Chemical Approach to the Optimization of Conditions Using HS-SPME/GC–MS for Characterization of Volatile Compounds in Eugenia brasiliensis Fruit

Grumixama (Eugenia brasiliensis Lam.) is a native fruit of the Brazilian Atlantic Forest, belonging to the Myrtaceae family, which designatesthe most significant number of species with food potential. It stands out due to its phytochemical characteristics because of the presence of polyphenols and volatile organic compounds. Volatile compounds are substances released by foods that give off an aroma and influence flavor. Solid-phase microextraction is a technique that allows for low-cost, fast, and solvent-free extraction, has an affinity for numerous analytes, and is easily coupled to gas chromatography. The objectives of this work were to evaluate the efficiency of different fibers of SPME (solid-phase microextraction) in the extraction of volatile organic compounds from grumixama pulp; optimize a method for extraction time, temperature, and sample weight; and to determine the characteristic volatile profile of this fruit. For the extraction of volatile compounds, three fibers of different polarities were used: polar polyacrylate (PA) fibers, divinylbenzene/carboxyne/polydimethylsiloxane (DVB/CAR/PDMS) semipolar fibers, and polydimethylsiloxane/divinylbenzene (PDMS/DVB). Fourteen volatile organic compounds (VOCs) were identified by DVB/CAR/PDMS, six by PA, and seven by PDMS/DVB through solid-phase microextraction in the headspace mode (SPME-HS). Considering the total number of compounds identified, regardless of the fiber used, and the optimization of the method, Eugenia brasiliensis presented sesquiterpene fractions (85.7%, 83.3%, and 85.7% of total VOCs) higher than the monoterpene fractions (14.3%, 16.7%, and 14.3%) for DVB/CAR/PDMS, PA, and PDMS/DVB, respectively in its composition. In addition, it was possible to verify that the fiber DVB/CAR/PDMS presented a better efficiency due to the larger chromatographic area observed when the grumixama pulp was subjected to conditions of 75 °C, 2.0 g, and an adsorption time of 20 min.     

Autocatalytic demetalation of a Zn(salphen) complex provoked by unprotected N-heterocycles

The interaction of Zn(salphen) complex with biologically important structures such as (benz)imidazoles and purine has been studied and revealed in the case of unprotected purine and (benz)imidazole derivatives a demetalated product, whereas for structurally related 1-methyl-(benz)imidazole the formation of 1 : 1 coordination complexes was evidenced by NMR, MS and X-ray crystallography.     

Stereospecific Synthesis of Steroidal 20,16-γ-Carbolactones

Two strategies have been explored for the synthesis of steroidal 20,16-γ-carbolactones from the corresponding 17-ketoandrostane. A highly efficient, stereospecific protocol has been developed for the β-oriented cis-γ-lactone, based on a Michael addition of cyanide to a conjugated ketone. A different approach, involving prior attachment of a 3-carbon side chain on C-17 of a 17-oxo-16β-acetoxy-androstane led to the epimeric, α-oriented lactone.     

Comparative investigation of the cleavage step in the synthesis of model peptide resins: implications for Nalpha-9-fluorenylmethyloxycarbonyl-solid phase peptide synthesis

Based on our studies of the stability of model peptide-resin linkage in acid media, we previously proposed a rule for resin selection and a final cleavage protocol applicable to the Nalpha-tert-butyloxycarbonyl (Boc)-peptide synthesis strategy. We found that incorrect choices resulted in decreases in the final synthesis yield, which is highly dependent on the peptide sequence, of as high as 30%. The present paper continues along this line of research but examines the Nalpha-9-fluorenylmethyloxycarbonyl (Fmoc)-synthesis strategy. The vasoactive peptide angiotensin II (AII, DRVYIHPF) and its [Gly8]-AII analogue were selected as model peptide resins. Variations in parameters such as the type of spacer group (linker) between the peptide backbone and the resin, as well as in the final acid cleavage protocol, were evaluated. The same methodology employed for the Boc strategy was used in order to establish rules for selection of the most appropriate linker-resin conjugate or of the peptide cleavage method, depending on the sequence to be assembled. The results obtained after treatment with four cleavage solutions and with four types of linker groups indicate that, irrespective of the circumstance, it is not possible to achieve complete removal of the peptide chains from the resin. Moreover, the Phe-attaching peptide at the C-terminal yielded far less cleavage (50-60%) than that observed with the Gly-bearing sequences at the same position (70-90%). Lastly, the fastest cleavage occurred with reagent K acid treatment and when the peptide was attached to the Wang resin.     

The carboxylate shift in zinc enzymes: a computational study

Zinc is the second most abundant transition element in biology and the only metal known to be represented in enzymes from each one of the six classes established by the International Union of Biochemistry. The flexible coordination geometry, the fast ligand exchange, the lack of redox activity, and its role as Lewis acid are just some of the features that make zinc an invaluable element in biological catalysis. In this study, we have analyzed the importance in mononuclear Zn enzymes of an interesting mechanistic phenomenon known as carboxylate shift, which is characterized by a change in the coordination mode of a carboxylate group (mono to bidentate or vice versa) with both ligand entrance or exit from the metal coordination sphere. Using B3LYP calculations, we were able to unveil in detail patterns relating the intrinsic characteristics of a given Zn coordination sphere with the existence or not of a carboxylate-shift mechanism and the additional energy stabilization arising from it. In particular, a specific Zn coordination sphere containing a carboxylate ligand (Asp or Glu), a cysteine, and a histidine has been shown to have the most favorable combination of amino acid residues that ensures a fast ligand exchange.     

