短光脉冲 单端半导体光放大器 主动锁模     

Synthesis and characterization of poly(arylene ether)s containing 6‐(4‐hydroxyphenyl)pyridazin‐3(2H)‐one or 6‐(4‐hydroxyphenyl)pyridazine moieties

A series of novel soluble pyridazinone‐ or pyridazine‐containing poly(arylene ether)s were prepared by a polycondensation reaction. The pyridazinone monomer, 6‐(4‐hydroxyphenyl)pyridazin‐3(2H)‐one ( 1 ), was synthesized from the corresponding acetophenone and glyoxylic acid in a simple one‐pot reaction. The pyridazinone monomer was successfully copolymerized with bisphenol A (BPA) or 1,2‐dihydro‐4‐(4‐hydroxyphenyl)phthalazin‐1(2H)‐one (DHPZ) and bis(4‐fluorophenyl)sulfone to form high‐molecular‐weight polymers. The copolymers had inherent viscosities of 0.5–0.9 dL/g. The glass‐transition temperatures (T_g's) of the copolymers synthesized with BPA increased with increasing content of the pyridazinone monomer. The T_g's of the copolymers synthesized from DHPZ with different pyridazinone contents were similar to those of the two homopolymers. The homopolymers showed T_g's from 202 to 291 °C by differential scanning calorimetry. The 5% weight loss temperatures in nitrogen measured by thermogravimetric analysis were in the range of 411–500 °C. 4‐(6‐Chloropyridazin‐3‐yl)phenol ( 2 ) was synthesized from 1 via a simple one‐pot reaction. 2 was copolymerized with 4,4′‐isopropylidenediphenol and bis(4‐fluorophenyl)sulfone to form high‐T_g polymers. The copolymers with less than 80 mol % pyridazinone or chloropyridazine monomers were soluble in chlorinated solvents such as chloroform. The copolymers with higher pyridazinone contents and homopolymers were not soluble in chlorinated solvents but were still soluble in dipolar aprotic solvents such as N‐methylpyrrolidinone. The soluble polymers could be cast into flexible films from solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3328–3335, 2006