Electromagnetic interference shielding characteristics of fabric complexes coated with conductive polypyrrole and thermally evaporated Ag

Through the chemical coating of polypyrrole (PPy) doped with naphthalene sulfonic acid (NSA) on electrically insulating poly (ethylene terephthalate) (PET) woven fabric, PPy–NSA/PET complexes were synthesized. By using the electrochemical coating of PPy doped anthraquinone-2-sulfonic acid (AQSA) on PPy–NSA/PET complexes, PPy–AQSA/PPy–NSA/PET complexes were synthesized. The silver (Ag) was thermally vacuum evaporated on the surface of PPy–AQSA/PPy–NSA/PET complexes (Ag|PPy–AQSA/PPy–NSA/PET). Electromagnetic interference (EMI) shielding efficiency (SE) and dc conductivity (σ_dc) of fabric complexes were measured for EMI shielding characteristics and theoretical simulation. The measurement of EMI SE in the frequency range from 50 MHz to 1.5 GHz was performed by using ASTM D4935-99 method. The EMI shielding characteristics such as transmittance, reflectance and absorbance were obtained from the S (scattering)-parameter analysis. We control the contribution of the absorbance or the reflectance to total EMI SE through the coating of conductive PPy and the evaporation Ag.     

Simultaneous determination of five coumarins in Angelicae dahuricae Radix by HPLC/UV and LC‐ESI‐MS/MS

Rapid, simple and reliable HPLC/UV and LC‐ESI‐MS/MS methods for the simultaneous determination of five active coumarins of Angelicae dahuricae Radix, byakangelicol (1), oxypeucedanin (2), imperatorin (3), phellopterin (4) and isoimperatorin (5) were developed and validated. The separation condition for HPLC/UV was optimized using a Develosil RPAQUEOUS C₃₀ column using 70% acetonitrile in water as the mobile phase. This HPLC/UV method was successful for providing the baseline separation of the five coumarins with no interfering peaks detected in the 70% ethanol extract of Angelicae dahuricae Radix. The specific determination of the five coumarins was also accomplished by a triple quadrupole tandem mass spectrometer equipped with an electrospray ionization source (LC‐ESI‐MS/MS). Multiple reaction monitoring (MRM) in the positive mode was used to enhance the selectivity of detection. The LC‐ESI‐MS/MS methods were successfully applied for the determination of the five major coumarins in Angelicae dahuricae Radix. These HPLC/UV and LC‐ESI‐MS/MS methods were validated in terms of recovery, linearity, accuracy and precision (intra‐ and inter‐day validation). Taken together, the shorter analysis time involved makes these HPLC/UV and LC‐ESI‐MS/MS methods valuable for the commercial quality control of Angelicae dahuricae Radix extracts and its pharmaceutical preparations. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface functionalization of multi‐walled carbon nanotubes through surface‐initiated atom transfer radical polymerization of glycidyl methacrylate

Herein, we report the fabrication of glycidyl methacrylate (GMA) polymeric conjugates of shortened multi‐walled carbon nanotubes (sMWCNT). The synthesis method involves the attachment of initiator on the surface of nanotubes followed by surface initiated atom transfer radical polymerization (SI‐ATRP) of GMA from the initiator‐bound sMWCNT surface. This is achieved by the procedure consisting of three important steps: introduction of amino groups onto the sMWCNT and attachment of polymerization initiator, 2‐bromo‐2‐methylpropinonyl bromide, and polymerization of GMA. The structure and properties of the resultant polymeric conjugates were characterized by Fourier transform infrared (FT‐IR) spectroscopy, Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X‐ray diffraction (XRD), atomic force microscopy (AFM), transmission electron microscopy (TEM) and SEM. The FT‐IR analysis of polymeric conjugates shows infrared (IR) peaks characteristic of GMA. AFM, TEM and SEM images clearly show the formation of poly(glycidyl methacrylate)(PGMA) polymer on sMWCNT surface. Copyright © 2009 John Wiley & Sons, Ltd.     

HPLC determination of irbesartan in human plasma: its application to pharmacokinetic studies

A simple and rapid HPLC method using fluorescence detection was developed for determination of irbesartan in human plasma. Sample preparation was accomplished through a simple deproteinization procedure with 0.4 mL of acetonitrile containing 800 ng/mL of losartan (internal standard), and to a 0.1 mL plasma sample. Chromatographic separation was performed on a Zorbax Xclipse XDB C₁₈ column (150 × 4.6 mm, i.d., 5 µm) at 40°C. An isocratic mobile phase, acetonitrile:0.1% formic acid (37:63, v/v), was run at a flow‐rate of 1.0 mL/min, and the column eluent was monitored using a fluorescence detector set at excitation and emission wavelengths of 250 and 370 nm, respectively. The retention times of irbesartan and losartan were 4.4 and 5.9 min, respectively. This assay was linear over a concentration range of 10–5000 ng/mL with a lower limit of quantification of 10 ng/mL. The coefficient of variation for this assay precision was less than 8.48%, and the accuracy exceeded 94.4%. The mean relative recoveries of irbesartan and losartan were 98.4 and 99.1%, respectively. This method was successfully applied for pharmacokinetic study after oral administration of irbesartan (300 mg) to 23 Korean healthy male volunteers. Copyright © 2009 John Wiley & Sons, Ltd.     

