Transport properties of overheated electrons trapped on a helium surface

An ultra-strong photovoltaic effect has recently been reported for electrons trapped on a liquid helium surface under a microwave excitation tuned at intersubband resonance [D. Konstantinov, A.D. Chepelianskii, K. Kono, J. Phys. Soc. Jpn 81, 093601 (2012)]. In this article, we analyze theoretically the redistribution of the electron density induced by an overheating of the surface electrons under irradiation, and obtain quantitative predictions for the photocurrent dependence on the effective electron temperature and confinement voltages. We show that the photo-current can change sign as a function of the parameters of the electrostatic confinement potential on the surface, while the photocurrent measurements reported so far have been performed only at a fixed confinement potential. The experimental observation of this sign reversal could provide a reliable estimation of the electron effective temperature in this new out of equilibrium state. Finally, we have also considered the effect of the temperature on the outcome of capacitive transport measurement techniques. These investigations led us to develop, numerical and analytical methods for solving the Poisson-Boltzmann equation in the limit of very low temperatures which could be useful for other systems.     

Collaborative study for the detection of toxic compounds in shellfish extracts using cell-based assays. Part I: screening strategy and pre-validation study with lipophilic marine toxins

Human poisoning due to consumption of seafood contaminated with phycotoxins is a worldwide problem, and routine monitoring programs have been implemented in various countries to protect human consumers. Following successive episodes of unexplained shellfish toxicity since 2005 in the Arcachon Bay on the French Atlantic coast, a national research program was set up to investigate these atypical toxic events. Part of this program was devoted to fit-for-purpose cell-based assays (CBA) as complementary tools to collect toxicity data on atypical positive-mouse bioassay shellfish extracts. A collaborative study involving five laboratories was conducted. The responses of human hepatic (HepG2), human intestinal (Caco2), and mouse neuronal (Neuro2a) cell lines exposed to three known lipophilic phycotoxins-okadaic acid (OA), azaspiracid-1 (AZA1), and pectenotoxin-2 (PTX2)-were investigated. A screening strategy composed of standard operating procedures and a decision tree for dose-response modeling and assay validation were designed after a round of "trial-and-error" process. For each toxin, the shape of the concentration-response curves and the IC(50) values were determined on the three cell lines. Whereas OA induced a similar response irrespective of the cell line (complete sigmoid), PTX2 was shown to be less toxic. AZA1 induced cytotoxicity only on HepG2 and Neuro2a, but not on Caco2. Intra- and inter-laboratory coefficients of variation of cell responses were large, with mean values ranging from 35 to 54 % and from 37 to 48 %, respectively. Investigating the responses of the selected cell lines to well-known toxins is the first step supporting the use of CBA among the panel of methods for characterizing atypical shellfish toxicity. Considering these successful results, the CBA strategy will be further applied to extracts of negative, spiked, and naturally contaminated shellfish tissues.     

Quantitative interpretation of the very fast electronic relaxation of most Ln3+ ions in dissolved complexes

In a reference frame rigidly bound to the complex, we consider two Hamiltonians possibly at the origin of the very fast electronic relaxation of the paramagnetic lanthanide Ln(3+) ions (Ln = Ce to Nd, Tb to Yb), namely the mean (static) ligand-field Hamiltonian and the transient ligand-field Hamiltonian. In the laboratory frame, the bombardment of the complex by solvent molecules causes its Brownian rotation and its vibration-distorsion dynamics governing the fluctuations of the static and transient terms, respectively. These fluctuations are at the origin of electronic relaxation. The electronic relaxation of a Ln(3+) ion is defined by the decays of the time correlation functions (TCFs) of the longitudinal and transverse components of the total angular momentum J of its ground multiplet. The Brownian rotation of the complex and its vibration-distorsion dynamics are simulated by random walks, which enable us to compute the TCFs from first principles. It is shown that the electronic relaxation is governed mainly by the magnitude of the transient ligand-field, and not by its particular expression. The range of expected values of this ligand-field together with the lower limit of relaxation time enforced by the values of the vibration-distortion correlation time in liquids give rise to effective electronic relaxation times which are in satisfactory overall agreement with the experimental data. In particular, these considerations explain why the electronic relaxation times vary little with the coordinating ligand and are practically independent of the external field magnitude.     

