Cumulative indices for Spectrochima Acta, Part A and Spectrochimica Acta, Part B

This article is an electronic publication in Spectrochimica Acta Electronica (SAE), a section of Spectrochimica Acta, Part B (SAB). The hardcopy text is accompanied by an electronic archive, stored on the SAE homepage at http://www.elsevier.nl/locate/sabe. The archive contains data, index and program files. The main article discusses the bibliographical purpose of the program and data files. A collective index for Spectrochimica Acta for volumes since it was split into Parts A and B, and continuing through 1991 for SAA and 1997 for SAB, is presented in DBF format, along with rudimentary data entry and access software.     

The Neutral Part of the Bark of Pinus Luchuensis Mayer

The neutral part of the acetone extract from the bark of Pinus luchuensis Mayer has been investigated and found to consist of alkanes (C₂₂–C₃₄) and triterpenes of serratene type. The triterpenes are 3β–methoxyserrat–14–en–21–one, serrat–14–en–3, 21–dione, 3β–hydroxyserrat–14–en–21–one, 3β–21α–dimethoxyserrat–l4–ene and 3β–methoxyserrat–14–en–21α–ol.     

An electronic aid for line selection for scanning inductively coupled plasma atomic emission spectrometers

This article is an electronic publication in Spectrochimica Acta Electronica (SAE), the electronic section of Spectrochimica Acta Part B (SAB). Accompanying this hard copy text is a disk containing the program, source flies, data files and a brief manual along with a few programming notes. The main article discusses the purpose of this work, and the Appendix provides brief instruction on the use of the program, manipulation of the data, and source code. An automatic file selection system for the control of a rapid scanning spectrometer performing atomic emission spectrometry has been developed using the PROLOG language. The system can be “taught” the elemental composition of a given sample type. It uses this information (when available) to generate a linear search strategy which minimizes the number of lines that need to be measured. The rules used by the system can be observed during system operation to allow a trace of the logic. Reading of the initial data base takes no more than 6 s and then decisions are made in less than 1 s per line.     

Preparation and photoelectron spectrum of the glycine molecular anion: assignment to a dipole-bound electron species with a high-dipole moment, non-zwitterionic form of the neutral core

We report the gas-phase preparation of negatively charged glycine as well as the Gly(H(2)O)(1,2) (-) complexes by entrainment of the neutral precursor into an ionized supersonic expansion tuned to optimize the (H(2)O)(n) (-)Ar(m) clusters. The photoelectron spectrum of Gly(-) displays the signature of a dipole-bound species, with sufficient vibrational fine structure to characterize the core neutral as a higher energy, non-zwitterionic isomer of the amino acid.     

Structure and Thermodynamics of NaF-AlF(3) Melts with Addition of CaF(2) and MgF(2)

The NaF-AlF(3) system with additions of CaF(2) and MgF(2) has been studied with Raman and vapor pressure measurements for 3 >/= CR (NaF/AlF(3) molar ratio) >/= 1 and up to 50 mol % additive. The results show that the binary melt can be described using the two equilibria AlF(6)(3)(-) = AlF(6)(2)(-) + F(-) and AlF(5)(2)(-) = AlF(4)(-) + F(-) with equilibrium constants 0.25 and 0.05, respectively, at 1293 K. Both reactions have positive reaction enthalpies. The first equilibrium is strongly shifted to the right resulting in a melt mixture with very low AlF(6)(3)(-) concentrations even at the Na(3)AlF(6) composition. Evidence for nonideal mixing of anions was found. For the ternaries, models based on Raman data are presented and compared with vapor pressure measurements. Good agreement is observed when association between the additives, CaF(2) or MgF(2), with the AlF(5)(2)(-) ions in the melt was considered. This association could be experimentally observed through a band broadening and a slight shift in the AlF(5)(2)(-) band frequency. Our vapor pressures and Raman data both indicate that MgF(2) clearly acts as an acid when added to NaF-AlF(3) melts of any composition. When CaF(2) is added, a slight decrease of vapor pressure occurs. Raman data indicate a decrease of AlF(4)(-) concentration, corresponding to a dissociation of CaF(2) with liberation of F(-) ions. All these results are, however, very much dependent on the initial melt composition. These data are explained in terms of acid-base, dilution, and association reactions of the solute with the solvent.     

