Dissociation behavior of doubly-charged tryptic peptides: correlation of gas-phase cleavage abundance with ramachandran plots

Analysis of fragmentation patterns from 5654 unique doubly charged tryptic peptides is obtained. Great variability of average relative abundance of bond cleavage is found between different amino acid combinations. There exist similarities as well as differences between b and y ions. Strong enhancement or suppression of cleavage gives insight into possible chemical interactions at reactive conformations formed by preferred phi-psi angles.     

Time evolution studies of the H2O/quartz interface using sum frequency generation, atomic force microscopy, and molecular dynamics

Many interfacial studies on solid surfaces, for example, quartz/water, assume that a standard cleaning procedure regenerates the surface reproducibly. In the reported work, the results of two surface specific techniques, sum frequency generation (SFG) spectroscopy and atomic force microscopy, show that the effects of prolonged exposure to Nanopure water and to pH 10 NaOH are distinctly different. In conjunction with the experimental data, molecular mechanics is used to correlate the SFG spectral frequencies to the hydrogen stretching vibrations of the surface-bound water molecules. It is found that after 17 days of soaking in water, water molecules penetrate into the SiO2 matrix to produce a swollen and amorphous layer; it is likely that broken Si-O bonds from the polishing process serve as nucleation sites for hydration and swelling. Disorder introduced in the interfacial water layer is detected by the rising intensity of the weakly hydrogen-bonded SFG peak at 3450 cm(-1). Dominance of the 3450 cm(-1) is absent in a pH 10, NaOH-soaked quartz disk, indicating that the strong hydrogen-bonded network in water remains intact.     

Determination of perfluorooctanoic acid (PFOA) extractable from the surface of commercial cookware under simulated cooking conditions by LC/MS/MS

Salts of pentadecafluorooctanoic acid (PFOA) are polymerization aids used in the manufacture of fluoropolymers; one of the applications of fluoropolymers is the coating of metal cookware products. A method was developed to determine if PFOA might be present in and extracted from the surface of commercial frying pans coated with a DuPont fluoropolymer under simulated cooking conditions. Commercial grade cookware was obtained, then extracted with water and ethanol/water mixtures at 100 and 125 degrees C, and the resulting extracts were analyzed by liquid chromatography tandem mass spectrometry (LC/MS/MS). Detection and quantification limits as low as 100 pg cm(-2) were demonstrated. None of the fluoropolymer treated cookware samples analyzed showed detectable levels of PFOA when extracted under simulated cooking conditions.     

Extending the use of certified reference sediments for assessment of accuracy in determinations of trace metals

Straightforward analysis for components in a single certified reference sediment is of limited use for assessing the accuracy of environmental determinations. A systematic approach requires mixing of certified sediments, one with another and with environmental samples, and the preparation of secondary reference material by the laboratory. Use of Youden pairs, reference material embedded in samples and linear models should enable valid accuracy statements to be made based on well known statistical concepts. For assessing accuracy, reference sediments which are matched in particle size, and are end-members for components or sediment types are most useful.     

A new photochemically removable protecting group for amines

A new arylmethylsulfonyl chloride reacts with secondary or primary amines to give sulfonamides which can be photochemically cleaved, making it suitable for use as a photoremovable protecting group.     

General deoxyribozyme-catalyzed synthesis of native 3'-5' RNA linkages

An elusive goal for nucleic acid enzymology has been deoxyribozymes that ligate RNA rapidly, sequence-generally, with formation of native 3'-5' linkages, and in preparatively useful yield. Using in vitro selection, we have identified Mg2+- and Zn2+-dependent deoxyribozymes that simultaneously fulfill all four of these criteria. The new deoxyribozymes operate under practical incubation conditions and have modest RNA substrate sequence requirements, specifically D downward arrowRA for 9DB1 and A downward arrowR for 7DE5 (D = A, G, or U; R = A or G). These requirements are comparable to those of deoxyribozymes such as 10-23 and 8-17, which are already widely used as biochemical tools for RNA cleavage. We anticipate that the 9DB1 and 7DE5 deoxyribozymes will find immediate practical application for RNA ligation.     

