Effect of light curing sources on microhardness of different composite resins

This study evaluated the influence of light-curing units (LCUs) on Knoop microhardness (KHN) of different composite resins formulations. Four LCUs, one Quartz-Tungsten-Halogen (QTH) for 20 s, one Argon-Ion-Laser (AL) for 10 s, one Plasma-Arc-Curing (PAC) for 9 s, and one Light-Emitting-Diode (LED) for 20 s, and three composite resins, nanofill and easy cure (Filtek™ Supreme), microhybrid and medium cure (Herculite XRV), and microfill and difficult cure (Heliomolar) were used. Discs (4 × 2 mm²) of each composite resin were divided in 12 Groups and KHN was measured at the top (T) and bottom (B) surfaces. Data were analyzed using two-way ANOVA and Tukey’s test (p < 0.05). Top presented significantly higher KHN than bottom surface for all composite resins and LCUs tested. Statistical significant differences were observed among the LCUs. At the bottom surface QTH and LED presented higher KHN than PAC and LA. However, at the top surface PAC and LA presented similar results than QTH for nanofill and microhybrid composite resins. Different LCUs play an important effect on Knoop microhardness and the composite resin formulations were significant factor on the photosensitivity.     

Influence of crystal field potential on the spectroscopic parameters of SiO2·B2O3·PbO glass doped with Nd2O3

This paper presents the optical characteristics of Nd³⁺ silicate glass (SiO₂-B₂O₃-PbO), synthesized by the fusion method. Two sets of samples were prepared: glass and corresponding glass ceramics. Optical absorption, luminescence, Raman spectroscopy and atomic force microscopy (AFM) measurements were performed in order to determine the structural properties of the systems and the radiative characteristics of Nd³⁺ ions. Near infrared luminescence exhibited typical Nd³⁺ bands. Raman and AFM measurements indicated nanocrystal growth with thermal treatment of the glass ceramics. Judd-Ofelt calculations also confirmed that heat treatment induced structural rearrangement of the samples that was dependent on Nd₂O₃ concentration. This resulted in changes in the optical and physical properties of the samples, including stimulated emission cross section and rigidity.     

Using color histograms and SPA-LDA to classify bacteria

In this work, a new approach is proposed to verify the differentiating characteristics of five bacteria (Escherichia coli, Enterococcus faecalis, Streptococcus salivarius, Streptococcus oralis, and Staphylococcus aureus) by using digital images obtained with a simple webcam and variable selection by the Successive Projections Algorithm associated with Linear Discriminant Analysis (SPA-LDA). In this sense, color histograms in the red–green–blue (RGB), hue-saturation-value (HSV), and grayscale channels and their combinations were used as input data, and statistically evaluated by using different multivariate classifiers (Soft Independent Modeling by Class Analogy (SIMCA), Principal Component Analysis-Linear Discriminant Analysis (PCA-LDA), Partial Least Squares Discriminant Analysis (PLS-DA) and Successive Projections Algorithm-Linear Discriminant Analysis (SPA-LDA)). The bacteria strains were cultivated in a nutritive blood agar base layer for 24 h by following the Brazilian Pharmacopoeia, maintaining the status of cell growth and the nature of nutrient solutions under the same conditions. The best result in classification was obtained by using RGB and SPA-LDA, which reached 94 and 100 % of classification accuracy in the training and test sets, respectively. This result is extremely positive from the viewpoint of routine clinical analyses, because it avoids bacterial identification based on phenotypic identification of the causative organism using Gram staining, culture, and biochemical proofs. Therefore, the proposed method presents inherent advantages, promoting a simpler, faster, and low-cost alternative for bacterial identification. Figure

Summary of the new proposed methodology for bacteria classification by using color histograms and SPA-LDA     

Multiresonance modes in sine–Gordon brane models

In this work, we study the localization of the vector gauge field in two five-dimensional braneworlds generated by scalar fields coupled to gravity. The sine–Gordon like potentials are employed to produce different thick brane setups. A zero mode localized is obtained, and we show the existence of reverberations with the wave solutions indicating a quasi-localized massive mode. More interesting results are achieved when we propose a double sine–Gordon potential to the scalar field. The resulting thick brane shows a more detailed topology with the presence of an internal structure composed by two kinks. The massive spectrum of the gauge field is revalued on this scenario revealing the existence of various resonant modes. Furthermore, we compute the corrections to Coulomb law coming from these massive KK vector modes in these thick scenarios, which is concluded that the dilaton parameter regulates these corrections.     

