Optical properties of p-type CuAlO2 thin film grown by rf magnetron sputtering

We report the structural and optical properties of copper aluminium oxide (CuAlO₂) thin films, which were prepared on c-plane sapphire substrates by the radio frequency magnetron sputtering method. X-ray photoelectron spectroscopy (XPS) along with X-ray diffraction (XRD) analysis confirms that the films consist of delafossite CuAlO₂ phase only. The optical absorption studies show the indirect and direct bandgap is 1.8 eV and 3.45 eV, respectively. Room temperature photoluminescence (PL) measurements show three emission peaks at 360 nm (3.45 eV), 470 nm (2.63 eV) and 590 nm (2.1 eV). The first one is near band edge emission while the other two are originated from defects.     

Growth and annealing of zinc-blende CdSe thin films on GaAs (0 0 1) by molecular beam epitaxy

CdSe thin films have been grown on GaAs (0 0 1) substrates by molecular beam epitaxy (MBE). The effects of substrate temperature and annealing treatment on the structural properties of CdSe layers were investigated. The growth rate slightly decreases due to the accelerated desorption of Cd from CdSe surface with an increase in the temperature. The sample grown at 260 °C shows a polycrystalline structure with rough surface. As the temperature increases over 300 °C, crystalline CdSe (0 0 1) epilayers with zinc-blende structure are achieved and the structural quality is improved remarkably. The epilayer grown at 340 °C displays the narrowest full-width at half-maximum (FWHM) from (0 0 4) reflection in double-crystal X-ray rocking curve (DCXRC) and the smallest root-mean-square (RMS) roughness of 0.816 nm. Additionally, samples fabricated at 320 °C were annealed in air for 30 min to study the films’ thermal stability. X-ray diffraction (XRD) results indicate that the zinc-blende structure remains unchanged when the annealing temperature is elevated to 460 °C, meaning a good thermal stability of the cubic CdSe epilayers.     

Interactions between CdSe/CdS quantum dots and DNA through spectroscopic and electrochemical methods

The interaction of CdSe/CdS quantum dots (QDs) with Herring sperm-DNA (hs-DNA) has been studied by UV-vis spectroscopy and electrochemical method. Cu(phen)₂^2+/1+ (phen = 1, 10-phenanthroline) was used as an indicator for electroactive dsDNA or ssDNA. The apparent association constant has been deduced (4.94 × 10³ M⁻¹ and 2.39 × 10² M⁻¹) from the absorption spectral changes of the dsDNA-QDs and ssDNA-QDs. The results of dissociation method suggest that Cu(phen)₂^2+/1+ is more easily dissociated from dsDNA or ssDNA modified gold electrode (dsDNA/Au or dsDNA/Au) in presence of QDs. The dissociation rate constant (k) of Cu(phen)₂^2+/1+ on dsDNA/Au is 4.48 times higher than that in absence of QDs, while k is 2.34 times higher than that in absence of QDs on ssDNA/Au in Tris buffer with low ionic strength (pH 7.0, 0.5 mM NaCl). The results illuminate that hs-DNA has high affinity for QDs due to electrostatic force, hydrogen bonds, and van der Waals interactions, and the binding force of QDs with dsDNA is stronger than ssDNA.     

连续螺旋折流板蒸发器壳侧流动换热数值模拟研究

本文对相同几何尺寸的连续螺旋折流板蒸发器与传统弓形折流板蒸发器进行对比性的数值模拟研究,结果表明:在相同壳侧体积流量和折流板数条件下,连续螺旋折流板蒸发器的传热因子和摩擦因子约是弓形折流板的1/3和1/4;当以换热因子和摩擦因子比值评价蒸发器综合性能时,连续螺旋折流板蒸发器比弓形折流板蒸发器提高57%;当最小流通截面流...     

A novel simulation method to evaluate the collection performance of a monolithic active pixel sensor

A novel simulation method is presented in this paper to evaluate the collection performance of monolithic active pixel sensor (MAPS) devices for minimum ionizing particle tracking. A simplified 3D matrix pixel structure is built using the computer aided design software Sentaurus. The virtual device is then divided into hundreds of parts and an independent customized X photon model is involved in each part to simulate the conditions under ⁵⁵Fe radiation. After data processing and analysis, charge collection efficiency, collection time and diffusion conditions can be estimated in detail. In order to verify the reliability of the method, comparisons are made between the simulations and experiments. Although there are some defects, it can be concluded that the proposed idea is a feasible method for the evaluation of the MAPS collection performance.     

