Electrically actuated, pressure-driven microfluidic pumps

In order to make the lab-on-a-chip concept a reality, it is desirable to have an integrated component capable of pumping fluids through microchannels. We have developed novel, electrically actuated micropumps and have integrated them with microfluidic systems. These devices utilize the build-up of electrolysis gases to achieve pressure-driven pumping, only require small voltages (approximately 10 V), and have approximate dimensions of 5 cm x 3 cm x 2 cm. Furthermore, these micropumps are composed of relatively inexpensive materials, and the reversible sealability of their poly(dimethylsiloxane) body to different microfluidic arrays enables repeated uses of the same pump. Under an applied potential of 10 V, three different micropumps had average flow rates of 8-13 microL min(-1) for water being pumped through five different 2 cm-long, 5500 microm(2) cross-sectional-area channels in poly(methyl methacrylate), in approximate agreement with predicted pump rates. We have also evaluated pump operation at the lower applied potential of 8 V and observed an average flow rate of 6.1 microL min(-1) for a pump-channel system. The current micropump design is capable of sustaining pumping pressures in the range of 300 kPa. The various advantages of these micropumps make them well suited for use in lab-on-a-chip analysis techniques.     

Six‐coordinate Co2+ with imidazole,NH3, and H2O ligands: Approaching spin crossover

Octahedral, six‐coordinate Co²⁺ can exist in two spin states: S = 3/2 and S = 1/2. The difference in energy between high spin (S = 3/2) and low spin (S = 1/2) is dependent on both the ligand mix and coordination stereochemistry. B3LYP calculations on combinations of neutral imidazole, NH₃, and H₂O ligands show that low‐spin isomers are stabilized by axial H₂O ligands and in structures that also include trans pairs of equatorial NH₃ and protonated imidazole ligands, spin crossover structures are predicted from spin state energy differences. Occupied Co d orbitals from the DFT calculations provide a means of estimating effective ligand strength for homoleptic and mixed ligand combinations. These calculations suggest that in a labile biological system, a spin crossover environment can be created. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Determination of fluoride in wine by fluoride selective ion electrode, standard addition method: collaborative study

The accuracy, precision, and reproducibility of a rapid method for determination of fluoride in wine, using a fluoride selective ion electrode, were established by a collaborative study involving 12 laboratories, 5 in Europe and 7 in the United States. The laboratories assayed 6 Youden pairs of fluoride-fortified, red and white wine samples with fluoride concentrations ranging from 0.2 to 3.0 mg/L. The relative standard deviations of repeatability ranged from 1.94 to 4.88%; relative standard deviations of reproducibility ranged from 4.15 to 18.40%. HORRAT values ranged from 0.30 to 0.97. The average recovery was 99.97%. Based on the statistical results of this collaborative study, the Study Director recommends that this method be adopted First Action.     

Hafnium oxide and zirconium oxide atomic layer deposition: initial precursor and potential side-reaction product pathways with H/Si(100)-2 x 1

Hybrid density functional calculations have been carried out using cluster models of the H/Si(100)-2 x 1 surface to investigate the mechanistic details of the initial surface reactions occurring in the atomic layer deposition of hafnium and zirconium oxides (HfO2 and ZrO2). Reaction pathways involving the metal precursors ZrCl4, Zr(CH3)4, HfCl4, and Hf(CH3)4 have been examined. Pathways leading to the formation of a Zr-Si or Hf-Si linkage show a significant sensitivity to the identity of the leaving group, with chloride loss reactions being both kinetically and thermodynamically less favorable than reactions leading to the loss of a methyl group. The energetics of the Zr(CH3)4 and Hf(CH3)4 reactions are similar with an overall exothermicity of 0.3-0.4 eV and a classical barrier height of 1.1-1.2 eV. For the reaction between H2O and the H/Si(100)-2 x 1 surface, the activation energy and overall reaction enthalpy are 1.6 and -0.8 eV, respectively. Due to contamination, trace amounts of H2O may be encountered by metal precursors, leading to the formation of minor species that can lead to unanticipated side-reaction pathways. Such gas-phase reactions between the halogenated and alkylated metal precursors and H2O are exothermic with small or no reaction barriers, allowing for the possibility of metal precursor hydroxylation before the H/Si surface is encountered. Of the contaminant surface reaction pathways, the most kinetically favorable corresponds to the surface -OH deposition. Interestingly, for the hydroxylated metal precursors, a unique reaction pathway resulting in the direct formation of Si-O-Zr and Si-O-Hf linkages has been identified and found to be the most thermodynamically stable pathway available, being exothermic by approximately 1.0 eV.     

Corynebactin and enterobactin: related siderophores of opposite chirality

Most species of bacteria employ siderophores to acquire iron. The chirality of the ferric siderophore complex plays an important role in cell recognition, uptake, and utilization. Corynebactin, isolated from Gram-positive bacteria, is structurally similar to enterobactin, a well known siderophore isolated from Gram-negative bacteria, but contains L-theronine instead of L-serine in the trilactone backbone. Corynebactin also contains a glycine spacer unit in each of the chelating arms. A hybrid analogue (serine-corynebactin) has been synthesized. The chirality and relative conformational stability of the three ferric complexes of enterobactin, corynebactin, and the hybrid has been investigated. In contrast to enterobactin, corynebactin assumes a Lambda configuration. However, the ferric serine-corynebactin hybrid forms a racemic mixture, only slightly favoring the Lambda conformation.     