Is Bitcoin’s Carbon Footprint Persistent? Multifractal Evidence and Policy Implications

The Bitcoin mining process is energy intensive, which can hamper the much-desired ecological balance. Given that the persistence of high levels of energy consumption of Bitcoin could have permanent policy implications, we examine the presence of long memory in the daily data of the Bitcoin Energy Consumption Index (BECI) (BECI upper bound, BECI lower bound, and BECI average) covering the period 25 February 2017 to 25 January 2022. Employing fractionally integrated GARCH (FIGARCH) and multifractal detrended fluctuation analysis (MFDFA) models to estimate the order of fractional integrating parameter and compute the Hurst exponent, which measures long memory, this study shows that distant series observations are strongly autocorrelated and long memory exists in most cases, although mean-reversion is observed at the first difference of the data series. Such evidence for the profound presence of long memory suggests the suitability of applying permanent policies regarding the use of alternate energy for mining; otherwise, transitory policy would quickly become obsolete. We also suggest the replacement of ‘proof-of-work’ with ‘proof-of-space’ or ‘proof-of-stake’, although with a trade-off (possible security breach) to reduce the carbon footprint, the implementation of direct tax on mining volume, or the mandatory use of carbon credits to restrict the environmental damage.     

A quasi-optimal convergence result for fracture mechanics with XFEM

The aim of this Note is to give a convergence result for a variant of the eXtended Finite Element Method (XFEM) on cracked domains using a cut-off function to localize the singular enrichment area. The difficulty is caused by the discontinuity of the displacement field across the crack, but we prove that a quasi-optimal convergence rate holds in spite of the presence of elements cut by the crack. The global linear convergence rate is obtained by using an enriched linear finite element method. To cite this article: E. Chahine et al., C. R. Acad. Sci. Paris, Ser. I 342 (2006).     

Role of ɣ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> on the mechanical and microstructural properties of metakaolin-based geopolymer cements

The main target of this work is to investigate the influence of ?-Al₂O₃ on the properties of metakaolin-based geopolymer cements. The kaolin used as starting material for producing geopolymer cements contains approximately 28 and 64% of gibbsite and kaolinite, respectively. This kaolin was transformed to metakaolins by calcination at 500, 550, 600, 650, and 700?°C for 1?h. Gibbsite contained in kaolin was transformed to γ-Al₂O₃ during the calcination process. The hardener was obtained by mixing commercial sodium silicate and sodium hydroxide solution (10?M) with a mass ratio sodium silicate/sodium hydroxide equal to 1.6:1. Geopolymer cements, GMK-500, GMK-550, GMK-600, GMK-650, and GMK-700, were obtained using the prepared hardener with a mass ratio hardener/metakaolin equal to 0.87:1. It could be seen that the specific surface area of metakaolins decreases with increasing the calcination temperature of kaolin owing to the formation of the particles of γ-Al₂O₃. The compressive strengths 18.21/29.14/36.61/36.51 increase in the course GMK-550/GMK-600/GMK-650/GMK-700. The X-ray patterns and micrograph images of geopolymer cements, GMK-600, GMK-650, and GMK-700, indicate the presence of γ-Al₂O₃ in their structure. It was typically found that γ-Al₂O₃ remains largely unaffected during the geopolymerisation, and therefore could act as an inert filler and reinforce the structure of geopolymer cements.

Open image in new window

     

A Simple and Efficient Synthesis of 2-Substituted 3-Diethylphosphono 5-Methylfurans

An efficient carbanionic synthesis of the phosphonic dicarbonylated compounds 2 was achieved and used as key intermediates in the synthesis of the phosphonic furans 4 by acid-induced Paal-Knorr cyclization reaction.     