The electrochemical behavior of core-shell CdSe/CdS magic-sized quantum dots linked to cyclodextrin for studies of the encapsulation of bioactive compounds

Semiconductor nanocrystal quantum dots have been the subject of extensive investigations in different areas of science and technology in the past years. In particular, there are few studies of magic-sized quantum dots (MSQDs), even though they exhibit features such as extremely small size, fluorescence quantum efficiency, molar absorptivity greater than traditional QDs, and highly stable luminescence in HeLa cell cultures, thereby enabling monitoring of biological or chemical processes. The present study investigated the electrochemical behavior of free CdSe/CdS MSQDs using glassy carbon electrode and CdSe/CdS MSQDs immobilized on a gold electrode modified with a self-assembled cyclodextrin monolayer. The MSQDs showed two peaks in aprotic medium. The functionalized film modifier was prepared and characterized by means of cyclic voltammetry and electrochemical impedance spectroscopy using ferricyanide ions as a redox probe. The prepared modified electrode exhibited a stable behavior. The proposed method was successfully applied to encapsulation studies of mangiferin, a natural antioxidant compound, and cyclodextrin associated with the quantum dot, and the response was compared with that of the modified electrode without QD. The fluorescence study revealed that CdSe/CdS quantum dots emit blue light when excited by an optical source of wavelength of 350 nm and a significant increase in fluorescence and absorbance intensity is observed from the core-shell CdSe/CdS MSQDs when quantities of mangiferin are added to the solution containing thiolated cyclodextrin. CdSe/CdS MSQDs are optically and electrochemically sensitive and can be used for the detection and interaction of compounds encapsulated in cyclodextrin.     

Behavior of the Cricopharyngeal Segment During Esophageal Phonation in Laryngectomized Patients

BACKGROUND: After total laryngectomy, the interruption of the upper digestive tube and the section of the cricopharyngeal segment alter the high-pressure zone of the pharyngoesophageal transition, which will not only start to have a digestive function, but also be stimulated to take on the production of voice and speech. The pressure observed in the cricopharyngeal segment seems to act as a critical factor for the development of esophageal sound production, and manometry is the procedure capable of quantifying the pressure observed in this region. OBJECTIVE: The objective of the current study was to assess the upper esophageal sphincter pressure in laryngectomized patients who are either successful or unsuccessful esophageal speakers, both at rest and during esophageal phonation, using manometry. METHODS: Twenty laryngectomized persons aged 32 to 83 years (mean, 44.2 years) were submitted to evaluation by a speech pathologist and divided into two groups, ie, successful esophageal speakers (N=12) and unsuccessful esophageal speakers (N=8), according to a scale validated by Wepman et al (1953). The upper esophageal sphincter (UES) pressure was assessed by manometry both at rest and during the following voice emissions in Portuguese: the vowel "a," the monosyllable "pa," and the sentence "papai papou pipoca." The amplitude, the duration of the pressure wave, and the area under the curve were measured. RESULTS: At rest, the mean UES pressure was 11.83 mm Hg for successful esophageal speakers and 9.92 mm Hg for unsuccessful esophageal speakers, with no significant difference between groups; the mean for the two groups as a whole was 11.06 mm Hg. During the voice and speech sequence tests, no significant difference was observed when the emissions in Portuguese of "a," "pa," and the sentence were analyzed separately. CONCLUSION: As the pressure observed at rest did not differ between the successful esophageal speakers and the unsuccessful esophageal speakers, and the amplitude, the duration of the pressure wave, and the area under the amplitude x duration curve were also equal for both groups, we conclude that the cricopharyngeal segment pressure is not a preponderant factor for the acquisition of esophageal voice and speech.     

