VISIBLE CHEMILUMINESCENCE ASSOCIATED WITH THE REACTION BETWEEN METHEMOGLOBIN OR OXYHEMOGLOBIN WITH HYDROGEN PEROXIDE

Abstract Visible chemiluminescence is emitted in the irreversible deactivation of hemoglobin or methemoglobin with excess H₂O₂. The emission takes place in two phases. The most intense one lasts a few seconds and is followed by a second phase of lower intensity that remains for longer periods. This second phase presents chaotic or sustained oscillations. Free radicals are implicated in the luminescent process since the emission can be reduced by free radical scavengers such as 6-hydroxy-2,5,7,8,-tetramethylchroman-2-carboxylic acid (Trolox) or ascorbic acid. These additives lead to a delay in reaching the maximum intensity, which can be related to their consumption, implying substantial recycling of the hemoprotein. Chemiluminescence is also observed in the oxidation of hemin by H₂O₂, suggesting a role for the heme group in the processes leading to the excited state production. The lower intensity observed in the presence of hemin can be related to the contribution of the globin chains.     

Two thiourea‐containing gold(I) complexes

The crystal structures of two salts of bis­(thio­urea)­gold(I) complexes, namely bis­(thio­urea‐κS)­gold(I) chloride, [Au(CH₄N₂S)₂]Cl, (I), and bis­[bis­(thio­urea‐κS)­gold(I)] sulfate, [Au(CH₄N₂S)₂]₂SO₄, (II), have been determined. The chloride salt, (I), is isomorphous with the corresponding bromide salt, although there are differences in the bonding. The Au^I ion is located on an inversion centre and coordinated by two symmetry‐related thio­urea ligands through the lone pairs on their S atoms [Au—S 2.278 (2) Å and Au—S—C 105.3 (2)°]. The sulfate salt, (II), crystallizes with four independent [Au(CH₄N₂S)₂]⁺ cations per asymmetric unit, all with nearly linear S—Au—S bonding. The cations in (II) have similar conformations to that found for (I). The Au—S distances range from 2.276 (3) to 2.287 (3) Å and the Au—S—C angles from 173.5 (1) to 177.7 (1)°. These data are relevant in interpreting different electrochemical processes where gold–thio­urea species are formed.     

Copolymerization of ethylene and non-conjugated diene using homogenous catalyst

Ethylene and different amounts of 1,7-octadiene were copolymerized using the metallocene catalyst system ethylidene-bis(fluorenyl) zirconium dichloride and methylaluminoxane (MAO) at both 50 and 90 °C. The catalyst activity has slightly increased with the addition of low amounts of the diene in relation to the homopolymerization of ethylene. The obtained polymers were characterized according to their melting temperature (T_m) and crystallinity degree (x_c) by differential scanning calorimetry (DSC). Weight-average molecular weight (M_w) and polydispersity were determined by gel permeation chromatography (GPC). Diene contents in the copolymer were obtained through the FTIR spectroscopy. The results indicated that at polymerization temperature of 90 °C, crosslinking bonds in the obtained copolymers were low, differently from what was observed at 50 °C. The diene content in the copolymer achieved more than 3 mol% and the comonomer conversion was around 15%. Moreover, the obtained copolymers have M_w around 100,000 and large polydispersity.     

Molecular structure and polarity of the C3NH carbene

Ab initio MP 2/4-31G ** calculations indicate that the most stable form of C₃NH is bent and singlet and that the linear structure corresponds to a maximum. The effect of changing the CNH angle on the total energy is slight, but it is quite pronounced on the molecular polarity. The wider angle tends to increase the polarity of C₃NH. MP 2/4-31G ** calculations predict a difference of polarity between linear and bent structures of 0.8 D.     

Variable-angle scanning fluorescence spectrometry for the determination of closely overlapped pesticide mixtures

The application of a program written in BASIC for an IBM/PC interfaced with a commercial spectrofluorimeter enables variable-angle scanning fluorescence spectra to be obtained, without modification of the instrument. The technique is effective for determinations of the components of mixtures of carbaryl, fuberidazol and warfarin, all of which are pesticides with intrinsic fluorescence and closely overlapping profiles. The proposed method permitted simultaneous determinations with RSD of less than 2.5% and recoveries of 99–110%.     

The structure of the FeNO group in two metastable states (MS1 and MS2) of the nitroprusside anion in Na2[Fe(CN)5NO].2H2O. Infrared spectra and quantum chemistry calculations for the normal and the 15NO and N18O isotopic substituted substance

Low temperature infrared spectra of light induced metastable states MS1 and MS2 of the nitroprusside anion in Na(2)[Fe(CN)(5)NO].2H(2)O, isotopically normal and substituted with (15)NO and N(18)O, are presented and discussed. As a consequence of the relatively high population of the MS2 state achieved by further irradiation with 1064 nm light of samples previously irradiated with 488.0 nm light, new bands were seen for the first time, and others, previously reported, were confirmed. The comparison of the spectral data obtained for the FeNO moiety of the isotopically normal as well as of the (15)NO and N(18)O substituted anion with the results of quantum chemical (DFT) calculations support the assignment of the bands which appear after successive irradiations to MS1, the linear Fe(eta(1)-ON) linkage isomer, and to MS2, the side-bound Fe(eta(2)-NO) isomer.     