Blue luminescence of nanocrystalline PbWO4 phosphor synthesized via a citrate complex route assisted by microwave irradiation

Nanocrystalline PbWO₄ phosphor powders, which have scheelite structure, were successfully synthesized at low temperatures via a modified citrate complex route assisted by microwave irradiation. Crystallization of the PbWO₄ precursor were detected at 400 °C, and entirely completed at 500 °C. Prepared PbWO₄ nanocrystallites showed primarily spherical and disperse morphology. The average crystallite sizes were between 18 and 29 nm, showing an ordinary tendency to increase with temperature. The nanocrytalline PbWO₄ phosphor powders exhibited spread-eagle shape of blue luminescence. Especially the PbWO₄ phosphor powders prepared at 600 °C showed the strongest luminescent intensity, which was due to the higher crystallinity and homogeneous particle morphology.     

A Partially Observable Markov Decision Process with Lagged Information

In actuality, we face lots of uncertainty in the application of a Markov process. In order to reduce such uncertainty, it is indispensable to use additional information concerning the state of the process.Among various kinds of additional information, this paper focuses on how to use uncertain delayed observation in a partially observable Markovian decision process (POMDP). This study develops a basic information structure, adding lagged observations to a general POMDP, and derives a rule for updating the state vector based on the information structure. This POMDP model is solved on the basis of a modified one-pass algorithm. An example is also given.     

Boundary Stabilization of Hyperbolic Hemivariational Inequalities

In this paper, we prove the existence of weak solutions and investigate uniform decay rates of global weak solutions for a hyperbolic hemivariational inequalitiy of dynamic elasticity. This work was supported by the Korea Research Foundation Grant funded by the Korean Government (MOEHRD, Basic Research Promotion Fund) (KRF-2007-355-C00002).     

Atomically flat single terminated oxide substrate surfaces

Scientific interest in atomically controlled layer-by-layer fabrication of transition metal oxide thin films and heterostructures has increased intensely in recent decades for basic physics reasons as well as for technological applications. This trend has to do, in part, with the coming post-Moore era, and functional oxide electronics could be regarded as a viable alternative for the current semiconductor electronics. Furthermore, the interface of transition metal oxides is exposing many new emergent phenomena and is increasingly becoming a playground for testing new ideas in condensed matter physics. To achieve high quality epitaxial thin films and heterostructures of transition metal oxides with atomically controlled interfaces, one critical requirement is the use of atomically flat single terminated oxide substrates since the atomic arrangements and the reaction chemistry of the topmost surface layer of substrates determine the growth and consequent properties of the overlying films. Achieving the atomically flat and chemically single terminated surface state of commercially available substrates, however, requires judicious efforts because the surface of as-received substrates is of chemically mixed nature and also often polar. In this review, we summarize the surface treatment procedures to accomplish atomically flat surfaces with single terminating layer for various metal oxide substrates. We particularly focus on the substrates with lattice constant ranging from 4.00 Å to 3.70 Å, as the lattice constant of most perovskite materials falls into this range. For materials outside the range, one can utilize the substrates to induce compressive or tensile strain on the films and explore new states not available in bulk. The substrates covered in this review, which have been chosen with commercial availability and, most importantly, experimental practicality as a criterion, are KTaO₃, REScO₃ (RE = Rare-earth elements), SrTiO₃, La_0.18Sr_0.82Al_0.59Ta_0.41O₃ (LSAT), NdGaO₃, LaAlO₃, SrLaAlO₄, and YAlO₃. Analyzing all the established procedures, we conclude that atomically flat surfaces with selective A- or B-site single termination would be obtained for most commercially available oxide substrates. We further note that this topmost surface layer selectivity would provide an additional degree of freedom in searching for unforeseen emergent phenomena and functional applications in epitaxial oxide thin films and heterostructures with atomically controlled interfaces.     

Signal-Induced Release of Guests from a Photolatent Metal–Phenolic Supramolecular Cage and Its Hybrid Assemblies

The coordination chemistry of plant polyphenols and metal ions can be used for coating various substrates and for creating modular superstructures. We herein explored this chemistry for the controlled release of guests from mesoporous silica nanoparticles (MSNs). The selective adsorption of tannic acids (TAs) on MSN silica walls opens the MSN mesoporous channels without disturbing mass transport. The channel may be closed by the coordination of TA with Cu^II ions. Upon exposure to light, photolysis of Trojan horse guests (photoacid generators, PAGs) leads to acid generation, which enables the release of payloads by decomposing the outer coordination shell consisting of TA and Cu^II. We also fabricated a modular assembly of MSNs on glass substrates. The photoresponsive release characteristics of the resulting film are similar to those of the individual MSNs. This method is a fast and facile strategy for producing photoresponsive nanocontainers by non-covalent engineering of MSN surfaces that should be suitable for various applications in materials science.