Neutron activation analysis of microgram amounts of thorium in uranium ores and process liquors by means of thorium-233

A method is described for neutron activation analysis of thorium by employing thorium-233. Decontamination steps include anion exchange in 12.5 N HCL, precipitation of fluoride, extraction with mesityl oxide and thorium oxalate precipitation. The time spent is less than 1 h; spurious activities in counting samples amount only to 2% and can easily be corrected for. The sensitivity of the method is ca. 0.02 μg of thorium in a neutron flux of 10¹²n/cm²/sec with an irradiation time of 5 min.     

Synthetische Versuche in der Gruppe hypotensiv wirksamer Alkaloide, 13. Mitt.: Synthese vondl-10-Methyldeserpidin,dl-10-Äthoxydeserpidin unddl-10-Methylmercapto-deserpidin

Zusammenfassung Die durch Umsetzung von 5-Methyltryptamin, 5-Äthoxytryptamin und 5-Methylmercapto-tryptamin (I, R=CH₃, OC₂H₅ bzw. SCH₃) mit dem racemischen Aldehyd-Ester II entstandenenSchiffschen Basen wurden durch Natriumborhydrid-Reduktion in Methanol unter gleichzeitiger Cyclisierung und Desacetylierung in die entsprechenden 10-substituiertendl-Methyl-2,3-seco-3-oxodeserpidate (IV) übergeführt. Die bei der Einwirkung von 3,4,5-Trimethoxybenzoylchlorid in Pyridin erhaltenen Ester V wurden weiter mit Phosphoroxychlorid cyclisiert und die Produkte als Perchlorate (VI) mit Zink in sauerer Lösung zu den entsprechenden 10-substituiertendl-Deserpidinen (VII, R=CH₃, OC₂H₅ bzw. SCH₃) reduziert. Mit Hilfe der Chromatographie gelang es in zwei Fällen, aus den Rohprodukten auch die entsprechendendl-3-Isodeserpidine (VIII, R=CH₃ bzw. OC₂H₅) zu isolieren. Zum Unterscheiden der Produkte der normalen Reihe (VII) und der 3-Iso-Reihe (VIII) wurden IR-Spektren und die Papierchromatographie angewendet.Mit 2 Abbildungen     

On-line filtration system for determining total chromium and chromium in the soluble fraction of industrial effluents by flow injection flame atomic absorption spectrometry

Two manifolds were assessed for the purpose of determining both the total chromium content and that present as a soluble form in industrial effluents by flow injection flame atomic absorption spectrometry (FI-FAAS). To determine the chromium content in the soluble fraction the samples were used without additional treatment, a 0.45 microm filter being included in the FI system. To determine the total chromium content, the samples were acidified with nitric acid 20% (v/v) and heated for 30 s in a microwave oven (temperatures of about 70 degrees C were reached). The problem posed by the very different concentration range in which total and soluble chromium are present was overcome by using programmed flow rate methodology and by only partially emptying the sample loop. A personal computer controlled both the rotation speed of a peristaltic pump and the volume of sample injected into the system, thus obtaining the dispersion degree required. Using the manifold proposed, the chromium content in the soluble fraction can be determined in the 0.5-20 microg mL(-1) range using a 10 microg mL(-1) single standard for calibration. To determine the total chromium content, a calibration line in the 20-200 microg mL(-1) range was obtained using a single 50 microg mL(-1) chromium standard solution. The reliability of the semi-automatic devices was verified by comparing the results obtained with those found by treating the samples and using both FAAS in a conventional way and a spectrophotometric method using diphenylcarbazide at the 95% confidence level (ANOVA test). The proposed procedures showed a RSD lower than +/-3%.     

Electrodeposition of cobalt on stainless steel foils. Preparation of57Co sources for Mössbauer experiments

Conditions for the electrodeposition of⁵⁹Co and⁵⁷Co on stainless steel foils have been studied. A set of electrolytic parameters has been determined to get a reasonably good electrodeposited sample. The⁵⁷Co electrodeposited foil was then introduced in a quartz tube to be annealed in an argon flow. The final product was a 11 Ci Mössbauer source for college experiments which was succesfully tested by obtaining spectra of stainless steel and sodium nitroprusside.     

Effects of genesis and ionizing radiation on the kinetics of reduction of NiO-CeO2 mixed oxides with hydrogen

The reduction of mixed oxides NiO-CeO₂ of various composition with hydrogen was studied at 290–470° by means of thermogravimetry. Some physicochemical properties of the system were also investigated and compared with earlier studied analogous samples of different “origin”. The degree of mutual interaction of the two components, the reduction kinetics and the sensitivity to the different sorts of radiation (gamma-rays, fast neutrons and electrons), applied in different doses, are strongly affected by the “pre-history” and by the composition in both compared series of mixed oxides.     

