On the natural convection of nanofluids in diverse shapes of enclosures: an exhaustive review

Journal of Thermal Analysis and Calorimetry - The ultimate goal of the present review paper is to summarize and discuss the findings of the most recently published literature on natural convection...     

Investigation of mixture fluid suspended by hybrid nanoparticles over vertical cylinder by considering shape factor effect

Journal of Thermal Analysis and Calorimetry - In this study, flow of a mixture of water and ethylene glycol (50–50%) with hybrid nanoparticles (MWCNT–Ag) over a vertical stretching...     

Cu-based atom transfer radical polymerization of methyl methacrylate using a novel tridentate ligand with mixed donor atoms

This study is aimed at atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) using a novel catalyst. The bis-(2-dodecylsulfanyl-ethyl)-amine (SNS) tridentate ligand with mixed donor atoms was synthesized in high purity using inexpensive reagents and was reacted with copper(I) bromide to produce the CuBr/SNS catalyst. The catalyst mediated living polymerization of MMA yielding polymers with controlled molecular masses and narrow molecular mass distributions (PDI < 1.25). Also, the kinetic plot exhibited a linear increase of ln([M]₀/[M]) versus time, indicating constant concentration of propagating radicals during the polymerization. The products were characterized by ¹H NMR, ¹³C NMR, FT-IR, UV-VIS, GC and elemental analyses (CHNS) and by GPC.     

Nonlinear Mechanical Response of Polymer Matrix Composites: A Review

Abstract

The present article provides a review on the nonlinear mechanical behavior of polymer matrix composites (PMCs). Initially, essential mechanisms driving the nonlinear response of PMCs under different loading conditions are discussed. Rate-dependence, tension-compression asymmetry, viscous behavior, unloading characteristics, interaction between stress components and effects of environmental factors on mechanical properties are briefly reviewed. This is followed by a review of major approaches and constitutive models for predicting stress–strain behavior of PMCs. Following an increasing degree of complexity, models are categorized into four major classes: nonlinear elasticity models, elastic-plastic models, elastic-plastic-viscous models and Damage-Plasticity models. The vast number of existing models is mainly due to the anisotropy and inhomogeneity of PMCs. In brief, this review focuses on informing the reader of major frameworks, rather than addressing all the models in detail.     

Fundamentals and some applications of photoelectrocatalysis and effective factors on its efficiency: a review

Effluents of a large variety of industries usually contain important quantities of synthetic organic compounds. The discharge of these compounds in the environment causes considerable non-aesthetic pollution and serious health risk factors. Since conventional wastewater treatment plants cannot degrade the majority of these pollutants, powerful methods for the decontamination of dye wastewaters have received increasing attention over the past decade. In this work, fundamentals and main applications of photoelectrocatalysis as one of the most powerful and recent progresses of emerging photoassisted electrochemical treatments with UV irradiation are studied. The effect of various effective factors such as photoanode type, light source and its intensity, pH solution value, type and concentration of supporting electrolyte, type of cathode electrode, to be moving of photoanode or solution, thicknesses of semiconductor film on the electrode surface, and applied potential on the destruction of pollutants is described. Furthermore, various methods used for TiO₂ modification are mentioned. Also, application of photocatalysts except semiconductors is presented for photoelectrocatalytic aims. Finally, application of photoelectrocatalysis in determination of materials as a new method is discussed.     

Numerical study of induction heating in melt growth systems—Frequency selection

A set of 2D finite element numerical simulation of induction heating process for an oxide Czochralski crystal growth system has been made for a range of f=1–100 kHz applied frequency of driving current. It was shown that the frequency selection has a marked effect in all basic induction phenomena, including electromagnetic field distribution, skin depth, coil efficiency, and intensity and structure of heating in the growth setup.     

Nonlinear dynamics of a flexible rotor on tilting pad journal bearings experiencing rub–impact

Nonlinear Dynamics - Rub–impact phenomenon occurring in hydrodynamic journal bearings is one of the main malfunctions in rotating machines and causes undesirable dynamic behavior. In order to...     

Numerical implementation of the QMR algorithm by using discrete stochastic arithmetic

In each step of the quasi-minimal residual (QMR) method which uses a look-ahead variant of the nonsymmetric Lanczos process to generate basis vectors for the Krylov subspaces induced byA, it is necessary to decide whether to construct the Lanczos vectorsv _n +1 andw _n +1 as regular or inner vectors. For a regular step it is necessary thatD _k =W _k ^T V _k is nonsingular. Therefore, in the floating-point arithmetic, the smallest singular value of matrix D_k,σ _min (D _k ), is computed and an inner step is performed ifσ _min (D _k )<∈, where ∈ is a suitably chosen tolerance. In practice it is absolutely impossible to choose correctly the value of the tolerance ∈. The subject of this paper is to show how discrete stochastic arithmetic remedies the problem of this tolerance, as well as the problem of the other tolerances which are needed in the other checks of the QMR method with the estimation of the accuracy of some intermediate results. Numerical examples are used to show the good numerical properties.     

Silver nanoparticles supported on ionic‐tagged magnetic hydroxyapatite as a highly efficient and reusable nanocatalyst for hydrogenation of nitroarenes in water

A novel chemically modified magnetic hydroxyapatite (MHAp) was prepared and used as support and stabilizer for the synthesis of silver nanoparticles. First, 1,4‐diazabicyclo[2.2.2]octane (DABCO) was successfully grafted onto the surface of MHAp, and then silver nanoparticles were homogeneously loaded on mesoporous MHAp‐DABCO (ionic‐tagged MHAp) nanocomposite by in situ chemical reduction of silver nitrate using sodium borohydride. The structure and properties of the resulting MHAp‐DABCO‐Ag nanocomposite were confirmed using various techniques. The catalytic activity of ionic‐tagged MHAp‐Ag nanocatalyst was investigated for the hydrogenation reaction of nitroarenes in aqueous media. The results reveal that the Ag‐containing inorganic–organic nanocomposite is highly efficient for the reduction of a wide range of aromatic nitro compounds under green conditions. The superparamagnetic nature of the nanocatalyst leads to its being readily removed from solution via application of a magnetic field, and it can be easily stored and reused.