Impact of the Type of Crosslinking Agents on the Properties of Modified Sodium Alginate/Poly(vinyl Alcohol) Hydrogels

Here, we report on studies on the influence of different crosslinking methods (ionic and chemical) on the physicochemical (swelling ability and degradation in simulated body fluids), structural (FT-IR spectra analysis) and morphological (SEM analysis) properties of SA/PVA hydrogels containing active substances of natural origin. First, an aqueous extract of Echinacea purpurea was prepared using a Soxhlet apparatus. Next, a series of modified SA/PVA-based hydrogels were obtained through the chemical crosslinking method using poly(ethylene glycol) diacrylate (PEGDA, M_n = 700 g/mol) as a crosslinking agent and, additionally, the ionic reaction in the presence of a 5% w/v calcium chloride solution. The compositions of SA/PVA/E. purpurea-based hydrogels contained a polymer of natural origin—sodium alginate (SA, 1.5% solution)—and a synthetic polymer—poly(vinyl alcohol) (PVA, M_n = 72,000 g/mol, 10% solution)—in the ratio 2:1, and different amounts of the aqueous extract of E. purpurea—5, 10, 15 or 20% (v/v). Additionally, the release behavior of echinacoside from the polymeric matrix was evaluated in phosphate-buffered saline (PBS) at 37 °C. The results indicate that the type of the crosslinking method has a direct impact on the release profile. Consequently, it is possible to design a system that delivers an active substance in a way that depends on the application.     

The Mitochondria-Independent Cytotoxic Effect of Leflunomide on RPMI-8226 Multiple Myeloma Cell Line

Leflunomide, an anti-inflammatory agent, has been shown to be effective in multiple myeloma (MM) treatment; however, the mechanism of this phenomenon has not been fully elucidated. The aim of the study was to assess the role of mitochondria and dihydroorotate dehydrogenase (DHODH) inhibition in the cytotoxicity of leflunomide in relation to the MM cell line RPMI 8226. The cytotoxic effect of teriflunomide—an active metabolite of leflunomide—was determined using MTT assay, apoptosis detection, and cell cycle analysis. To evaluate DHODH-dependent toxicity, the cultures treated with teriflunomide were supplemented with uridine. Additionally, the level of cellular thiols as oxidative stress symptom was measured as well as mitochondrial membrane potential and protein tyrosine kinases (PTK) activity. The localization of the compound in cell compartments was examined using HPLC method. Teriflunomide cytotoxicity was not abolished in uridine presence. Observed apoptosis occurred in a mitochondria-independent manner, there was also no decrease in cellular thiols level. Teriflunomide arrested cell cycle in the G2/M phase which is not typical for DHODH deficiency. PTK activity was decreased only at the highest drug concentration. Interestingly, teriflunomide was not detected in the mitochondria. The aforementioned results indicate DHODH- and mitochondria-independent mechanism of leflunomide toxicity against RPMI 8226 cell line.     

Detection of drug active ingredients by chemometric processing of solid-state NMR spectrometry data -- the case of acetaminophen

This paper presents a preliminary study in building discriminant models from solid-state NMR spectrometry data to detect the presence of acetaminophen in over-the-counter pharmaceutical formulations. The dataset, containing 11 spectra of pure substances and 21 spectra of various formulations, was processed by partial least squares discriminant analysis (PLS-DA). The model found coped with the discrimination, and its quality parameters were acceptable. It was found that standard normal variate preprocessing had almost no influence on unsupervised investigation of the dataset. The influence of variable selection with the uninformative variable elimination by PLS method was studied, reducing the dataset from 7601 variables to around 300 informative variables, but not improving the model performance. The results showed the possibility to construct well-working PLS-DA models from such small datasets without a full experimental design.     

Cellulose-TiO2 nanocomposite with enhanced UV–Vis light absorption

TiO₂/N-cellulose nanocomposite was successfully prepared in the (cyclohexyl)hexyl-dimethylammonium acetate–dimethyl sulfoxide solution. The obtained composite was characterized with various techniques like UV–Vis/DR, FTIR/DRS, X-ray diffraction, thermogravimetric analysis, DLS method and BET SSA measurements. TiO₂/N-cellulose nanocomposite exhibited high UV–Vis light absorption with energy gap shifted to the visible region. Additive of TiO₂/N photocatalyst to cellulose-IL-DMSO solution leads to obtaining the material with higher thermostability and limited photoactivity.     