The total-chromatic number of some families of snarks

The total-chromatic numberχ_T(G) is the least number of colours needed to colour the vertices and edges of a graph G such that no incident or adjacent elements (vertices or edges) receive the same colour. It is known that the problem of determining the total-chromatic number is NP-hard, and it remains NP-hard even for cubic bipartite graphs. Snarks are simple connected bridgeless cubic graphs that are not 3-edge-colourable. In this paper, we show that the total-chromatic number is 4 for three infinite families of snarks, namely, the Flower Snarks, the Goldberg Snarks, and the Twisted Goldberg Snarks. This result reinforces the conjecture that all snarks have total-chromatic number 4. Moreover, we give recursive procedures to construct a total-colouring that uses 4 colours in each case.     

Determination of major, minor and trace elements in rock samples by laser ablation inductively coupled plasma mass spectrometry: Progress in the utilization of borate glasses as targets

The present work is a continuation of a research study performed at our laboratory aiming at the multielement analysis of rock samples (basalts and shale) by inductively coupled plasma mass spectrometry in combination with laser ablation using borate glasses as analytical targets. Argon, nitrogen-argon mixtures and helium were evaluated as cell gases, the latter confirming its better performance. Different operational parameters of the laser, such as gas flow, energy, focus, scanning speed and sampling frequency were optimized. External calibration was made with standards prepared by fusion of geological reference materials (basalts 688 and BCR-2, obsidian SRM 278, and shale SGR-1) of different mass fractions in the meta-tetra borate matrix. Coefficients of determination (R²) were > 0.99 for 30 elements from o total of 40 determined. Method validation was then performed using additional certified reference materials (BHVO-2, BIR-1, SCo-1) produced as borate targets in a similar way. Accuracies were better than 10% for most of the elements studied and analytical precisions, calculated from the residual standard deviations of calibration curves were, typically, between 6% and 10%. Additionally, the semiquantitative TotalQuant® technique was applied, which gave, within the expected uncertainty for this calibration technique, concordant results when compared to the quantitative external calibration procedure. Both methods were then used for the analysis of marine shale samples, which are of great geological interest in petroleum prospecting.     

The migration of Mn2+ ions in Cd1−xMnxS nanocrystals: Thermal annealing control

This work reports evidence of the induced migration of Mn²⁺ ions in Cd_(1?x)Mn_xS nanocrystals (NCs) by selecting a specific thermal treatment for each sample. The growth and characterization of these magnetic dots were investigated by atomic force microscopy (AFM), optical absorption (OA), and electronic paramagnetic resonance (EPR) techniques. The comparison of experimental and simulated EPR spectra confirms the incorporation of Mn²⁺ ions both in the core and at the dot surface regions. The thermal treatment of a magnetic sample, via selected annealing temperature and/or time, affects the fine and hyperfine interaction constants which modify the shape and the intensity of the EPR transition spectrum. The identification of these changes has allowed tracing the magnetic ion migration from core to surface regions of a dot as well as inferring the local density of the magnetic impurity ions.     

Near infrared reflectance spectrometry classification of cigarettes using the successive projections algorithm for variable selection

This paper proposes a methodology for cigarette classification employing Near Infrared Reflectance spectrometry and variable selection. For this purpose, the Successive Projections Algorithm (SPA) is employed to choose an appropriate subset of wavenumbers for a Linear Discriminant Analysis (LDA) model. The proposed methodology is applied to a set of 210 cigarettes of four different brands. For comparison, Soft Independent Modelling of Class Analogy (SIMCA) is also employed for full-spectrum classification. The resulting SPA-LDA model successfully classified all test samples with respect to their brands using only two wavenumbers (5058 and 4903 cm⁻¹). In contrast, the SIMCA models were not able to achieve 100% of classification accuracy, regardless of the significance level adopted for the F-test. The results obtained in this investigation suggest that the proposed methodology is a promising alternative for assessment of cigarette authenticity.