Influence of the pyridine methyl substituent position on the chemical changes of the NCS groups in the thermal decomposition of coordination compounds of the type Cu(NCS)2L2

The influence of the position of the CH₃ group in picoline and lutidine ligands on the degree of chemical change of the NCS groups in coordination compounds of the type Cu(NCS)₂L₂ (whereL=2-, 3- and 4-picoline, and 2,3-, 2,4-, 2,5-, 2,6-, 3,4- and 3,5-lutidine) is dealt with. The most marked effect of the CH₃ group is found to be exerted in position 4. This effect of the methyl group on the degree of chemical change points to the mutual influence of the ligands in coordination compounds of Cu(II).

---

Zusammenfassung Der Artikel befaßt sich mit dem Einfluß der Lage der CH₃ Gruppe in Pikolinen und Lutidinen als Liganden auf den Grad der chemischen Änderungen der Gruppen NSC in Koordinationsverbindungen des Typs Cu(NCS)₂L₂ (L=2-, 3- und 4-Pikoline, 2,3-, 2,4-, 2,5-, 2,6-, 3,4- und 3,5-Lutidine). Der ausgeprägteste Effekt der CH₃ Gruppe wurde in der Position 4 beobachtet. Dieser Einfluß der Methylgruppe auf das Ausmaß der chemischen Änderungen deutet auch auf die gegenseitige Wirkung der Liganden in Koordinationsverbindungen von Cu(II).

---

Résumé L'article a trait à l'influence de la position du groupe CH₂ dans les picolines et lutidines, en tant que ligands, sur le degré des changements chimiques des groupes SCN dans les composés de coordination du type Cu(SCN)₂L₂ (L=2-, 3 et 4-picoline, 2,3-, 2,4-,2,5-, 2,6-, 3,4- et 3,6-lutidine). L'effet le plus prononcé du groupe CH₃ s'observe en position 4. Cette influence du groupe méthyle sur le degré des changements chimiques indique aussi l'influence mutuelle des ligands dans les composés de coordination du Cu(II).

---

- , , NCS Cu(NCS)₂,L₂, L=2-, 3- 4- , 2.3-, 2.4-, 2.5-, 2.6-, 3.4- 3.5-. , 4. Cu(II).

     

Synthesis of 1,4-polyisoprene support of 2-chloroethylphosphonic acid (ethephon), a stimulating compound for the latex production by the Hevea brasiliensis

2-Chloroethylphosphonic acid (ethephon) is a well known stimulating product used to improve the latex production by the rubber tree (Hevea brasiliensis). Its chemical fixation in side position of 1,4-polyisoprene chains by weak chemical bond was considered in order to prepare new derivatives having prolonged stimulating activity. The synthesis was considered by using a chemical modification procedure according to a two-step process. Firstly, an epoxidized 1,4-polyisoprene intermediate was prepared by partial epoxidation of 1,4-polyisoprene. Secondly, the grafting of 2-chloroethylphosphonic acid was achieved by using the reactivity of the P-OH acidic function (or a P-OSiMe₃ derived from P-OH) of the reagent toward oxirane rings of epoxidized 1,4-polyisoprene. It was noted that grafting yields are improved when the reaction is carried out in bulk or in a non-polar solvent, and more especially in neutral conditions, that is by replacing ethephon with its trimethylsilylated derivatives [monotrimethylsilyl 2-chloroethylphosphonic acid or, more especially, di(trimethysilyl) 2-chloroethylphosphonate]. With this latter, the addition occurs by the intermediate of the P-OSiMe₃ bond, and the formation of 2-oxo-l,3,2-dioxaphospholane structures is highly favored.     

Diverse redox-active molecules bearing O-, S-, or Se-terminated tethers for attachment to silicon in studies of molecular information storage

A molecular approach to information storage employs redox-active molecules tethered to an electroactive surface. Attachment of the molecules to electroactive surfaces requires control over the nature of the tether (linker and surface attachment group). We have synthesized a collection of redox-active molecules bearing different linkers and surface anchor groups in free or protected form (hydroxy, mercapto, S-acetylthio, and Se-acetylseleno) for attachment to surfaces such as silicon, germanium, and gold. The molecules exhibit a number of cationic oxidation states, including one (ferrocene), two [zinc(II)porphyrin], three [cobalt(II)porphyrin], or four (lanthanide triple-decker sandwich compound). Electrochemical studies of monolayers of a variety of the redox-active molecules attached to Si(100) electrodes indicate that molecules exhibit a regular mode of attachment (via a Si-X bond, X = O, S, or Se), relatively homogeneous surface organization, and robust reversible electrochemical behavior. The acetyl protecting group undergoes cleavage during the surface deposition process, enabling attachment to silicon via thio or seleno groups without handling free thiols or selenols.     

Zwei neue pentacyclische dimere des cycloheptatriens

Titanium - catalyzed dimerization of cycloheptatriene affords pentacyclo[7.5.0.0^2,8.0^5,14.0^7,11]tetradeca-3,12-diene, $\text{3}$, and pentacyclo[8.4.0.0^3,7.0^4,14.0^6,11]tetradeca-8,12-diene, $\text{4}$. By heating, $\text{3}$ is converted quantitatively into $\text{4}$.     

