In search of covalently bound tetra- and penta-oxygen species: a photoelectron spectroscopic and Ab initio investigation of MO4- and MO5- (M = Li,Na, K,Cs)

Although neutral and ionic O4(0/-/+) species have been observed experimentally and considered for energetic materials, O4(2-) and O5(2-) dianions have not yet been explored. O4(2-) is valent isoelectronic to the well-known ClO3- and SO3(2-) anions, and O5(2-) is valent isoelectronic to ClO4- and SO4(2-). All are stable, common anions in solutions and inorganic salts. In this article, we explore the possibility of making covalently bound O4(2-) and O5(2-) species stabilized in the forms of M+O4(2-) and M+O5(2-) (M = Li, Na, K, Cs) in the gas phase. Laser vaporization experiments using M-containing targets and an O2-seeded carrier gas yielded very intense mass peaks corresponding to MO4- and MO5-. To elucidate the structure and bonding of the newly observed MO4- and MO5- species, we measured their photoelectron spectra and then compared them with ab initio calculations and the spectra of ClO3-, Na+SO3(2-), ClO4-, and Na+SO4(2-). Careful analyses of the experimental and ab initio results showed, however, that the observed species are of the forms, O2-M+O2- and O2-M+O3-. The more interesting M+O4(2-) and M+O5(2-) species were found to be higher-energy isomers, but they are true minima on the potential energy surfaces, which suggests that it might be possible to synthesize bulk materials containing covalently bound tetra- and pentatomic oxygen building blocks.     

Use of biosensors for rapid drug residue analysis without sample deconjugation or clean-up: a possible way forward.

The drug salbutamol (SBL) is a beta-agonist that may be used illegally as an animal growth promoter. SBL is also a good example of a drug which is excreted in the form of glucuronides and sulfates. Such metabolites cause complexities in analysing for the presence of drug residues. In the majority of cases a process of deconjugation and sample clean-up is required prior to analysis. This is both time consuming and causes some loss of accuracy. In this study, the urine of calves treated with SBL orally for 3 d was collected during and after medication. Samples were assayed before and after hydrolysis by two different methods, radioimmunoassay (RIA) and a newly developed biosensor immunoassay (BIA). Some samples were also analysed by GC-MS. The results clearly showed that both screening assays (RIA and BIA) found high concentrations of SBL residues throughout the study. This was especially true in the BIA method. It was also demonstrated that urine sample analysis without the need for deconjugation or clean-up could be achieved. Results obtained by GC-MS tended to be an order of magnitude lower than the corresponding screening test results. This work showed that biosensor based veterinary drug residue testing procedures can be developed which can generate results in real time without the need for time consuming sample preparation.     

NMR kinetic studies on the decomposition of beta-amidozinc reagents: optimization of palladium-catalyzed cross-coupling with acid chlorides

The decomposition of beta-amidozinc reagent 4 by beta-elimination has been shown to be a unimolecular process in both THF and DMF as solvent, with relative rates of 4:1 at room temperature, and activation parameters have been determined. These results indicate the beta-elimination is a syn-process. NMR experiments reveal that as little as 2 equiv of DMF can have a significant stabilizing influence on reagent 4. Use of a mixture of DMA and toluene as the bulk solvent, in place of DMF, has allowed successful palladium-catalyzed cross-coupling reactions of both 4 and the homologous reagent 5 with acid chlorides to yield unsymmetrical ketones (nine examples).     

Rapid Prototyping of Low‐Loss IR Chalcogenide‐Glass Waveguides by Controlled Remelting

A method for fabricating infrared‐transmitting waveguides that yields low optical losses and strong confinement of light is presented. The method minimises the number of fabrication steps by exploiting the photosensitivity of arsenic trisulfide glass, using it both as a photoresist and as a waveguiding material. Controlled annealing/remelting of the waveguides minimises scattering due to fluctuations in refractive index at the interface between the waveguide and the surrounding medium, allowing low losses to be realised. Bends and Y‐splitter structures have been realised, as well as the longest As₂S₃ serpentine planar waveguides yet reported.     

