A Robust 3D Cage‐like Ultramicroporous Network Structure with High Gas‐Uptake Capacity

A three‐dimensional (3D) cage‐like organic network (3D‐CON) structure synthesized by the straightforward condensation of building blocks designed with gas adsorption properties is presented. The 3D‐CON can be prepared using an easy but powerful route, which is essential for commercial scale‐up. The resulting fused aromatic 3D‐CON exhibited a high Brunauer–Emmett–Teller (BET) specific surface area of up to 2247 m² g^?1. More importantly, the 3D‐CON displayed outstanding low pressure hydrogen (H₂, 2.64 wt %, 1.0 bar and 77 K), methane (CH₄, 2.4 wt %, 1.0 bar and 273 K), and carbon dioxide (CO₂, 26.7 wt %, 1.0 bar and 273 K) uptake with a high isosteric heat of adsorption (H₂, 8.10 kJ mol^?1; CH₄, 18.72 kJ mol^?1; CO₂, 31.87 kJ mol^?1). These values are among the best reported for organic networks with high thermal stability (ca. 600 °C).     

Catholyte‐Free Electrocatalytic CO2 Reduction to Formate

Electrochemical reduction of carbon dioxide (CO₂) into value‐added chemicals is a promising strategy to reduce CO₂ emission and mitigate climate change. One of the most serious problems in electrocatalytic CO₂ reduction (CO₂R) is the low solubility of CO₂ in an aqueous electrolyte, which significantly limits the cathodic reaction rate. This paper proposes a facile method of catholyte‐free electrocatalytic CO₂ reduction to avoid the solubility limitation using commercial tin nanoparticles as a cathode catalyst. Interestingly, as the reaction temperature rises from 303 K to 363 K, the partial current density (PCD) of formate improves more than two times with 52.9 mA cm^?2, despite the decrease in CO₂ solubility. Furthermore, a significantly high formate concentration of 41.5 g L^?1 is obtained as a one‐path product at 343 K with high PCD (51.7 mA cm^?2) and high Faradaic efficiency (93.3 %) via continuous operation in a full flow cell at a low cell voltage of 2.2 V.     

Superior electro-optical performance in vertically aligned liquid crystal devices based on aluminum oxide films

We achieved vertically aligned (VA) liquid crystals (LCs) on aluminum oxide (Al₂O₃) films deposited via e-beam evaporation using a rubbing treatment. Uniform and vertical LC alignment was achieved and high thermal stability was obtained using these substrates. By analyzing measurements from optical retardations, we confirm that the LC orientation is adjustable using rubbing treatment. The superior electro-optical characteristics of the VA cells based on Al₂O₃ films are measured and compared with those based on polyimide layers, indicating that this approach will allow the fabrication of high-performance, advanced LC displays using a conventional rubbing process.     

Evaluation of headspace-gas chromatography/mass spectrometry for the analysis of benzene in vitamin C drinks; pitfalls of headspace in benzene detection

Recently, there have been reports regarding the presence of benzene in vitamin C drinks. This is caused by sodium benzoate and ascorbic acid (vitamin C), which can react together to induce benzene formation. While the headspace gas chromatography method is well known for the detection of benzene, there could be pitfalls in the process of benzene extraction. This study was performed to check if benzene could be generated under high-temperature incubation conditions. As a result, the amount of benzene detected by headspace-gas chromatography/mass spectrometry (HSGC/MS) was affected by temperature changes. As the temperature of the sample vial was increased, newly generated benzene from the headspace also increased, causing false-positive determination of benzene. Although 80 degrees C is generally accepted for the temperature of headspace sample vials, lower temperatures, such as 40 degrees C, minimize the false-positive identification of benzene. Considering that this minimization allows benzene to be quantified at around 5 ppb, this lower temperature should definitely be considered since benzene, which is formed in sodium benzoate, can appear in vitamin C drinks under certain circumstances. The proposed analysis method of benzene in vitamin C drinks by HSGC/MS at 40 degrees C is an accurate and universal method for the monitoring of benzene without false-positive identification.     