Frequency dispersive complex permittivity and permeability of ferromagnetic metallic granular composite at microwave frequencies

We experimentally studied the frequency dependent complex permittivity ε and permeability μ of composite composed of carbonyl iron powder (CIP) and epoxy resin in the frequency range 1-18 GHz. We found that the intrinsic ε and μ of CIP extracted from the measured ε and μ of composites follow the classical Maxwell equations and the Landau-Lifshitz-Gilbert (LLG) equation, respectively. The dependences of ε and μ of composites on the volume fraction of CIP (vf_CIP) were investigated using the two-exponent phenomenological percolation equation (TEPPE). We found that the TEPPE can fit the experimental results very well. Comparing the results of percolation parameters derived by experimental data at different frequencies, we show that the TEPPE is frequency independent for the composites at microwave frequencies. The results also show that the ε and μ spectrums of composites with definite vf_CIP can be correctly calculated by combining the TEPPE with the theoretical models of intrinsic ε and μ.     

Dependence structure of the Korean stock market in high frequency data

This paper analyzes the evolution of the dependence structure for various time window intervals, known as Epps effect, using the Trade and Quote data of 663 actively traded stocks in Korean stock market. It is found that the random matrix theory analysis could not represent the dependence structure of the stock market in the microstructure regime. The Cook-Johnson copula is introduced as a parsimonious alternative method to handle this problem, and the existence of the Epps effect is confirmed for the 663 stocks using high frequency data. It was also found that large capitalization companies tend to have a stronger dependence structure, except for the largest capitalization group, since the phenomenon of price level resistance leads to the weak dependence structure in the largest capitalization group. In addition, grouping the industry as a sub-portfolio is an appropriate approach for hour interval traders, whereas this approach is not a strategy recommended for high frequency traders.     

Paradoxical high signal intensity of hepatocellular carcinoma in the hepatobiliary phase of Gd-EOB-DTPA enhanced MRI: initial experience

Purpose

To describe the paradoxical high signal intensity of hepatocellular carcinoma (HCC) in the hepatobiliary phase on gadolinium-ethoxybenzyl-diethylenetriamine pentaacetic acid (Gd-EOB-DTPA)-enhanced magnetic resonance imaging (MRI).

Materials and Methods

A database search was performed to identify cases of HCC that showed unusual prolonged enhancement in the hepatobiliary phase of Gd-EOB-DTPA MRI. All patients received 3.0-T liver MRI including precontrast T1-weighted images, T2-weighted images and a post Gd-EOB-DTPA-enhanced dynamic study. The signal intensity of HCC was measured at pre-enhanced, arterial, portal, delayed and hepatobiliary phase using regions of interest. Radiologic and pathologic correlation was performed for the paradoxically prolonged enhancing portion of HCC in the hepatobiliary phase.

Results

Four patients (all male, age range 44-70; mean 57.5 years) were included in this study. All patients showed HCC lesions that were low signal intensity (SI) on T1-WI, high SI on T2-WI, enhanced in arterial phase, and washed-out in delayed phase. All cases showed paradoxically high SI in hepatobiliary phase, which was unusual for HCC. Pathologically, they were all diagnosed as well-differentiated HCC with prominent cytoplasm and a bile secreting appearance.

Conclusion

HCC may demonstrate the prolonged high signal intensity at the hepatobiliary phase on Gd-EOB-DTPA enhanced MRI. These HCCs tended to be highly differentiated and to have prominent bile secretion.     

Dielectric properties of thin-film ZrO<Subscript>2</Subscript> up to 50 GHz for RF MEMS switches

The dielectric properties of zirconium dioxide (ZrO₂) ceramic thin films were characterized up to 50 GHz using coplanar waveguides (CPWs) and metal–insulator–metal (MIM) capacitors with top circular electrodes. The ZrO₂ films were deposited using a chemical solution onto high-resistivity Si wafers and metal layers. The real part of the dielectric constant of approximately 22 and 26 was extracted at 50 GHz for CPW and MIM structures, respectively, and the loss tangent was approximately 0.09 at 50 GHz. C–V and I–V measurements were carried out to determine low-frequency and DC dielectric properties. The measurement results indicate that ZrO₂ is a promising material to be used as a dielectric layer for radio-frequency (RF) microelectromechanical systems (MEMS) capacitive switches.