Polymer crystallization dynamics,as reflected by differential scanning calorimetry. Part 2: Numerical simulations

With the aid of a model for the kinetics of polymer crystallization, as put forward in previous publications, the shape of DSC-curves and their position on the temperature scale were simulated for various conditions of heat transfer in the apparatus. It turns out that the outcome is very dependent on the assumptions made with respect to these heat transfer conditions. For the ideal condition — no temperature differences between sample, pan and furnace — an invariable shape is predicted for the DSC-curves. They only shift to lower temperatures with increasing cooling rates. For more realistic conditions, the curves not only shift but become broader and their maxima decrease. They show a more familiar appearance. These calculations are very involved, however, A simple balance equation is shown to yield equivalent results, if a dimensionless characteristic number like the Nusselt number remains considerably smaller than one. This number contains an effective heat transfer coefficient between sample and furnace which, surprisingly, should not be too high. Apparently, the heat capacity of the pan does not play an important role under these conditions. This is investigated in Appendix II. Appendix I describes the procedure of the numerical simulations.     

Crystallization kinetics of polyamide 6 containing pigments

In terms of the Avrami equation, the effects of selected organic pigments on the kinetic parameters of the isothermal crystallization of coloured polyamide 6 were examined in the temperature range 468–478 K. It was found that B Blue and BB Red are active nucleating agents, which is acribed to their crystalline structure. G Orange slightly accelerates the crystallization of PA 6 at lower temperatures and concentrations, whereas in other conditions its effect is the opposite.The isothermal data were confirmed by the results of non-isothermal crystallization. The degree of supercooling corresponding to the peak of the DSC curve was the measured feature in this case.It was found that B Blue and BB Red reduce the free energy of formation of criticalsize nuclei by 20 and 12%, respectively, which is reflected in the rates of crystallization.

---

Zusammenfassung Mit Hilfe der Avrami Gleichung wurde der Einfluß einiger ausgewählter organischer Pigmente auf die kinetischen Parameter der isothermen Kristallisation gefärbter Polyamide 6 im Temperaturbereich 468–478 K untersucht. B Blue und BB Red erwiesen sich als aktive Keimbilder, was mit Hilfe ihrer kristallinen Struktur erklärt werden kann. Bei niedrigeren Temperaturen und geringeren Konzentrationen wird die Kristallisation von PA 6 durch G Orange leicht beschleunigt, unter anderen Bedingungen kann das Gegenteil beobachtet werden. Die isothermen Daten wurden durch die Ergebnisse bei nichtisothermer Kristallisation bekräftigt. In diesem Falle wurde das dem DSC Peak entsprechende Maß an Unterkühlung untersucht. Es wurde gefunden, daß B Blue und BB Red die freie Energie zur Bildung von Keimen kritischer Größe um 20 bzw. 12% herabsetzen, was sich in den Kristallisationsgeschwindigkeiten widerspiegelt.

---

, -6 468–478 . , , . , . . . , , , 20 12%, .

---

---

This work was supported by the Polish Academy of Science, goal 01.14.     

Copper determination in biological materials by ETAAS using W-Rh permanent modifier

A tungsten-rhodium treatment on the integrated platform of a transversely heated graphite atomiser was used as a permanent chemical modifier for the determination of copper in biological materials by using digested samples as well as slurry sampling in electrothermal atomic absorption spectrometry. The W-Rh permanent modifier was as efficient as Pd+Mg(NO(3))(2) conventional modifier for obtaining good Cu thermal stabilisation in the digested and slurry samples. The permanent W-Rh modifier remained stable by approximately 300 and 250 firings when 20 mul of digested sample and 20 mul of slurry were delivered into the atomiser, respectively. In addition, the permanent modifier increased the tube lifetime up to 1370 and 744 analytical measurements in the digested and slurry samples, respectively. Also, when the W-Rh permanent modifier was employed, there was less variation of the slope of the analytical curves during the total atomiser lifetime, resulting in a decreased need of re-calibration during routine analysis, increasing the sample throughput, and consequently diminishing the variable analytical costs. Detection limits obtained with W-Rh permanent modifier were 0.64 and 0.33 mug g(-1) Cu for digested (dilution factor 100 ml g(-1)) and 1.0% m/v slurries of biological materials, respectively. Results for the determination of copper in the samples were in agreement with those obtained with decomposed sample solutions by using Pd+Mg(NO(3)), since no statistical differences were found after applying the paired t-test at the 95% level.     

