Electrospun polystyrene nanofibers as a novel adsorbent to transfer an organic phase from an aqueous phase

The aim of this work is to develop a simple phase‐transfer method for dispersive liquid–liquid microextraction. For this purpose, a polystyrene nanofiber was prepared by a facile electrospinning strategy and used for the first time as an adsorbent to transfer the organic phase in dispersive liquid–liquid microextraction procedure. The fiber was characterized and its chemical stability and excellent hydrophobicity enable it to selectively adsorb the organic solvent in an aqueous sample. High porosity and specific surface area provide a large adsorption capacity. Under the optimal conditions, the developed dispersive liquid–liquid microextraction with high‐performance liquid chromatography method was successfully applied to the analysis of aldehydes in environmental water samples. The merits of this approach are that it is easy‐to‐operate, low‐cost, time‐saving, and has satisfactory sensitivity. It provides an alternative way for fast and convenient phase transfer of the hydrophobic organic solvent from the aqueous phase.     

Quantitative and fingerprinting analysis of Atractylodes rhizome based on gas chromatography with flame ionization detection combined with chemometrics

This study assessed the feasibility of gas chromatography with flame ionization detection fingerprinting combined with chemometrics for quality analysis of Atractylodes rhizome. We extracted essential oils from 20 Atractylodes lancea and Atractylodes koreana samples by hydrodistillation. The variation in extraction yields (1.33–4.06%) suggested that contents of the essential oils differed between species. The volatile components (atractylon, atractydin, and atractylenolide I, II, and III) were quantified by gas chromatography with flame ionization detection and confirmed by gas chromatography with mass spectrometry, and the results demonstrated that the number and content of volatile components differed between A. lancea and A. koreana. We then calculated the relative peak areas of common components and similarities of samples by comparing the chromatograms of A. lancea and A. koreana extracts. Also, we employed several chemometric techniques, including similarity analysis, hierarchical clustering analysis, principal component analysis, and partial least‐squares discriminate analysis, to analyze the samples. Results were consistent across analytical methods and showed that samples could be separated according to species. Five volatile components in the essential oils were quantified to further validate the results of the multivariate statistical analysis. The method is simple, stable, accurate, and reproducible. Our results provide a foundation for quality control analysis of A. lancea and A. koreana.     

Precise Formation of a Hollow Carbon Nitride Structure with a Janus Surface To Promote Water Splitting by Photoredox Catalysis

The precise modification of redox species on the inner and outer surfaces of hollow nanostructures is relevant in catalysis, surface science, and nanotechnology, but has proven difficult to achieve. Herein, we develop a facile approach to specifically fabricate Pt and Co₃O₄ nanoparticles (NPs) onto the interior and exterior surface of hollow carbon nitride spheres (HCNS), respectively, to promote the surface redox functions of the polymer semiconductors. The photocatalytic water splitting activities of HCNS with spatially separated oxidation and reduction centers at their nanodomains were enhanced. The origin of the enhanced activity was attributed to the spatially separated reactive sites for the evolution of H₂ and O₂ and also to the unidirectional migration of the electron and hole on the Janus surfaces, thereby preventing the unwanted reverse reaction of water splitting and decreasing charge recombination.     

Chemical composition,in vitro antioxidant activity and α-glucosidase inhibitory effects of the essential oil and methanolic extract of Elsholtzia densa Benth.

Elsholtzia densa Benth. is a traditional aromatic herb used in the pharmaceutical and flavouring industries. To analyse and compare the chemical composition, the oils and nonvolatile compounds in E. densa and Mosla chinensis Maxim. were extracted via hydrodistillation, solvent extraction or ultrasound-assisted extraction. Seventy-three volatile compounds in the volatile oil (0.35 ± 0.06%) obtained by E. densa via hydrodistillation were investigated by gas chromatography–mass spectrometer and compared based on different parameters. Also, the antioxidant activity and α-glucosidase inhibitory effects of the five sub-fractions of the methanolic extract were studied and the ethyl acetate sub-fraction (EC₅₀ = 7.9 μg/mL) and petroleum ether sub-fraction (EC₅₀ = 0.0955 mg/mL) showed the strongest activity, respectively. This study has provided a scientific basis for scientific collection, effective development, use of E. densa Benth., and suggested that it can be used as a potential source of antioxidants in food and a potential candidate for the management of type 2 diabetes mellitus.     

微波消解-石墨炉原子吸收光谱法分析测定食用菌中总砷

摘 要：采用微波消解-石墨炉原子吸收光谱法分析测定食用菌中总砷。取可食部分的食用菌粉碎均匀,采用微波消解对样品进行消解,将消解液于140℃赶酸至0.5mL ,用超纯水转移定容至25mL。以0.1%的硝酸钯为基体改进剂,塞曼扣背景,用石墨炉原子吸收光谱法测定总砷。方法检出限为0.4μg/L,线性范围为0~30 μg/L,线性相关系数(r)大于0.998,采用精密度考察方法重现性,不同浓度水平的RSD%均小于6.6%;三个浓度水平的加标回收率为80.6% ~ 103.9%,有证标准物质测定结果符合要求。实验结果表明,方法操作简便、灵敏、准确,适合食用菌中总砷的测定。对砷形态复杂的野生食用菌,微波消解后可直接采用石墨炉原子吸收光谱法测定总砷。     

