Thermally Activated Delayed Fluorescence in a Y3N@C80 Endohedral Fullerene: Time‐Resolved Luminescence and EPR Studies

The endohedral fullerene Y₃N@C₈₀ exhibits luminescence with reasonable quantum yield and extraordinary long lifetime. By variable‐temperature steady‐state and time‐resolved luminescence spectroscopy, it is demonstrated that above 60 K the Y₃N@C₈₀ exhibits thermally activated delayed fluorescence with maximum emission at 120 K and a negligible prompt fluorescence. Below 60 K, a phosphorescence with a lifetime of 192±1 ms is observed. Spin distribution and dynamics in the triplet excited state is investigated with X‐ and W‐band EPR and ENDOR spectroscopies and DFT computations. Finally, electroluminescence of the Y₃N@C₈₀/PFO film is demonstrated opening the possibility for red‐emitting fullerene‐based organic light‐emitting diodes (OLEDs).     

Development toward a double focusing isotopic separator for noble gas isotope enrichment

A double focusing sector field mass filter used in Nier–Johnson geometry has been built in order to perform Kr isotope enrichment for ⁸¹Kr and ⁸⁵Kr isotopes. The principle consists in implanting Kr⁺ ions accelerated at 7 keV in Al foils after separation using the magnetic sector. A specific ion source has been designed capable of generating high Kr⁺ ion beams (>0.5 μA) to transfer into the collecting Al foils in 3 to 5 h significant fractions of large Kr samples (10¹⁵ to 10¹⁶ atoms) initially introduced in the instrument. Implanted Kr isotopes can be further selectively released from the Al foil by surface ablation using an infrared laser beam. Implantation yields and enrichment factors are measured using a conventional mass spectrometer. Copyright © 2016 John Wiley & Sons, Ltd.     

Identification tree based on fragmentation rules for structure elucidation of organophosphorus esters by electrospray mass spectrometry

Organophosphorus compounds have played important roles as pesticides, chemical warfare agents and extractors of radioactive material. Structural elucidation of phosphonates poses a particular challenge because their initial forms can be hydrolyzed, thus, degradation products may predominate in samples acquired in the field. The analysis of non‐volatile organophosphorus compounds and their degradation products is possible using electrospray tandem mass spectrometry ESI‐MS/MS. Here, we present a generic strategy that allows the unambiguous identification of substituents for two families of organophosphorus compounds: the phosphonates and phosphates. General fragmentation rules were deduced based on the study of decomposition pathways of 55 organophosphorus esters, including examples found in the literature. Multistage MS (MSⁿ) experiments at high resolution in a hybrid mass spectrometer provide accurate mass measurements, whereas collision‐induced dissociation experiments in a triple quadrupole give access to small fragment ions. The creation of a specific nomenclature for each possible structure of organophosphorus compound, depending on the alkyl side chain linked to the oxygen, was achieved by applying these fragmentation rules. This led to the creation of an ‘identification tree’ based upon the unique consecutive decomposition pathways uncovered for each individual compound. Hence, seven structural motifs were created that orient an unequivocal identification using the ‘identification tree’. Despite the similar structures of the ensemble of phosphate and phosphonate esters, distinct identifications based upon characteristic neutral losses and diagnostic fragment ions were possible in all cases. Copyright © 2013 John Wiley & Sons, Ltd.     

Dependence of calibration sensitivity of a polysulfone/Ru(II)-tris(4,7-diphenyl-1,10-phenanthroline)-based oxygen optical sensor on its structural parameters

The optimum performance of an optical oxygen sensor based on polysulfone (PSF)/[Ru(II)-Tris(4,7-diphenyl-1,10-phenanthroline)] octylsulfonate (Ru(dpp)OS) was checked by carefully tuning the parameters affecting the membrane preparation. In particular, membranes having thickness ranging between 0.2 and 8.0 μm with various luminophore concentrations were prepared by dip-coating and tested. The membrane thickness was controlled by tuning the solution viscosity, and was measured both by secondary ion mass spectrometry (SIMS) and by visible spectroscopy (Vis). Luminescence-quenching-based calibration was a single value of the Stern-Volmer constant (K^′SV) for membranes containing up to 20 mmol Ru(dpp) g⁻¹ PSF (1.35 μm average thickness). The K^′SV value decreased for larger concentration. The highest sensitivity was obtained with membrane thickness around 1.6 μm, having a response time close to 1 s. Thicker membranes exhibited an emission saturation effect and were characterized by longer response time. The K^′SV behavior was interpreted on the basis of a mathematical approach accounting for the contribution of luminescence lifetime (τ₀), oxygen diffusion coefficient (DO₂) and oxygen solubility inside the membrane (sO₂) establishing the role of all of them and allowing their experimental determination. Moreover, a simple experimental way to estimate K^′SV without needing calibration was proposed. It was based either on the light emission asymmetry or on the percent variation of light emission on passing from pure nitrogen to pure oxygen.     

Facile synthesis of caerulomycin E by the formation of 2,2′-bipyridine core via a 2-pyridyl substituted 4H-pyran-4-one. Formal synthesis of caerulomycin A

A new approach to caerulomycins A and E via a 6-methyl-2-(2-pyridyl)-4H-pyran-4-one is described. The pyranone precursor is prepared by Claisen condensation of acetylacetone enol ether with ethyl picolinate.     

Charge transport and contact resistance in coplanar devices based on colloidal polyaniline dispersion

The charge transport properties of thin films prepared from colloidal dispersion of polyaniline stabilized by poly(N‐vinylpyrrolidone) (PANI/PVP) have been investigated. The electrical characterization of coplanar device comprising of gold electrodes and PANI/PVP film deposited by spin coating served to gain insights into the contact and bulk resistance. The films prepared from PANI/PVP colloidal dispersion show high stability over a large temperature range. Temperature dependent measurements in the range from 90 to 350 K reveal that the charge transport can be described by a three‐dimensional variable‐range hopping mechanism as the dominant mode in the films. The stability of the films cast from dispersion within a large temperature range opens the possibility of the application as a polymer semiconductor layer in sensors and charge‐transport interlayer in organic solar cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1710–1716     

Calcium Carbonate Polyamorphism and Its Role in Biomineralization: How Many Amorphous Calcium Carbonates Are There?

Although the polymorphism of calcium carbonate is well known, and its polymorphs—calcite, aragonite, and vaterite—have been highly studied in the context of biomineralization, polyamorphism is a much more recently discovered phenomenon, and the existence of more than one amorphous phase of calcium carbonate in biominerals has only very recently been understood. Here we summarize what is known about polyamorphism in calcium carbonate as well as what is understood about the role of amorphous calcium carbonate in biominerals. We show that consideration of the amorphous forms of calcium carbonate within the physical notion of polyamorphism leads to new insights when it comes to the mechanisms by which polymorphic structures can evolve in the first place. This not only has implications for our understanding of biomineralization, but also of the means by which crystallization may be controlled in medical, pharmaceutical, and industrial contexts.