Synthesen von Heterocyclen, 85. Mitt.: Über die α-Acyllactonumlagerung von 5-Benzoyl-dehydracetsäure

Zusammenfassung Die vonButt undElvidge aufgefundenen Isomeren, 4-Hydroxy-5-acetyl-6-phenyl-pyron-(2) (1) und 4-Hydroxy-5-ben-zoyl-6-methyl-pyron-(2) (2), ergeben bei der Umsetzung mit POCl₃ und Eisessig 5-Benzoyl-dehydracetsäure (3). Im Gegensatz zur Dehydracetsäure² reagiert 5-Benzoyl-dehydracetsäure (3) in alkohol. HCl zum 2,6-Dimethyl-3-äthoxycarbonyl-5-benzoyl-pyron-(4) (6). Die Struktur dieser Verbindung wird auf chemischem und physikalischem Wege abgeleitet.Mit wäßr. HCl läßt sich3 in 2,6-Dimethyl-5-benzoyl-pyron-(4) (5) umwandeln.

---

The isomeric compounds¹ 4-hydroxy-5-acetyl-6-phenyl-pyron-2 (1) and 4-hydroxy-5-benzoyl-6-methyl-pyron-2 (2) yield 5-benzoyl-dehydroacetic acid (3) if with glacial acetic acid and POCl₃. In contrast to dehydroacetic acid² 5-benzoyl-dehydroacetic acid (3) reacts in ethanolic HCl to 2,6-dimethyl-3-carbethoxy-5-benzoyl-pyron-(4) (6).However, with aquenous HCl3 is converted to 2.6-dimethyl-5-benzoyl-pyron-(4) (5).

     

Capillary electrophoresis-diode array detection--electrospray mass spectrometry for the analysis of selected tropane alkaloids in plant extracts

Capillary zone electrophoresis, coupled to UV and interfaced with electrospray ionization mass spectrometry (ESI-MS), is described for the simultaneous analysis of hyoscyamine and scopolamine. On-line UV detection occurred at 22 cm from the inlet of the capillary and ESI-MS monitoring was performed along the entire length of the capillary (85 cm). An alkaline solution of 40 mM ammonium acetate at pH 8.5 was suitable for the analysis of the alkaloids under consideration. Under the optimized conditions, including CE and ESI-MS parameters, the two alkaloids were resolved within a short time and with very high sensitivity. The differentiation of hyoscyamine and its positional isomer littorine, commonly encountered in plant material, is also presented using up-front collision-induced dissociation. Finally, the developed method was applied to the analysis of these alkaloids in Belladonna leaf extract and in Datura candida x D. aurea hairy root extract.     

A mini transmissionγ-ray Compton polarimeter and measurements of the sign of magnetic moments of radioactive nuclei

A mini transmission-ray Compton polarimeter was developed for the measurement of the sign of magnetic moments of radioactive nuclei with low-temperature nuclear orientation. The signs of the magnetic moments of the following isotopes were determined:¹⁹³Os [=+0.7297(16) _N];^191m Ir [=+6.20(9) _N];¹⁹²Ir [=+1.924(10) _N];¹⁹⁴Ir [=+0.39(1) _N];^195m Pt [=–0.605(15) _N].Dedicated to Prof. Dr. P. Kienle on the occasion of his 60th birthday     

Green and sustainable chemistry in Latin America: Which type of research is going on? And for what?

Green (and sustainable?) frame around ‘Inverted America’ (adapted from Torres García, 1943, Museo Juan Manuel Blanes, Montevideo, CC BY 4.0).

1. Download : Download high-res image (122KB)
2. Download : Download full-size image

     

Thermal behavior of furosemide

Data from theoretical, thermal, and spectroscopic methods were compared in order to map a possible mechanism for the thermal decomposition of furosemide, a diuretic compound, in solid state. TG/DTG curves suggested a two-stage decomposition process. The first product of decomposition is water (m/z = 18), released due to a dimerization resulting in the formation of an amide. Then carbon dioxide (m/z = 44), nitroxide (m/z = 30), and 2-methyl-furanyl ion (m/z = 81) are released in the second stage. The chlorine substituted benzene ring, due to the double bond conjugated system, being the last fraction to decompose. Theoretical calculations presented are in agreement with experimental results.