互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Dispersion state and catalytic properties of vanadia species on the surface of V_2O_5/TiO_2 catalysts

The dispersion state and catalytic properties of anatase-supported vanadia species are studied by means of X-ray diffraction (XRD), laser Raman spectroscopy (LRS), H2 temperature-programmed reduction (TPR) and the selective oxidation of o-xylene to phthalic anhydride. The almost identical values of the experimental dispersion capacity of V2O5 on anatase and the surface vacant sites available on the preferentially exposed (001) plane of anatase suggest that the highly dispersed vanadium cations are bonded to the vacant sites on the surface of anatase as derived by the incorporation model. When the loading amount of V2O5 is far below its dispersion capacity, the dispersed vanadia species might mainly consist of isolated VOx species bridging to the surface through V-O-Ti bonds. With the increase of V2O5 loading the isolated vanadia species interact with their nearest neighbors (either isolated or polymerized vanadia) through bridging V-O-V at the expenses of V-O-Ti bonds, resulting in the increase of the ra     

二芳基乙烯类光致变色材料的合成概述

由于具有多种潜在的应用价值, 光致变色化合物作为高级功能材料的研究在国内外广受关注. 在众多的有机光致变色化合物中, 二芳基乙烯特别是二噻吩乙烯, 由于其具有良好的热稳定性和优良的耐疲劳度而成为这类化合物的杰出代表. 近年来, 有关二芳基乙烯类光致变色化合物的各种合成及性能方面的报道已涉及到信息存储、分子开关、逻辑电路、液晶显示、磁性材料等众多领域. 主要是从有机合成的角度, 对这类材料的合成进行了较为全面的概括, 对各种合成方法分别加以介绍和分析, 对其发展趋势予以探索和展望.     

考虑油膜动态过程的海上溢油应急物资调度优化

针对溢油应急响应中海上油膜所具有的动态特性,综合考虑需求点的时变物资需求、运输网络的不确定性以及物资调度决策与外部决策环境之间的相互作用关系之后,构建了效率目标与成本目标相结合的多目标海上溢油应急物资调度优化模型。根据模型的特点,提出了一种基于鲸鱼算法的求解方法。该算法利用非线性收敛因子克服了算法后期易陷入局部最优的不足,同时还引入小生境共享机制以确保解的多样性。最后,通过仿真案例对模型与算法的有效性与可行性进行了验证。结果表明,该方法可以为决策者提供高质量的决策支持。     

我国区域绿色技术创新效率的分类测度和提升模式研究——基于非期望产出的SBM-SupSBM模型

本文首先运用考虑非期望产出的SBM-SupSBM模型估计我国各省市绿色技术创新效率并进行分类:稳定上升类、平稳类、大幅度波动类以及下降类。之后从企业内部和外部两方面对绿色技术创新效率提升的影响因素提出假设,着重考虑大幅度波动类别省份的效率提升。运用面板数据模型各影响因素进行验证,结论显示:企业规模对绿色技术创新效率波动较大的省份起到显著的抑制作用,环境规制和技术进步对绿色技术创新效率波动较大的省份作用不明显。针对分析结果,提出结论:在提升绿色技术创新效率的过程中,应注重企业规模和技术进步的协同作用,以及技术的开放程度。     

体温计模型的临界行为

提出一个可用离散朗之万方程描述的体温计模型.该体温计的特点是其温度示数只能随外界温度的升高而上升,当外界温度降低时,其示数却不能下降.根据体温计示数这种只升不降的特点,定义了“停顿”事件.用随机行走的理论解析地推导了停顿时间分布函数数值模拟和解析结果都显示这种分布函数呈幂律形式D(s)∝s^-ξ,揭示出在这一过程中所表现出的临界性. 关键词：     

Phase Selectively Soluble Dendritic Derivative of 4-(Dimethylamino)- pyridine: An Easily Recyclable Catalyst for Baylis-Hillman Reactions

Among the reactions in which C-C bonds are formed, the Baylis-Hillman coupling of aldehydes with α, β-unsaturated carbonylic compounds is currently attracting much interest due to the atom economy, the mild conditions and the generation of functional groups1,2. Furthermore, compared to the Heck, Suzuki and other palladium catalyzed C-C bond forming reaction3, the Baylis-Hillman reaction can be promoted by using organic bases in the complete absence of any metal4. However, almost all the …     

Synthesis and applications of photochromic fulgides in optical information storages

A pyrryl substituted photocbromic fulgide, (1-p-methoxyphenyl-2-methyl-5-phenyl)-3-pyrryl-ethylidene (isopropylidene) succinic anhydride, was synthesized. Its chemical structure was identified by IR, 1H NMR MS and elemental analysis. The title compound was used to prepare the optical disks by the spin coating method and the vacuum evaporation method. The results of the static state examination show that the optical disks prepared with this kind of molecules possess excellent thermal stability and fatigue resistance, i.e. over 450 writing-erasing recycles, the relative contrast between writing state and erasing state remains at 40%.     

DETECTION OF T_g BY MODULATED DIFFERENTIAL SCANNING CALORIMETRY

The glassy transition of the polyethylene terephthalate (PET) sampleswhich have been subjected to solvent induced crystallization (SINC) was investigated bymodulated differential scanning calorimetry (MDSC) and density measurement. The dif-ferential of heat capacity signal, d C_p/dT from MDSC, was used to monitor the SINCprocess. It reveals that the T_g temperature shifts to higher value with the advancement ofSINC. When the toluene-immersing time was longer (168h), the detection of T_g becomemore difficult, because some smaller peaks emerged at the lower temperatures and theseare explained as the movement of small segments in the amorphous region. These observedresults are due to the morphology and structure introduced by the SINC process.     

Photochromism of cis(z)-1,2-bispyrryl-substituted ethene derivatives

Photochromism of two bispyrryl-substituted ethenes, 2, 3-bis-(1-p-methoxyphenyl-5-phenyl-2-methyl-3-pyrryl)-2-butene (BPE1) and 2,3-bis(1-p-bromophenyl-4-phenyl-2-methyl-3-pyrryl)-2-butene (BPE2), was studied by laser flash photolysis technique. The results indicate that photocyclization of these compounds proceeds mainly via the excited triplet state, and the cis-trans isomerization proceeds mainly via the excited singlet state. After UV laser pulse irradiation, both photocylization and cis-trans isomerization of BPEl occur, but photocydization is the main reaction. On the other hand, laser photolysis of BPE2 leads mainly to photocydization. The effects of the substituents on the photochromic mechanism are also discussed.