In vivo study of the inflammatory modulating effects of low-level laser therapy on iNOS expression using bioluminescence imaging

This study was designed to demonstrate that bioluminescence imaging (BLI) can be used as a new tool to evaluate the effects of low-level laser therapy (LLLT) during in vivo inflammatory process. Here, the efficacy of LLLT in modulating inducible nitric oxide synthase (iNOS) expression using different therapeutic wavelengths was determined using transgenic animals with the luciferase gene under control of the iNOS gene expression. Thirty transgenic mice, FVB/N-Tg(iNOS-luc)Xen, were allocated randomly to one of four experimental groups treated with different wavelengths (lambda = 635, 785, 808 and 905 nm) or a control group (nontreated). Inflammation was induced by intra-articular injection of zymosan A in both knee joints. Laser treatment (25 mW cm(-2), 200 s, 5 J cm(-2)) was applied to the knees 15 min after inflammation induction. Measurements of iNOS expression were performed at various times (0, 3, 5, 7, 9 and 24 h) by measuring the bioluminescence signal using a highly sensitive charge-coupled device (CCD) camera. The results showed a significant increase in BLI signal after irradiation with 635 nm laser when compared to the nonirradiated animals and the other LLLT-treated groups, indicating wavelength dependence of LLLT effects on iNOS expression during the inflammatory process, and thus demonstrating an action spectrum of iNOS gene expression following LLLT in vivo that can be detected by BLI. Histological analysis was also performed and demonstrated the presence of fewer inflammatory cells in the synovial joints of mice irradiated with 635 nm compared with nonirradiated knee joints.     

Preparation and Characterization of Graphite‐Epoxy Composite Modified with Zinc Hexacyanoferrate and Their Electrochemical Behaviour in Presence of Substituted Anilines

The growth of zinc hexacyanoferrate (ZnHCF) hybrid film on the surface of graphite‐epoxy composite (GEC) electrodes was demonstrated by cyclic voltammetry. Surface morphology of the hybrid film was investigated by using scanning electron microscopy. The effect of the type of monovalent cations on the redox behaviour of hybrid film was also studied. This effect indicated that the radius of the hydrated cation mainly determines the ion permeability of the film.     

Density functional study on electronic structures and reactivity in methyl‐substituted chelates used in organic light‐emitting diodes

The electronic structure and reactivity trends of a set of tris‐(n‐methyl‐8‐quinolinolato) metal (III) (n = 0, 3, 4, 5; metal = Al⁺³, Ga⁺³) used as electron‐transport layer in organic light‐emitting diodes were studied and compared. All geometries were optimized at B3LYP/6‐31G(d,p) level of theory. The geometries of the ground state (S₀) of unsubstituted molecules AlQ3 and GaQ3 were found to be slightly affected by the methyl group, which is in agreement with previous works. Methyl‐derivatives conserve largely the electronic structures of AlQ3 and GaQ3. The energies of the frontier orbitals highest occupied and lowest unoccupied molecular orbital are raised by the electron‐releasing effect of methyl group. Molecular orbital contribution analysis reveals that the orbital population is essentially the same for both MQ3 and their derivatives. Analyses of the ionization potential and electron affinity showed that MQ3 tend to be better hole‐blockers than methylated analogues and 5Me‐MQ3 have higher hole‐injection capability than the other methyl‐substituted derivatives. The global reactivity analysis showed that the electrophilicity index can be an indicator of electron‐injection capability in these complexes. Local reactivity analysis showed that atomic sites that are prone to nucleophilic/electrophilic attack are atoms C‐4 in L3/C‐5 in L1. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

A crystalline sponge based on dispersive forces suitable for X-ray structure determination of included molecular guests

A crystalline porous material showing one-dimensional (1-D) rectangular micropores (12 × 9 Ų) has been assembled from a semirigid macrocyclic tetraimine and EtOAc as the templating agent. The 1-D nature of the material is intrinsic to the conformationally rigid structure of a macrocyclic sub-unit bearing four cyclohexylidene residues. The multiple dispersive forces established among the aliphatic residues glutted the 1-D channels and provided thermal stability to the material at temperatures below 160 °C. Upon removal of the template, the structure of the empty solid exhibited permanent microporosity (S _BET = 342 m² g^–1). Being a true molecular sponge, the channel framework of this material allowed the inclusion of a variety of molecular sample guests without compromising its crystalline nature. Remarkably, this crystalline material enabled the structure determination by X-ray diffraction of the included molecules. Theoretical studies demonstrated the vital role played by the dispersive forces in the overall stabilization of the crystal packing.     

Preparation of polymer-supported gold nanoparticles based on resins containing ionic liquid-like fragments: easy control of size and stability

Crosslinked polymers containing covalently attached functional sites with chemical structures related to those present in ILs and having macroscopic properties very similar to the ones of the corresponding bulk ILs can be advantageously applied to the preparation of gold nanoparticles (AuNPs). The size and morphology of the resulting metal nanoparticles (MNPs) can be easily modulated through a proper combination of the synthetic method used for the generation of the NPs and the structural elements of the polymer. Additionally, the resulting supported AuNPs are demonstrated to be stable for at least eight months with the vials open to the atmosphere. Several synthetic methodologies have been studied, as well as different structural parameters for the functional polymers. Those include the chemical nature (anions and cations) and loading of the ionic liquid-like fragments and the morphology of the polymeric matrix. The results obtained show the potential to prepare supported AuNPs with narrow size distributions and small diameters that can have potential interest for application in different fields.