Excellent dielectric and actuated strain properties in CCTOx@BT(1−x)@KH560/NR system via a tunable BaTiO3 interfacial buffer layer

Dielectric elastomers (DEs) require high drive voltages to obtain large actuated strain, which limits their application in the biological field. In this work, we enhanced the dielectric properties of natural rubber (NR) composites by using core–shell structured (CaCu₃Ti₄O₁₂)_x@(BaTiO₃)_(1−x) (CCTO_x@BT_(1−x)) high-dielectric particles with an buffer layer, and adjusted the thickness of the BT buffer layer by adjusting the addition of titanate during the preparation process, and then observed the relationship between the dielectric properties of NR composites and the thickness of the BT buffer layer. In addition, we modified the CCTO_0.75@BT_0.25 fillers surface with silane coupling agent KH560 to enhance the interfacial interaction between the inorganic fillers and polymeric matrix to obtain better dispersion and greater dielectric properties. As a result of the optimization of the CCTO_0.75@BT_0.25@KH560 structure, the actuated strain performance is greatly improved. The actuated strain of 5 per hundred rubber (phr) CCTO_0.75@BT_0.25@KH560/NR is 16.3% at 74.03 kV/mm, which is 6.52 times higher than the actuated strain obtained by NR (2.5%) at 50.28 kV/mm. This work presents a method to optimize the structure of core–shell fillers by modulating the buffer layer, and provides a new idea for further preparation of dielectric elastomer materials with large actuated strain at low voltage.     

Highly Dispersed and Small‐Sized Nickel(II) Hydroxide Co‐Catalyst Prepared by Photodeposition for Hydrogen Production

Photodeposition has been widely used as a mild and efficient synthetic method to deposit co‐catalysts. It is also worth studying how to synthesize non‐noble metal photocatalysts with uniform dispersion. Different synthetic conditions in photodeposition have a certain influence on particle size distribution and photocatalytic activity. Therefore, we designed experiments to prepare the inexpensive composite photocatalyst Ni(OH)₂/g‐C₃N₄ by photodeposition. The Ni(OH)₂ co‐catalysts disperse uniformly with particle sizes of about 10 nm. The photocatalytic hydrogen production rate of Ni(OH)₂/g‐C₃N₄ reached about 19 mmol g^?1 h^?1, with the Ni(OH)₂ deposition amount about 1.57 %. During 16 h stability testing, the rate of hydrogen production did not decrease significantly. The composite catalyst also revealed a good hydrogen production performance under sunlight. The Ni(OH)₂ co‐catalyst enhanced the separation ability of photogenerated carriers, which was proved by surface photovoltage and fluorescence analysis.     

Facile Route to Enzyme Immobilization: Gloucose Oxidase Entrapped in Titania Under Mild Environmental Conditions and Consequent Electrochemical Sensor Response

A facile one-step method to the immobilization of the combination of glucose oxidase(GOD) and catalase(CAT) in mesostructured TiO₂ was proposed. The results obtained by transmission electron microspectroscopy and nitrogen adsorption-desorption analysis clearly show that the TiO₂ mediated by the combination of GOD and CAT(CGC) has a large surface area and a narrow pore-size distribution. The CGC immobilized on mesostructured TiO₂ exhibits direct electrochemistry and good electrocatalytic performance without any electron mediator.     

Preparation of nanocrystalline Sn-TiO2−X via a rapid and simple stannous chemical reducing route

The Sn-TiO_2−X nanoparticles have been prepared via a rapid and simple stannous chemical reducing method. The as-prepared Sn-TiO_2−X nanoparticles were investigated by means of surface photovoltage spectroscopy (SPS), XPS, and DRS technology as well as photocatalytic degradation of RhB were studied under illumination. The experiment results revealed that the reduction of the TiO₂ particles raised their Fermi level, which can enhance the driven force of photoinduced electrons transferring from TiO₂ to adsorbed O₂ and SnO₂ on the surface of TiO₂. On the other hand, the amount of oxygen vacancies of the Sn-TiO_2−X increased after the stannous chemical reduction. The oxygen vacancies can also effectively inhibit the recombination of photoinduced electrons and holes pairs. These factors are favorable to the photocatalytic reaction.     

Abnormal blueshift of UV emission in single-crystalline ZnO nanowires

Single-crystalline ZnO nanowires (NWs) were synthesized by a facile vapor transport method. The good orientation and high crystal quality were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and high-resolution transmission electron microscope (HRTEM) measurements. Excitation-power-dependence photoluminescence spectra of ZnO NWs show that the UV emission displayed an evident blueshift with increasing excitation power and the corresponding energy shift might be as large as 10 meV. This anomalous phenomenon correlates to the band bending level caused by the surface built-in electric field due to the existence of substantial oxygen vacancies. By increasing the excitation power, the enhanced neutralization effect near the surface will reduce the built-in electric field and lead to a reduction of band bending which triggers the blueshift of the UV emission.