Open-tubular capillary electrochromatography/electrospray ionization-mass spectrometry using polymeric surfactant as a stationary phase coating

We describe the use of the polymeric surfactant poly(sodium undecylenic sulfate) (poly-SUS) as a stationary phase coating in open-tubular capillary electrochromatography (OT-CEC) coupled with electrospray ionization-mass spectrometry (ESI-MS) for the analysis of beta-blocker and benzodiazepine analytes. The production of a polymeric surfactant coating on the capillary inner wall involves (i) adsorption of the cationic polymer poly(diallyldimethylammonium chloride) (PDADMAC) to the inner surface of capillary, and (ii) adsorption of the negatively charged poly-SUS onto the cationic polymer layer via strong physical interaction of the two polymer layers. As compared with micellar electrokinetic chromatography (MEKC) coupled with ESI-MS, the main advantage of this proposed method is minimization of introduction of the monomeric or polymeric surfactant into the mass spectrometer, thus avoiding the interference of the nonvolatile micelle in ESI-MS. The effects of buffer pH and applied voltage on the separation of the analytes are also discussed. Under optimum conditions, four of the five beta-blockers and four benzodiazepines are separated.     

Immunochemical determination of dioxins in sediment and serum samples

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are considered highly toxic contaminants and the environmental and biological monitoring of these compounds is of great concern. Immunoassays may be used as screening methods to satisfy the growing demand for rapid and low cost analysis. In this work, we describe the application of an immunoassay that uses 2,3,7-trichloro-8-methyldibenzo-p-dioxin (TMDD) as a surrogate standard for 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) to sediment and human serum samples. Sample extraction and preparation methods were developed with the aim to establish the simplest, cost-effective and efficient removal of the matrix interferences in the enzyme-linked immunosorbent assay (ELISA). The overall method for sediments is based on a hexane extraction; clean up by a multilayered silica gel column and an activated carbon column; an organic solvent exchange with DMSO–Triton X-100 and ELISA measurement. The gas chromatography–high resolution mass spectrometry (GC–HRMS) validation studies (n = 13) revealed that the method is suitable for the toxic equivalents (TEQ) screening of dioxin in sediments with a method detection limit of about 100 pg g⁻¹ dry sediment with a precision of 13–33% R.S.D. The analysis of a large number of samples originating from different sources would be required to establish more precisely the screening level, as well as the number of false positives and negatives of dioxin TEQ by the immunoassay for sediments. The immunoassay method for sediment analysis offers improvement in speed, sample throughput, and cost in comparison to GC–HRMS. Dioxins were determined in serum samples after a simple liquid–liquid extraction and solvent exchange into DMSO–Triton X-100 without further dilution. The current method (approximate method LOQ of 200 pg ml⁻¹ serum) is not sufficiently sensitive for the determination of dioxins in serum to measure acceptable exposure limit.     

Novel stereoselective control over cis vs trans opening of benzo[c]phenanthrene 3,4-diol 1,2-epoxides by the exocyclic N(2)-amino group of deoxyguanosine in the presence of hexafluoropropan-2-ol

We describe a novel and efficient synthesis (62-84% yields) of the eight possible, diastereomerically pure, cis and trans, R and S O(6)-allyl-protected N(2)-dGuo phosphoramidite building blocks derived through cis and trans opening of (+/-)-3alpha,4beta-dihydroxy-1beta,2beta-epoxy-1,2,3,4-tetrahydrobenzo[c]phenanthrene [BcPh DE-1 (1)] and (+/-)-3alpha,4beta-dihydroxy-1alpha,2alpha-epoxy-1,2,3,4-tetrahydrobenzo[c]phenanthrene [BcPh DE-2 (2)] by hexafluoropropan-2-ol (HFP)-mediated addition of O(6)-allyl-3',5'-di-O-(tert-butyldimethylsilyl)-2'-deoxyguanosine (3) at C-1 of the epoxides. Simply changing the relative amount of HFP used in the reaction mixture can achieve a wide ratio of cis/trans addition products. Thus, the observed cis/trans adduct ratio for the reaction of DE-1 (1) in the presence of 5 equiv of 3 varied from 17/83 to 91/9 over the range of 5-532 equiv of HFP. The corresponding ratios for DE-2 (2) varied from 2/98 to 61/39 under the same set of conditions. When 1 or 2 was fused with a 20-fold excess of 3 at 140 degrees C in the absence of solvent HFP, almost exclusive trans addition (>95%) was observed for the both DEs. Through the use of varying amounts of HFP in the reaction mixture as described above, each of the eight possible phosphoramidite oligonucleotide building blocks (DE-1/DE-2, cis/trans, R/S) of the BcPh DE N(2)-dGuo adducts can be prepared in an efficient fashion. To rationalize the varying cis-to-trans ratio, we propose that the addition of 3 to 1 or 2 in the absence of solvent or in the presence of small amounts of HFP proceeds primarily via an S(N)2 mechanism to produce mainly trans-opened adducts. In contrast, increasing amounts of HFP promote increased participation of an S(N)1 mechanism involving a relatively stable carbocation with two possible conformations. One of these conformations reacts with 3 to give mostly trans adduct, while the other conformation reacts with 3 to give mostly cis adduct.