Effect of hydrothermal aging on NOx reduction performance for Sb–V–CeO2/TiO2 catalyst

Research on Chemical Intermediates - Herein, we investigated the NOx reduction performance of Sb–V–CeO2/TiO2 (SbVCT) catalyst subjected to hydrothermal aging, where 6 vol% of H2O was...     

Observation of negative charge trapping and investigation of its physicochemical origin in newly synthesized poly(tetraphenyl)silole siloxane thin films

A new kind of organic-inorganic hybrid polymer, poly(tetraphenyl)silole siloxane, was invented and synthesized for realization of its unique charge trap properties. The organic portions consisting of (tetraphenyl)silole rings were responsible for negative charge trapping, while the Si-O-Si inorganic linkages provided the intrachain energy barrier for controlling electron transport. The polysilole siloxane dielectric thin films were fabricated by spin-coating and curing of the polymers, followed by characterization with spectroscopic ellipsometry (SE), near edge X-ray absorption fine structure spectroscopy (NEXAFS), and photoemission spectroscopy (PES). The abrupt increase in density and decrease in thickness of the thin film at a curing temperature of 100 °C was attributed to a thermodynamically preferred state in the nanoscopic arrangement of the polymer chains; this was due to cofacial π-π interactions in a skewed manner between peripheral phenyl groups of the (tetraphenyl)silole rings of the adjacent polymer chains. Using the NEXAFS spectrum to assess high electron affinity, the LUMO energy level of the dielectric thin film cured at 150 °C was positioned 1 eV above the Fermi energy level (E(F)). The electron trapping of the dielectric thin films was confirmed from the positive flat band shift (ΔV(FB)) in the capacitance-voltage (C-V) measurements performed within the metal-insulator-semiconductor (MIS) device structure, which strongly verified the polymer design concept. From the simple kinetics model of the electron transport, it was proposed that the flat band shift (ΔV(FB)) or trap density of the negative charges (|ρ|) was logarithmically proportional to the decay constant (β) for the electron-tunneling process. When a phenyl group of a silole ring in a polymer chain was inserted into the two available phenyl groups of another silole ring in another polymer chain, the electron transfer between the groups was enhanced, decreasing the trap density of the negative charges (|ρ|). For the thermodynamically preferred state generating the high refractive index, the distance between the two phenyl groups of the adjacent polymer chains was estimated to be in the range of 0.27-0.36 nm.     

Bicontinuous Nanoporous Frameworks: Caged Longevity for Enzymes

The preparation of bicontinuous nanoporous covalent frameworks, which are promising for caging active enzymes, is demonstrated. The frameworks have three‐ dimensionally continuous, hydrophilic pores with widths varying between 5 and 30 nm. Enzymes were infiltrated into the bicontinuous pore by applying a pressured enzyme solution. The new materials and methods allowed the amount of caged proteins to be controlled precisely. The resulting enzyme‐loaded framework films could be recycled many times with nearly no loss of catalytic activity. Entropic trapping of proteins by a bicontinuous pore with the right size distribution is an unprecedented strategy toward facile in vitro utilization of biocatalysts.     

Impurity effects on the laser-induced crystallization of thin amorphous silicon film on glass substrate

Crystallization of 100 nm thick amorphous silicon (a-Si) films deposited on glass substrates was carried out using a dual-green-laser method. Depending on a-Si deposition method, either low-pressure chemical vapor deposition (LPCVD) or plasma-enhanced chemical vapor deposition (PECVD), the density of impurities such as Al, K, and Na within the a-Si thin films significantly varied. For the high impurity case of LPCVD, grains of 200–300 nm in size were obtained, whereas for the PECVD case a maximum grain size of about 4 μm was achieved, satisfying the requirements for applications in commercial TFT devices. These results confirm that for the use of glass substrates in polycrystallization of a-Si, controlling the impurity density during substrate preparation is critical.