Solid phase extraction of trace amount of Cu(II) using functionalized-graphene

A novel and selective method for the fast determination of trace amounts of Cu(II) ions in water samples has been developed. The first organic-solution-processable functionalized-graphene (SPF-Graphene) hybrid material with porphyrins, porphyrin-graphene nanohybrid, 5-(4-aminophenyl)-10, 15, 20-triphenyl porphyrin and its photophysical properties including optical (TPP) and grapheme oxide molecules covalently bonded together via an amide bond (TPP-NHCO-SPFGraphene) were used as absorbent for extraction of Cu(II) ions by solid phase extraction method. The complexes were eluted with HNO₃ (2 M) 10% (vol/vol) methanol in acetone and determined the analyte by flame atomic absorption spectrometry. The procedure is based on the selective formation of Cu(II) at optimum pH by elution with organic eluents and determination by flame atomic absorption spectrometry. The method is based on complex formation on the surface of the ENVI-18 DISK? disks modified porphyrin-graphene nanohybrid, 5-(4-aminophenyl)-10,15,20-triphenyl porphyrin (TPP) and grapheme oxide molecules covalently bonded together via an amide bond (TPP-NHCO-SPFGraphene) followed by stripping of the retained species by minimum amounts of appropriate organic solvents. The elution is efficient and quantitative. The effect of potential interfering ions, pH, TPP-NHCO-SPFGraphene, amount, stripping solvent, and sample flow rate were also investigated. Under the optimal experimental conditions, the break-through volume was found to about 1000 mL providing a preconcentration factor of 600. The maximum capacity of the disks was found to be 398 ± 3 μg for Cu²⁺. The limit of detection of the proposed method is 5 ng per 1000 mL. The method was applied to the extraction and recovery of copper in different water samples.     

A novel and easy route to 1,3,4-thiadiazine derivatives via the three-component reaction of phenylhydrazine, α-bromo aryl ketones and aryl isothiocyanates

The three-component condensation of phenylhydrazine, α-bromo aryl ketones and aryl isothiocyanates leading to 1,3,4-thiadiazine derivatives is described.     

Numerical study of laminar pulsed impinging jet on the metallic foam blocks using the local thermal non-equilibrium model

Journal of Thermal Analysis and Calorimetry - In this study, thermal performance of an impingement jet with the presence of porous block is numerically investigated. The study is comprised of two...     

Voltammetric Determination of Hemoglobin Using a Pencil Lead Electrode

In this paper the electrochemical behavior of hemoglobin (Hb) immobilized on a pencil lead electrode (PLE) was investigated. Immobilization of Hb on the pencil lead electrode was performed by nonelectrochemical and electrochemical methods. In phosphate buffer solution with pH 7.0 Hb showed a pair of well‐defined and nearly reversible redox waves (the anodic and cathodic peak potentials are located at ?0.18 V and ?0.22 V, respectively). The dependence of the anodic peak potential (E_pa) on the pH of the buffer solution indicated that the conversion of Hb? Fe(III)/Hb? Fe(II) is a one‐electron‐transfer reaction process coupled with one‐proton‐transfer. In addition the effect of scan rate on peak currents and peak separation potential was investigated and electrochemical parameters such as α and k_s were calculated. In the second part of this work, the ability of the electrode for determination of Hb concentration was investigated. The results showed a linear dynamic range from 0.15 to 2 µM and a detection limit of 0.11 µM. The relative standard deviation is 4.1 % for 4 successive determinations of a 1 µM Hb solution.     

Introducing curcumin as an electrochemical DNA hybridization indicator and its application for detection of human interleukin-2 gene

In this paper, the application of curcumin (CU) as a non-toxic electrochemical DNA hybridization indicator was described. Hybridization investigations on a pencil graphite electrode surface as a transducer using oligonucleotides containing only one base type, including poly A, poly T, poly C, and poly G as probe and as related complementary/non-complementary sequences, showed that CU has no specific interaction with each of the oligonucleotides of DNA. Furthermore, results showed good interaction between CU and the hybridized form of oligonucleotides; thus, the extent of hybridization was evaluated based on the difference between differential pulse voltammetry (DPV) signals of CU accumulated on the probe-pencil graphite electrode (PGE) and CU accumulated on the probe-target-PGE. Then, the developed biosensor was successfully applied for the detection of short sequences of human interleukin-2 (hIL-2) gene as a model. A hybridization experiment with non-complementary oligonucleotide showed that the suggested DNA sensor responds selectively to the target. At optimized conditions, two linear ranges were obtained for hIL-2 gene, first from 50 to 1000 pM and second from 0.01 to 1 μM with a detection limit of 12 pM. 7.0) containing 20 mM NaCl.     

Simultaneous Determination of Nitrite and Hydrogen Peroxide Using Hemoglobin Modified Pencil Lead Electrode as a Novel Biosensor: Application to the Analysis of Mother’s Milk

In the present paper simultaneous determination of nitrite and hydrogen peroxide using hemoglobin modified pencil lead electrode (Hb/PLE) prepared by a simple and rapid electroless method was described. In the first part of the work the reduction of NO₂ and H₂O₂ at the modified electrode was investigated by cyclic voltammetry. Then under optimal conditions using differential pulse voltammetry, the biosensor could be used for the determination of H₂O₂ at concentration ranging from 5 to 240 M and NO₂ at concentration ranging from 10 to 240 M. The detection limits were 3×10^?6 and 5×10^?6 M, for NO₂ and H₂O₂ respectively. Differential pulse voltammetry also used for the simultaneous determination of NO₂ and H₂O₂. This modified electrode successfully used for the determination of NO₂ and H₂O₂ in tap water and mother’s milk samples.     

Ultratrace determination of lead,cadmium and copper in environmental and biological samples by atomic absorption spectrometry after their separation and preconcentration using octadecyl silica membrane disks modified with a new n–s schiff base

Pb(II), Cd(II) and Cu(II) ions were separated and preconcentrated by solid-phase extraction on octadecyl-bonded silica membrane disks modified with a new S–N-containing Schiff base (bis-2-thiophenal propandiamine) (BTPD) followed by elution and atomic absorption spectrometric detection. The method was applied as a separation and detection method for lead(II), cadmium(II) and copper(II) in environmental and biological samples. Extraction efficiency and the influence of sample matrix, flow rate, pH, and type and minimum amount of stripping acid were investigated. The maximum capacity of the membrane disks modified by 4?mg of BTPD was found to be 668 ± 10, 480 ± 8 and 454 ± 7?µg of lead, cadmium and copper, respectively. The limit of detection of the proposed method is 0.25, 0.01 and 0.02?ng/mL for lead, cadmium and copper, respectively.