Charge Dispersal in the Quinuclidine Radical Cation and in the Quinuclidinium Ion,as Revealed by PE and ICR Spectroscopy

The n ionization energies I and the gas-phase basicities GB of CH₃-, Cl-, or CN-substituted quinuclidines have been measured by PE and ICR spectroscopy. The dependence of the shifts ΔI and ΔGB (relative to the values of the parent molecule) allow conclusions about the charge dispersal accompanying the n ionization or the protonation of quinuclidine in the gas phase. The agreement with the results of a minimal basis set ab initio calculation is excellent. Comparison of the solution pK_a values with either I or GB reveals that 2-substituted quinuclidines exhibit sizeable solvent-induced proximity effects, i.e. that the corresponding quinuclidinium ions are more acidic in solution than expected on the basis of the gas-phase basicities. This agrees with earlier results concerning 2-substituted pyridines.     

Reaction du meta-diisopropyl-phenyllithium-chrometricarbonyle avec le monoxyde de carbone

The complex CpV(CO)₃THF has been prepared in THF solution (i) photochemically from CpV(CO)₄, and (ii) from [CpV(H)(CO)₃]^?/[Ph₃C]⁺ at low temperatures. THF is replaced by [CpV(H)(CO)₃]^? to form [{CpV(CO)₃}₂-μ-H]^?, and by various ligands L with C, η²-CC, Sn, N, O, S, Se or Te functionality to yield CpV(CO)₃L and cis-[CpV(CO)₂LL] (LL = bipy, o-phen, tolane). The δ (⁵¹V) values range over ca. 1400 ppm and allow the assignment of distinct coordination modes for ambidentate ligands. The temperature gradient is ca. +1.2 ppm/deg. For [CpV(SnCl₃)(CO)₃]^? (δ ?1340 ppm rel. to VOCl₃), ¹J(⁵¹V-^117,119Sn) is 900 Hz. The isotope effect on introducing ¹²CO for ¹³CO in CpV(CO)₄ is ?0.48(2) ppm; ¹J(⁵¹V-¹³C) 107 Hz.     

ortho-metallation reactions involving some triphenyl phosphite complexes of osmium

Osmium triphenylphosphine complexes, OsH₄(PPh₃)₃, OsH₂ (CO)(PPh₃)₃ and OsHCl(CO)(PPh₃)₃ react with triphenyl phosphite in boiling organic solvents to yield triphenyl phosphite derivatives which subsequently undergo ortho-metallation reactions.     

Binding energies of hydrogen molecules to isoreticular metal-organic framework materials

Recently, several novel isoreticular metal-organic framework (IRMOF) structures have been fabricated and tested for hydrogen storage applications. To improve our understanding of these materials, and to promote quantitative calculations and simulations, the binding energies of hydrogen molecules to the MOF have been studied. High-quality second-order Moller-Plesset (MP2) calculations using the resolution of the identity approximation and the quadruple zeta QZVPP basis set were used. These calculations use terminated molecular fragments from the MOF materials. For H2 on the zinc oxide corners, the MP2 binding energy using Zn4O(HCO2)6 molecule is 6.28 kJ/mol. For H2 on the linkers, the binding energy is calculated using lithium-terminated molecular fragments. The MP2 results with coupled-cluster singles and doubles and noniterative triples method corrections and charge-transfer corrections are 4.16 kJ/mol for IRMOF-1, 4.72 kJ/mol for IRMOF-3, 4.86 kJ/mol for IRMOF-6, 4.54 kJ/mol for IRMOF-8, 5.50 and 4.90 kJ/mol for IRMOF-12, 4.87 and 4.84 kJ/mol for IRMOF-14, 5.42 kJ/mol for IRMOF-18, and 4.97 and 4.66 kJ/mol for IRMOF-993. The larger linkers are all able to bind multiple hydrogen molecules per side. The linkers of IRMOF-12, IRMOF-993, and IRMOF-14 can bind two to three, three, and four hydrogen molecules per side, respectively. In general, the larger linkers have the largest binding energies, and, together with the enhanced surface area available for binding, will provide increased hydrogen storage. We also find that adding up NH2 or CH3 groups to each linker can provide up to a 33% increase in the binding energy.     

The synthesis and conformational analysis of tetrahydro-1,2,4-oxadiazines

The synthesis and variable temperature ¹H and ¹³C NMR spectra of three tetrahydro-1,2,4-oxadiazines are reported. The N(4)-Me inversion barriers are 6.8–7.0 (ax→ts) and 7.4–7.9 kcal mol^?1 (eq→ts) with ΔG° 0.6–0.9 kcal mol^?1. The N(2)-Me inversion barriers are 10.4–11.4 (ax→ts) and 11.6–13.1 kcal mol^?1 (eq→ts) with ΔGδ 1.2–1.7 kcal mol^?1. The barrier to ring inversion is ca. 12.7 kcal mol^?1. “R value” analysis shows the ring to have a 56.5±2δ dihedral angle about the C(5)-(6) bond, indicative of the expected chair conformation.