An automated instrument for human STR identification: design, characterization, and experimental validation

The microfluidic integration of an entire DNA analysis workflow on a fully integrated miniaturized instrument is reported using lab‐on‐a‐chip automation to perform DNA fingerprinting compatible with CODIS standard relevant to the forensic community. The instrument aims to improve the cost, duration, and ease of use to perform a “sample‐to‐profile” analysis with no need for human intervention. The present publication describes the operation of the three major components of the system: the electronic control components, the microfluidic cartridge and CE microchip, and the optical excitation/detection module. Experimental details are given to characterize the level of performance, stability, reliability, accuracy, and sensitivity of the prototype system. A typical temperature profile from a PCR amplification process and an electropherogram of a commercial size standard (GeneScan 500?, Applied Biosystems) separation are shown to assess the relevance of the instrument to forensic applications. Finally, we present a profile from an automated integrated run where lysed cells from a buccal swab were introduced in the system and no further human intervention was required to complete the analysis.     

NMR determination of smectic ordering of probe molecules

The NMR spectra of the three solutes ortho-, meta-, and para-dichlorobenzene in the nematic and smectic A phases of the liquid crystals 8CB and 8OCB are analyzed to yield two orientational order parameters for each solute. Extrapolation of the asymmetry in the energy parameters that describe the orientational ordering in the nematic phase are used to provide estimates of the strength of the nematic potential in the smectic A phase. The experimentally determined asymmetry of the orientational order parameters in the smectic A phase is then used in conjunction with Kobayashi-McMillan theory applied to solutes to give information about the smectic A layering and the nematic/smectic A coupling. In both smectic A solvents, the solute smectic coupling constant, tau, is negative (with the origin fixed at the center of the smectic layer) for all solutes. The signs and relative values of tau indicate that the ortho and para solutes favor the interlayer region while the meta solute is more evenly distributed throughout the layers.     

Tuning cell adhesion on gradient poly(2-hydroxyethyl methacrylate)-grafted surfaces

A simple yet versatile method was developed to prepare a low-density polymerization initiator gradient, which was combined with surface-initiated atom transfer radical polymerization (ATRP) to produce a well-defined poly(2-hydroxyethyl methacrylate) (HEMA) gradient substrate. A smooth variation in film thickness was measured across the gradient, ranging from 20 A to over 80 A, but we observed a nonmonotonic variation in water contact angle. Fits of X-ray reflectivity profiles suggested that at the low graft density end, the polymer chain structure was in a "mushroom" regime, while the polymer chains at high graft density were in a "brush" regime. It was found that the "mushroom" region of the gradient could be made adhesive to cells by adsorbing adhesion proteins, and cell adhesion could be tuned by controlling the density of the polymer grafts. Fibroblasts were seeded on gradients precoated with fibronectin to test cellular responses to this novel substrate, but it was found that cell adhesion did not follow the expected trend; instead, saturated cell adhesion and spreading was found at the low grafting density region.     

MX3(-) superhalogens (M = Be, Mg, Ca; X = Cl, Br): a photoelectron spectroscopic and ab initio theoretical study

Gas-phase alkaline earth halide anions, MgX3(-) and CaX3(-) (X = Cl, Br), were produced using electrospray and investigated using photoelectron spectroscopy at 157 nm. Extremely high electron binding energies were observed for all species and their first vertical detachment energies were measured as 6.60 +/- 0.04 eV for MgCl3(-), 6.00 +/- 0.04 eV for MgBr3(-), 6.62 +/- 0.04 eV for CaCl3(-), and 6.10 +/- 0.04 eV for CaBr3(-). The high electron binding energies indicate these are very stable anions and they belong to a class of anions, called superhalogens. Theoretical calculations at several levels of theory were carried out on these species, as well as the analogous BeX3(-). Vertical detachment energy spectra were predicted to compare with the experimental observations, and good agreement was obtained for all species. The first adiabatic detachment energies were found to be substantially lower (by about 1 eV) than the corresponding vertical detachment energies for all the MX3(-) species, indicating extremely large geometry changes between MX3(-) and MX3. We found that all the MX3(-) anions possess D3h ((1)A1') structures and are extremely stable against dissociation into MX2 and X-. The corresponding neutral species MX3, however, were found to be only weakly bound with respect to dissociation toward MX2 + X. The global minimum structures of all the MX3 neutrals were found to be C2v ((2)B2), which can be described as (X2(-))(MX+) charge-transfer complexes, whereas the MX2...X (C2v, (2)B1) van der Waals complexes were shown to be low-lying isomers.