Determination of iron at ng/ml level by solid phase spectrophotometry after preconcentration on cation exchange filters

A cationic exchanger paper is used to retain analytes in solution and, after drying, to analyze directly by measuring the UV-Vis absorbance of the paper. The method was applied to determination of iron using its known 1,10-phenanthroline complex. Using 100 ml of sample the applicable concentration range was between 1.0 and 10.0 ng/ml with a detection limit of 0.2 ng/ml and a RSD around 2%. The method was applied to determination of iron total in snow, human serum and wine.     

Molecular dynamics simulations of the dinuclear zinc-beta-lactamase from Bacteroides fragilis complexed with imipenem

Herein, we present results from MD simulations of the Michaelis complex formed between the dizinc beta-lactamase from B. fragilis and imipenem. We considered two catalytically important configurations, which differ in the presence or absence of a hydroxide bridge connecting the two zinc ions in the active site. The structural and dynamical effects induced by substrate binding, the specific roles of the conserved residues and the zinc-bound water molecules, the near attack conformers of the Michaelis complex, and so forth, are discussed in detail. The relative stability of the two configurations was estimated from QM linear scaling calculations on the enzyme-substrate complex combined with Poisson-Boltzmann electrostatic calculations and normal mode calculations. Importantly, we find that the two configurations have similar energies, indicating that these two structures could readily be interchanged, thereby facilitating catalysis. The configuration with the hydroxide bound to the two zinc ions is predicted to be the resting form of the enzyme, while the configuration without the bridge is the reactive form that was found to place the hydroxide in position to attack the carbonyl of the beta-lactam ring. Thus, we propose that the enzyme initiates catalysis by converting from the hydroxide bridge form into the configuration that lacks the hydroxide bridge. This interconversion increases the nucleophilicity of the hydroxide ion and exposes it to the beta-lactam carbonyl, which ultimately facilitates nucleophilic attack. The implications of the observed modes of binding, the possible influence of mutating the Lys184 and Asn193 residues on substrate binding, and the reaction mechanism are also discussed in detail.     

Sensitive determination of diquat by a kinetic method using the stopped-flow mixing technique

A simple, sensitive, selective, fast and inexpensive assay for the determination of diquat is proposed. The method is based on the reduction of the herbicide to a strongly fluorescent monocation radical with sodium dithionite. The initial rate of this reaction is directly proportional to the diquat concentration. The stopped-flow mixing technique was used because the kinetic data can be obtained in only 7 s, meaning that the method can be automated. The calibration graph is linear over the range 5-500 ng ml-1 and the precision (RSD) is close to 1.2%. The applicability of the method was demonstrated by determining the herbicide in different kinds of samples.     

A Study of the Hydration of Lime-Pozzolan Binders

DTA/TG and TG/DTG thermal studies and XRD investigations were carried out on pastes of lime-pozzolan binders to examine the relative hydration process. The binders were prepared with two natural pozzolans and hydrated lime, mixed together in different proportions. The main hydrated phases formed in the pastes are calcium silicate hydrate (CSH) and mono-carboaluminate. The growth of CSH was greater for the paste of the pozzolan richer in reactive constituents. For pastes with a higher lime/pozzolan ratio, a slowing of the formation of CSH was observed, while the formation of monocarboaluminate was more intense. The calcium hydroxide contents of the pastes obtained by thermogravimetric analysis made it possible to determine the pozzolanic activities of the two pozzolans under examination. The mortars for the various lime-pozzolan binders displayed characteristic hardening. This revised version was published online in July 2006 with corrections to the Cover Date.     

On-line preconcentration of inorganic mercury and methylmercury in sea-water by sorbent-extraction and total mercury determination by cold vapour atomic absorption spectrometry

A comparative study of three mercury chelate forming reagents [diethyldithiocarbamate, pyrrolidin-1-yldithioformate and diphenylthiocarbazone (dithizone)] has been carried out for the preconcentration of ultratrace amounts of inorganic mercury and methylmercury in silica C(18) minicolumns as the solid sorbent. Sample flow injection in-line sorbent extraction was coupled with continuous cold vapour atomic absorption spectrometry (CVAAS) for detection. Results showed the superiority of the carbamate type reagents over the dithizone for the on-line formation and preconcentration of the corresponding mercury chelates. Using diethyldithiocarbamate (DDC) as reagent, aqueous sample volumes of 100 ml can be preconcentrated with 100% efficiency for both inorganic mercury and methylmercury. Quantitative release of the retained DDC chelates was obtained for volumes of eluent (ethanol) of 50 microl. Following the proposed procedure, detection limits of 16 ng/l. of mercury were achieved for sample volumes of 25 ml. The relative standard deviation was +/- 3.4% at 0.5 microg/l. Hg(II) levels. The method has been successfully applied to the determination of low levels of mercury in sea-water.