Henry's law and diffusion constants of vinyl chloride in poly(vinyl chloride) at high temperature

The Henry's law and diffusion constants of vinyl chloride in poly(vinyl chloride) were determined at temperatures of 24, 90, 120, 150, and 170°C for weight fractions of vinyl chloride between 0.2 × 10^?3 and 0.8 × 10^?3. Above 90°C, Henry's law applies; values of the constant increase with temperature from 1.8 × 10² to 5.5 × 10² atm per unit weight fraction of dissolved vinyl chloride. The heat of desorption is about 15 kJ/mole. At 24°C, the nominal Henry's law constant was smaller than would have been obtained by extrapolating the values found at higher temperature. The diffusion constants increase with temperature from about 2 × 10^?13 to 3 × 10^?7 cm²/sec. The activation energy for diffusion is about 110 kJ/mole between 90 and 170°C. Although all values were determined in the absence of air, it is likely that they apply to polymer in air. They may, therefore, be used to calculate the vinyl chloride content in the gas above poly(vinyl chloride) under specific processing conditions.     

IAEA quality control studies on determining trace elements in bioindicators

Twenty laboratories from 17 countries around the world participated in two analytical quality control exercises, coded NAT-5 and NAT-6, on determining trace and minor elements in plant bioindicator samples. 1398 laboratory mean values for 51 elements were submitted for two lichen and two moss materials. The submitted measurement results were evaluated as interlaboratory comparison (IC) exercises and as proficiency tests (PT) following standard procedures developed by the International Atomic Energy Agency (IAEA). The evaluations confirmed good performance of the participating laboratories for many elements. Furthermore, the laboratories performance based on IC criteria improved from the first exercise to the second one. Subsequent NAT-5 evaluation revealed systematic differences between the analytical values obtained non-destructively or after the total sample dissolution and the measurements following nitric acid sample dissolution (without the use of hydrofluoric acid) for some elements. The most critical elements for this kind of discrepancies appeared to be Al, Ca, Cr, Fe, Na, Ni, and Pb. After changing analytical methodologies in the concerned laboratories, more consistent values for those elements were obtained in NAT-6. This revised version was published online in August 2006 with corrections to the Cover Date.     

Electronic and crystalline structure of Si/SiO2 interface modified by ArF excimer laser

The native oxide layers on Si(100) surface were irradiated under UHV conditions by an ArF excimer laser pulses with energy density varied between melting and evaporating thresholds. The resulting changes were studied by LEED, AES and UPS. The increase of the energy density up to evaporation threshold results in the recrystallisation of native oxide layer. The pulses with energy densities just above the evaporation threshold ablate the top layer leaving an ordered and atomicaly clean surface. The observed (1x1) surface reconstruction is probably stabilised by strains introduced during rapid melting and quenching of the topmost layers. The surface electronic structure is dominated by random satisfaction of dangling bonds swearing a well defined surface states observed on (2x1)Si(100) surface.     

Thermal decomposition of N2H6GeF6 · H2O,isolation and characterization of intermediates

The thermal behaviour of N₂H₆GeF₆ · H₂O was investigated by TG, DTG and DTA measurements. The decomposition proceeded in three steps, in which anhydrous N₂H₆GeF₆ and N₂H₅GeF₅; were isolated and characterized by chemical analysis and vibrational spectroscopy. The X-ray powder photographs of the intermediates were indexed, namely, for N₂H₆GeF₆ on the basis of a monoclinic cell with a = 8.86(9), b = 9.29(2), c =7.40(0) Å, β = 85° and for N₂H₅GeF₅ on the basis of an ortrhorhombic cell with a = 8.43(5),b = 9.19(9), c = 7.43(6) Å.     

Delphinidin–Aluminum(III) Complexes in Aqueous and Non-Aqueous Media: Spectroscopic Characterization and Theoretical Study

Summary. The study of delphinidin complexation with trivalent aluminum in acidic aqueous buffered (pH 3.0 and 3.8) and methanolic solutions was performed utilizing electronic absorption spectroscopy and quantum chemical calculations. In its structure delphinidin possesses several chelating sites in competition towards aluminum(III). Molar ratio plots denoted the formation of only one aluminum(III):delphinidin complex of stoichiometry of 1:1 in both investigated media. Semiempirical calculations, performed at the restricted HF AM1 level, enabled the determination of the structural features of free delphinidin and structural modifications caused by chelation of aluminum(III). Considering the pigment molecular structure and the results of the theoretical calculations it is possible to equally implicate C3′–C4′ and C4′–C5′ hydroxyl groups as those with the predominant chelating power.     

Exchange of halogen bonded on aromatic core. Heterogeneous catalysis—I : Reaction mechanism of iodine exchange in o-iodobenzoic acid

Reaction mechanism of halogen exchange between arylhalogenide and halogenide anion is studied in a case when the aromatic core is inactivated with respect to the S_NAr substitution by other substituents. The exchange of iodine between o-iodobenzoic acid and ¹³¹I labelled NaI serves as a modelling reaction. The reaction was found to proceed heterogeneously on a glass surface. In the case of a rapid course of the surface reaction the reaction mechanism is more complicated and the equation derived by McKay cannot be applied for expressing the time dependence of the degree of isotopic exchange. Reaction mechanism was proposed for this reaction and compared with experimental data.