Fitting complex potential energy surfaces to simple model potentials: application of the simplex-annealing method

A stochastic method of optimization, which combines simulated annealing with simplex, is implemented to fit the parameters of a simple model potential. The main characteristic of the method is that it explores the whole space of the parameters of the model potential, and therefore it is very efficient in locating the global minimum of the cost function, in addition to being independent of the initial guess of the parameters. The method is employed to fit the complex intermolecular potential energy surface of the dimer of water, using as a reference the spectroscopic quality anisotropic site-site potential of Feller et al. The simple model potential chosen for its reparameterization is the MCY model potential of Clementi et al. The quality of the fit is assessed by comparing the geometry of the minimum, the harmonic frequencies, and the second virial coefficients of the parameterized potential with the reference one. Finally, to prove more rigorously the robustness of this method, it is compared with standard nonstochastic methods of optimization.     

Chiral comprehensive two-dimensional gas chromatography with electron-capture detection applied to the analysis of chiral polychlorinated biphenyls in food samples

The feasibility of comprehensive two-dimensional gas chromatography with electron-capture detection (GC x GC-ECD) for the enantioseparation of chiral PCBs from other possible interfering compounds has been evaluated. Three commercially available enantioselective beta-cyclodextrin-based capillary columns (Chirasil-Dex, BGB-172 and BGB-176SE) have been tested as first-dimension columns. Three non-enantioselective stationary phases (HT-8, BPX-50 and Supelcowax-10) were combined with the enantioselective columns to allow the unambiguous determination of the enantiomers of the target chiral PCBs. Each enantioselective first-dimension column tested was able to separate into enantiomers different PCB congeners, but in all cases, the use of Supelcowax-10 as second-dimension column provided the most satisfactory results. The Chirasil-Dex x Supelcowax-10 column combination allowed the determination of the enantiomeric fraction (EF) of PCBs 84, 91, 95, 132, 136, 149, 174 and 176 in the working standard solution, while that of congener 135 was hindered. The BGB-172 x Supelcowax-10 column set allowed a proper EF determination of congeners 45, 84, 131, 132, 135, 171, 174 and 183, while that of PCB 91 was interfered with co-elutants. The column combination BGB-176SE x Supelcowax-10 allowed the determination of all congeners that this enantioselective stationary phase was able to separate into enantiomers, i.e. PCBs 45, 91, 95, 136, 149 and 176. These column combinations have also been evaluated for the simultaneous determination of the 12 congeners with a toxic equivalency factor assigned by the WHO (PCBs 77, 81, 105, 114, 118, 123, 126, 156, 157, 167, 169, 189) and the seven indicator congeners (PCBs 28, 52, 101, 118, 138, 153 and 180), and evaluated for the analysis of food samples.     

Some Comments on the Matter Wave-light Wave Hypothesis

From the de Broglie matter wave hypothesis and Planck’s energy quantization law, and assuming conservation of energy in the absorption of a photon and its consequent conversion to kinetic energy of motion by a material particle initially at rest, one can deduce a simple mathematical relationship between the wavelength λ (or frequency ν), of the photon absorbed by the particle at rest, and the resulting de Broglie matter wave length, λ_D, of the particle with kinetic energy of motion of mv²/2. The relationship so deduced, λ_D∝√λ, suggests that visible wavelengths of light, from about 4000 ?, in the violet, to beyond about 7000 ?, in the red, on absorption by an electron at rest, lead to material electron wavelengths, λ_D, of the order of the size of the electron transfer proteins seen in the photosynthetic reaction centers of photosynthesizing organisms, at about a size of 50–100 ?. In addition to understanding the mechanism of photosynthesis as a material wave mediated phenomenon, further areas of importance of the relations pointed out in this paper are in the design of experiments to gain a deeper understanding of the basic tenets of wave mechanics, and in the use of tunable lasers to probe various properties of material waves, and to precisely control their properties for applications including lithography.     

Information content of data and variables and types of weighting in least-squares regression methods

Algorithms are given for evaluating the relative amount of useful information related to a particular parameter which is carried by individual data points and intervals of the variables. The algorithms provide an efficient means of using the information contained in a set of data. Applications to the optimization of weighting in regression methods are described. Several informational and combined informational-statistical types of weighting are studied as a means of improving the accuracy and precision of the parameters obtained by non-linear regression.