微波辅助RGD环肽的固相合成

以2-氯代三苯甲基氯树脂为载体，采用Fmoc/t-Bu/Dmab正交保护策略，在微波辅助下合成了环肽c(fKRGD)，收率22.5%，纯度94.5%，其结构经MS(ESI), MS(MALDI-TOF)和HPLC确证。     

SrTi0.9M0.1O3-δ钙钛矿型氧化物催化剂甲烷氧化偶联反应性能的研究

The structure and catalytic properties of SrTi_0.9M_0.1O_3-δ (M=Mg，Al， Zr) perovskite-type catalysts for ox-idative coupling of methane (OCM) have been studied by using X-ray diffraction (XRD)，X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption of oxygen(O₂-TPD) methods. It has been shown that doping the cations of lower valence (e.g. Mg²⁺， Al³⁺) to the B site of SrTi_0.9M_0.1O_3-δ perovskite-type catalysts results in the higher content of adsorbed oxygen species on the surface of catalysts and thus higher C₂-selectivity for OCM reaction. It is suggested that the oxygen vacancies of SrTi_0.9M_0.1O_3-δ (M=Mg， Al， Zr) perovskite-type catalysts are the sites responsible for oxygen activation， and the adsorbed oxygen species on the surface of SrTi_0.9M_0.1O_3-δ catalysts are the main active species for OCM reaction.     

Electrochemical Impedance Analysis of Thermogalvanic Cells

Thermogalvanic cells(also known as thermo-electrochemical cells) that convert waste heat energy to electricity are a new type of energy conversion device. However, the electron transfer kinetics and mass transfer of redox couples have not been thoroughly studied. Here, the ion reaction and charge transport in thermogalvanic cells are investigated by electrochemical impedance analysis. We first propose the detailed impedance model followed experimental verification on three types of electrode materials. Parameters including kinetic rate constants and ion diffusion coefficients for the electrodes are obtained by fitting the impedance data. Our study shows explicitly that impedance analysis can provide useful information on selecting suitable electrode materials for thermogalvanic cells.     

2,2-二羟甲基-1,3-丙二醇在275-510 K间的热容和相变

许多多元醇在270-500K间具有相变焓很大的固-固相变,是一类潜在的固-固相变低温储能物质。2,2-二羟甲基-1,3-丙二醇是一种重要的多元醇,除在化工方面有广泛的应用外,在低温储能方面也有相当乐观的开发前景。它的有关热性质虽已有一些DSC研究报道,但数据精度较差并缺乏系统性。作为系统研究多元醇及其固体溶液热力学性质工作的一部份,本文将报道2,2-二羟甲基-1,3-丙二醇在275—500K间的热容和相变,并根据所测其固-固相变焓数据讨论该物质被破坏的平均氢键键能。     

Liquefaction of corn stover and preparation of polyester from the liquefied polyol

This research investigated a novel process to prepare polyester from corn stover through liquefaction and crosslinking processes. First, corn stover was liquefied in organic solvents (90 wt% ethylene glycol and 10 wt% ethylene carbonate) with catalysts at moderate temperature under atmospheric pressure. The effect of liquefaction temperature, biomass content, and type of catalyst, such H₂SO₄, HCl, H₃PO₄, and ZnCl₂, was evaluated. Higher liquefaction yield was achieved in 2 wt% sulfuric acid, 1/4 (w/w) stover to liquefying reagent ratio; 160°C temperature, in 2h. The liquefied corn stover was rich in polyols, which can be directly used as feedstock for making polymers without further separation or purification. Second, polyester was made from the liquefied corn stover by crosslinking with multifunctional carboxylic acids and/or cyclic acid anhydrides. The tensile strength of polyester is about 5 MPa and the elongation is around 35%. The polyester is stable in cold water and organic solvents and readily biodegradable as indicated by 82% weight loss when buried in damp soil for 10 mo. The results indicate that this novel polyester could be used for the biodegradable garden mulch film production.     