Microcrystalline testing used in combination with Raman micro‐spectroscopy for absolute identification of novel psychoactive substances

Two new psychoactive substances, namely 4‐methylmethcathinone (mephedrone) and 5,6‐methylenedioxy‐2‐aminoindane (MDAI) were analysed with a novel combination of microcrystalline tests followed by Raman micro‐spectroscopy to facilitate their absolute identification. The discrimination power of the proposed combination was successfully demonstrated through the analysis of the positional isomers 2‐ and 3‐methylmethcathinone. The addition of mercury dichloride as a microcrystalline test reagent produced specific microcrystals of each tested analyte. The robustness of the method was evaluated in the presence of common cutting agents (caffeine and benzocaine) as well as on street samples. The crystal lattice structures of mephedrone, 2‐methylmethcathinone and MDAI mercury dichloride microcrystals were determined by single crystal X‐ray diffraction. This confirmed the presence of both drug and reagent together in the lattice and accounts for the distinct habit of the observed microcrystals. Raman spectra of the formed microcrystals differed from those obtained from their standard salt form by loss and/or gain of some vibrational modes. Particularly important was the appearance of the mercury chloride link to each tested drug molecule which showed as strong bands at low wavenumbers. Its presence was corroborated by its detection in the crystal lattice. It was therefore concluded that microcrystalline testing followed by Raman micro‐spectroscopy satisfies the technique combination requirement for psychoactive substances recommended by the Scientific Working Group for the Analysis of Seized Drugs (SWGDRUG) and provides a rapid and cheap analysis route. The proposed technique combination also aids the development of new microcrystalline tests as it allows for confirmation of the uniqueness of the developed microcrystals almost in‐situ rather than growing single crystals for often long periods of time needed for single crystal X‐ray diffraction analysis. Copyright © 2016 John Wiley & Sons, Ltd.     

Use of noncontact dilatometry for the assessment of the sintering kinetics during mullitization of three kaolinitic clays from Cameroon

Noncontact dilatometry, compared to differential scanning calorimetry (DSC), was used together with scanning electron microscopy and densification behavior studies to investigate the parameters that govern the kinetics of transformation of kaolin to mullite during sintering. Three kaolinitc clays from Cameroon, with different SiO₂/Al₂O₃ molar ratio, were examined. The temperatures of mullite nucleation were 973, 979, and 984 °C at 5 °C/min heating rate, respectively, for values of SiO₂/Al₂O₃ molar ratio equal to 4.22, 2.22, and 2.08. At 20 °C/min heating rate, the temperatures are shifted to higher values, 992, 997, and 1,001 °C. The mullitization phenomenon, which includes a first step of nucleation and a second one of crystal growth, presented activation energy in the range of 650–730 kJ/mol, depending on the nature of the sample investigated. These values, obtained by noncontact dilatometer measurements, were comparable to those obtained by means of DSC and are in agreement with literature values. The difference in sintering kinetics for the three kaolinitic clays could explain the different morphologies obtained for the mullite grains.     

Local structure and thermodynamics of a core-softened potential fluid: theory and simulation.

Phase behavior and structural properties of homogeneous and inhomogeneous core-softened (CS) fluid consisting of particles interacting via the potential, which combines the hard-core repulsion and double attractive well interaction, are investigated. The vapour-liquid coexistence curves and critical points for various interaction ranges of the potential are determined by discrete molecular dynamics simulations to provide guidance for the choice of the bulk density and potential parameters for the study of homogeneous and inhomogeneous structures. Spatial correlations in the homogeneous CS system are studied by the Ornstein-Zernike integral equation in combination with the modified hypernetted chain (MHNC) approximation. The local structure of CS fluid subjected to diverse external fields maintaining the equilibrium with the bulk CS fluid are studied on the basis of a recently proposed third order+second order perturbation density functional approximation (DFA). The accuracy of DFA predictions is tested against the results of a grand canonical ensemble Monte Carlo simulation. Reasonable agreement between the results of both methods proves that the DFA theory applied in this work is a convenient theoretical tool for the investigation of the CS fluid, which is practically applicable for modeling numerous real systems.