New Applications of Ph 3 P=N--Li in Organic Synthesis and Heteroatom Chemistry

The lithium triphenylaminophosphonium azayldiide 1 proved again to be a very good tool in organic synthesis, allowing further synthesis of various compounds such as vinyl nitriles, aromatic or heteroaromatic nitriles, and mono-, bis-, and trisphosphinimines.     

Unexpected Factors Affecting the Kinetics of Guest Molecule Release from Investigation of Binary Chemical Systems Trapped in a Single Void of Mesoporous Silica Particles

In this work, we present results for loading of well-defined binary systems (cocrystal, solid solution) and untreated materials (physical mixtures) into the voids of MCM-41 mesoporous silica particles employing three different filling methods. The applied techniques belong to the group of “wet methods” (diffusion supported loading – DiSupLo ) and “solvent-free methods” (mechanical ball-mill loading – MeLo , thermal solvent free – TSF ). As probes for testing the guest1-guest2 interactions inside the MCM-41 pores we employed the benzoic acid ( BA ), perfluorobenzoic acid ( PFBA ), and 4-fluorobenzoic acid ( 4-FBA ). The guests intermolecular contacts and phase changes were monitored employing magic angle spinning (MAS) NMR Spectroscopy techniques and powder X-ray diffraction (PXRD). Since mesoporous silica materials are commonly used in drug delivery system research, special attention has been paid to factors affecting guest release kinetics. It has been proven that not only the content and composition of binary systems, but also the loading technique have a strong impact on the rate of guests release. Innovative methods of visualizing differences in release kinetics are presented.     

Synthesis of unsymmetrical alkyl acetals via addition of primary alcohols to allyl ethers mediated by ruthenium complexes

Abstract  

Ru-catalyzed synthesis of mixed alkyl–alkyl acetals via addition of primary alcohols to allyl ethers has been extended to include long-chain and/or functionalized substrates. The catalytic systems for these reactions were generated from RuCl₂(PPh₃)₃ and [RuCl₂(1,5-COD)]_x and phosphines [PPh₃ or P(p-chlorophenyl)₃] or SbPh₃. Of particular importance is the almost quantitative elimination of transacetalization. The addition proceeds through allyl complexes, not via isomerization of allyl ethers––subsequent addition of ROH to vinyl ethers.     

Deposition of poly(styrene/alpha-tert-butoxy-omega-vinyl-benzyl-polyglycidol) microspheres on mica plates crossing the liquid-air interface: formation of stripe pattern

Formation of stripelike assemblies of poly(styrene/alpha-tert-butoxy-omega-vinyl-benzyl-polyglycidol) microspheres adsorbed on nonpatterned mica plates moving perpendicularly from suspension of particles through the water-air interface has been observed. It was found that ordered assemblies were formed by capillary forces acting on particles crossing the water-air boundary. At sufficiently high rates of plate movement (i.e., at appropriate dynamic loading conditions) the adsorbed microspheres approaching the water surface begin sliding on the plate, due to capillary forces, in the direction opposite to the plate movement and are kept below the water surface. Plate movement brings new adsorbed particles to the water-air interface, where particles are assembled into aggregates. When particle aggregates are large, the capillary forces cannot overcome shearing forces and the particle assemblies are withdrawn on the plate above the water surface. This process repeated during continuous movement of the plate results in the formation of the quite regularly distributed stripes of adsorbed microspheres. Formation of the regularly distributed particle assemblies depends on concentration of microspheres in suspension.     

Comparison of protein precipitation methods for various rat brain structures prior to proteomic analysis

Sample preparation is a fundamental step in proteomic methodologies. The quality of the results from a proteomic experiment is dependent on the nature of the sample and the properties of the proteins. In this study, various pre-treatment methods were compared by proteomic analysis; we analysed various rat brain structures after chloroform/methanol, acetone, TCA/acetone and TCA protein precipitation procedures. The protein content of the supernatant was also examined by 2-DE. We found that for four of the rat brain structures, precipitation with chloroform/methanol and acetone delivered the highest protein recovery for top-down proteomic analysis; however, TCA precipitation resulted in good protein separation and the highest number of protein spots in 2-DE. Moreover, TCA precipitation also gave high efficiency of protein recovery if prior sonication procedure was performed.     

Revisiting Thin-Layer Chromatography as a Lipophilicity Determination Tool. Part III — A Study on CN Adsorbent Layers

JPC – Journal of Planar Chromatography – Modern TLC -