Synthesis and X-ray crystal structure of oxamido-bridged heterobinuclear Ni(Ⅱ)-Cu(Ⅱ) complexes

The two complexes [Ni(oxen)Cu(L)2](ClO4)2.xH2O (L=2,2'-bipyridyl(bpy), 1,10-phenanthroline(phen)) have been synthesized, where oxen is N,N'-bis(2-aminoethyl)oxamido di-anion. The crystal structure of [Ni(oxen)Cu(bpy)2](ClO4)2.CH3OH has been determined by X-ray diffraction method. The crystal is triclinic system, space group P1 with a=12.179(1),b=12.298(2), c=11.476(2) A, a=97.57(1), B=97.52(1), 7=80.29(2), V=1669.04(67) A3, Z=2, Dcalcd=1.667 g/cm3. The structure has been refined to final R of 0.076 and Rw of 0.080, respectively. The complexes have an extended oxamido-bridged structure and consist of Ni(Ⅱ) ion in a square planar environment and Cu(Ⅱ) ion in a distorted octahedral environment.     

Studies on the Oxazaborolidine-catalyzed Enantioselective Reduction of 3-Morpholin-4-yl-1-phenyl-1-propanone with Density Functional Theory

Density functional theory (DFT) has been applied to study the enantioselective reduction of 3-morpholin-4-yl-l-phenyl-l-propanone with borane catalyzed by (S)-4-benzyl-5,5-diphenyl-l,3,2-oxazaborolidine at the B3LYP/6-31G* level. All molecular species involved in the four reaction steps have been fully optimized and the structural parameters are provided, and the micro process of reaction was also investigated. The catalyst-alkoxyborane adduct formed in step Ⅲ exhibits a B-O-B-N tetra-atomic ring. Reaction coordination calculations show that BH3 can react with 3-morpholin-4-yl-l-phenyl-l-propanone spontaneously, resulting in the need of 2 tool BH3 in the reaction.     

Preparation and characterization of polytetrafluoroethylene‐polyacrylate core–shell nanoparticles

Polytetrafluoroethylene (PTFE)‐polyacrylate core–shell nanoparticles were produced by using PTFE micropowder and acrylate via seeded emulsion polymerization in the presence of fluorosurfactant. The properties of emulsion under various polymerization conditions were investigated and optimized. The chemical composition of the PTFE‐polyacrylate nanoparticles was characterized by Fourier‐transform infrared spectrometry (FTIR). The particle size and core–shell structure of the resulting PTFE‐polyacrylate nanoparticles were confirmed by transmission electron microscopy (TEM). Wettability of the PTFE‐polyacrylate core–shell particles was higher than the pristine PTFE. The formation of this kind of PTFE‐polyacrylate core–shell nanoparticles could improve the compatibility of PTFE with other materials because PTFE is covered by polyacrylate shell, which make them promising in various fields. Copyright © 2007 John Wiley & Sons, Ltd.     

二硫化钴多孔风叶结构助力肼辅助高效电解产氢

以泡沫镍(NF)为基底,采用一步水热法制备了主晶相为CoS₂、夹杂少量NiO相、具有三维多孔风叶结构的CoS₂/NF电极材料。当溶液中钴硫物质的量之比为1∶5时,在140℃下保温18 h,获得了由10 nm厚度的纳米片构成的三维风叶结构的晶态CoS₂/NF电催化剂。CoS₂/NF在肼氧化及析氢反应中均表现出优异的催化性能,在水合肼碱性介质中,获得-10 mA·cm^-2的析氢电流密度时,需要的过电势仅为83 mV,获得50 mA·cm^-2的氧化电流密度时,需要的肼氧化电位仅为51 mV(vs RHE);在水合肼辅助电解水双功能电解槽中,获得100 mA·cm^-2的电流密度时,需要的分解槽压仅为0.550 V,远低于其在同条件下全水分解的2.075 V,大幅减小了电能消耗,极大地提高了电解水产氢效率。无论在三电极体系还是双电极体系,CoS₂/NF均表现出优异的长效稳定性及耐用性。分析认为,电极表面多孔风叶结构的形成,...