Manganese detection in marine sediments: anodic vs. cathodic stripping voltammetry

Three different electroanalytical techniques for the detection of manganese in marine sediments are evaluated. The anodic stripping voltammetry of manganese at an in situ bismuth-film-modified boron-doped diamond electrode and cathodic stripping voltammetry at a carbon paste electrode are shown to lack the required sensitivity and reproducibility whereas cathodic stripping voltammetry at a bare boron-doped diamond electrode is shown to be reliable and selective with a limit of detection, from applying a 60 s accumulation period of 7.4 × 10⁻⁷ M and a sensitivity of 0.24 A M⁻¹. The method was used to evaluate the manganese content of marine sediments taken from Šibenik, Croatia.     

Multiple time scale Hartree–Fock molecular dynamics

This is the first application of a rigorous, established multiple time-step method to ab initio molecular dynamics. The resulting algorithm is conceptually simple and easy to implement, but very effective. It translates the large mass differences present in ab initio molecular dynamics into substantial savings in computer time while retaining high accuracy. This transforms ab initio molecular dynamics from a desirable but prohibitively expensive possibility into a viable method, at least for short-time phenomena in small systems or for otherwise inaccessibly complicated potential energy surfaces. © 1993 John Wiley & Sons, Inc.     

FREQUENCY OF ULTRAVIOLET RADIATION-INDUCED MUTATION AT THE hprt LOCUS IN REPAIR-PROFICIENT MURINE FIBROBLASTS TRANSFECTED WITH THE denV GENE OF BACTERIOPHAGE T4

Abstract— Thc frequency of spontaneous and ultraviolet radiation (UVR)-induced mutation at the hprt locus was determined in control and denV-transfected, repair-proficient murine fibroblasts. Control cells removed an average of 25% of pyrimidine dimers induced by exposure to 150 J/m²UVR from an FS40 sunlamp within 24 h; under the same conditions of induction and repair, denV-transfected cells removed an average of 71% of pyrimidine dimers. Control cells were somewhat more resistant than denV-transfected cells to killing by UVR. The average frequency of spontancous mutation at the hprt locus for control and denV-transfected cells was 3 and 15 6-thioguanine (6-TG)-resistant colonies per 10⁶ surviving cells, respectively; there was no statistically significant difference between control and dcnV-transfected cells. However, after exposure to 75 or 150 J/m² UVR, denV-transfected cells had a significantly lower frequency of mutation to 6-TG resistance. After exposure to a fluence of 75 J/m², the average frequency of UVR-induced mutation at the hprt locus was 166 mutant colonies per lo^h surviving cells for control cells and 92 mutant colonies for denV-transfectcd cells; after 150 J/m², control cells had 205 6-TG-resistant colonies per 10⁶ cells, while dmV-transfected cclls had 61 mutant colonies. These results demonstrate that UVR-induced pyrimidine dimers are mutagenic photoproducts in mammalian cells.     

Effects of DNA secondary structure on oligonucleotide probe binding efficiency

Secondary structure motifs in nucleic acid probes generally impair intended hybridization reactions and so efforts to predict and avoid such structures are commonly employed in probe design schemes. Another key facet of probe design that has received much less attention, however, is that secondary structure at targeted probe binding site regions may also impair hybridization. Thus, evaluation of both probe and target site secondary structures together should improve hybridization prediction and design effectiveness. Several challenges confound this goal, including imperfect empirical rules and parameters underlying predictions and the fact that folding algorithms scale poorly with respect to sequence length. Here, we attempt to quantify the consequences of target site structure on predicted hybridization using sequences sampled from the human genome. We also provide a methodology for choosing a reasonable “window size” around target sites that is as small as possible without compromising folding algorithm prediction accuracy.     

Electrochemical and spectroscopic characterization of the novel charge-transfer ground state in diimine complexes of ytterbocene

The novel charge-transfer ground state found in alpha,alpha'-diimine adducts of ytterbocene (C(5)Me(5))(2)Yb(L) [L = 2,2'-bipyridine (bpy) and 1,10-phenanthroline (phen)] in which an electron is spontaneously transferred from the f(14) metal center into the lowest unoccupied (pi*) molecular orbital (LUMO) of the diimine ligand to give an f(13)-L(*)(-) ground-state electronic configuration has been characterized by cyclic voltammetry, UV-vis-near-IR electronic absorption, and resonance Raman spectroscopies. The voltammetric data demonstrate that the diimine ligand LUMO is stabilized and the metal f orbital is destabilized by approximately 1.0 V each upon complexation for both bpy and phen adducts. The separation between the ligand-based oxidation wave (L(0/-)) and the metal-based reduction wave (Yb(3+/2+)) in the ytterbocene adducts is 0.79 V for both bpy and phen complexes. The UV-vis-near-IR absorption spectroscopic data for both the neutral adducts and the one-electron-oxidized complexes are consistent with those reported recently, but previously unreported bands in the near-IR have been recorded and assigned to ligand (pi*)-to-metal (f orbital) charge-transfer (LMCT) transitions. These optical electronic excited states are the converse of the ground-state charge-transfer process (e.g., f(13)-L(*-) <--> f(14)-L(0)). These new bands occur at approximately 5000 cm(-1) in both adducts, consistent with predictions from electrochemical data, and the spacings of the resolved vibronic bands in these transitions are consistent with the removal of an electron from the ligand pi* orbital. The unusually large intensity observed in the f --> f intraconfiguration transitions for the neutral phenanthroline adduct is discussed in terms of an intensity-borrowing mechanism involving the low-energy LMCT states. Raman vibrational data clearly reveal resonance enhancement for excitation into the low-lying pi* --> pi* ligand-localized excited states, and comparison of the vibrational energies with those reported for alkali-metal-reduced diimine ligands confirms that the ligands in the adducts are reduced radical anions. Differences in the resonance enhancement pattern for the modes in the bipyridine adduct with excitation into different pi* --> pi* levels illustrate the different nodal structures that exist in the various low-lying pi* orbitals.