Si／SiNx／SiO2多层膜的光致发光

采用射频磁控溅射法,制备了具有强光致可见发光的纳米Si/SiNx/SiO2多层膜,利用傅立叶红外吸收(FTIR)谱,光致发光(PL)谱对其进行了研究。用260nm光激发得到的PL谱中观察到高强度的392nm(3.2eV)和670nm(1.9eV)光致发光峰,分析认为它们分别来自于缺陷态≡Si-到价带顶和从导带底到缺陷态≡Si-的辐射跃迁而产生的光致激发辐射复合发光。PL谱中只有370nm(3.4eV)处发光峰的峰位会受退火温度的影响,结合FTIR谱认为370nm发光与低价氧化物—SiOx(x<2.0)结合体有密不可分的关系。当SiO2层的厚度增大时,发光强度有所增强,800℃退火后出现最强发光,认为具有较大SiO2层厚度的Si/SiNx/SiO2结构多层膜更有利于退火后形成Si—N网络,能够得到更高效的光致发光。用量子限制-发光中心(QCLC)模型解释了可能的发光机制,并建立了发光的能隙态(EGS)模型。     

视频法分析RC串联电路暂态过程

RC串联电路暂态充放电过程中,用手机拍摄并接在电容两端的数字电压表的变化过程。使用视频软件单帧播放功能记录瞬时电压随时间变化关系,绘制RC串联电路暂态过程的充放电曲线从而获得暂态过程的时间常数。     

Unified fission model for proton emission

The unified fission model (UFM) combining with the phenomenological assault frequency has been carried out to investigate the proton-radioactivity half-lives of spherical proton emitters. The results are in good agreement with the experimental data and other theoretical values, and newly observed spherical proton emitters have been analyzed. Finally, the effect of angular momentum transfer on half-life of proton emission has been discussed in detail and a formula can be used to describe this relationship.     

基于Bragg光纤光栅传感器的监测系统设计

设计了基于Bragg光纤光栅传感技术的监测系统,当光纤光栅所处环境的温度、应力、应变或其他物理量发生变化时,光栅的周期或纤芯折射率将发生变化,从而使反射光的波长发生变化,通过测量反射光中心波长的变化,就可以获得待测物理量的变化情况.该系统利用薄膜滤波器完成对外界的分布式测量,采用光强度检测,能够实现无缝监测.     

RESEARCH OF STEPPING PRESSURE AND CONTROL OF NEAR FIELD ROOF OF TASHAN COAL MINE BASED ON NUMERICAL SIMULATION1)

煤层坚硬顶板采用水力压裂技术进行定向弱化可有效控制来压步距,降低事故风险。基于黏聚力模型,利用有限元二次开发建立了压裂前后煤层开采数值计算模型,模拟分析了顶板垮落规律及影响因素,优化裂缝间距设计。结果表明：来压跨距与顶板厚度、强度呈正相关性,与埋深呈负相关性。预制裂缝在拉应力集中区可促进起裂扩展,应全面勘测各岩层位地质参数,利用计算出的应力集中区位置设计裂缝间距,实现经济有效地控制来压步距。     

An analytic model for transient heat conduction in bi-layered structures with flexible serpentine heaters

Uniform heating of complex surfaces, especially non-developable surfaces, is a crucial problem that traditional rigid heaters cannot solve. Inspired by flexible electronic devices, a novel design for the stretchable heating film is proposed with the flexible serpentine wire embedded in the soft polymer film, which can be attached to non-developable surfaces conformally. It provides a new way for the stretchable heaters to realize uniform heating of complex surfaces. However, the thermal field of flexible serpentine heaters(FSHs) depends on the configurations of the embedded serpentine heating wire, which requires accurate theoretical prediction of real-time temperature distribution. Therefore,the analytical model for the transient heat conduction in FSHs is solved by the separation of variables method and validated by the finite element analysis(FEA) in this paper. Based on this model, the effects of the geometric parameters, such as the radius and the length of the serpentine heaters, on the thermal uniformity are systematically investigated. This study can help to design and fabricate flexible heaters with uniform heating in the future.     

疏水介孔SiO2的制备与性能表征

以廉价的工业级正硅酸乙酯为原料,经过酸碱两步催化制备二氧化硅凝胶,以三甲基氯硅烷/六甲基二硅氧烷混合液对凝胶进行直接表面改性,常压干燥下得到高比表面积疏水性二氧化硅气凝胶.用SEM、IR、N2吸脱附、TG-DTA、接触角的测定等分析方法对二氧化硅化学成分、结构形貌、比表面积、热稳定性和疏水性能进行了研究.结果表明,经改...     

投影壳模型研究丰中子奇奇核102,104Nb的转动能谱

运用投影壳模型研究了正常形变丰中子核同位素102,104Nb的低能级能谱, 并指定了它的准粒子组态, 理论计算所得到的能谱曲线与实验给出的能谱曲线非常一致, 说明了投影壳模型对研究重核低能级谱非常有效。 The Projected Shell Model(PSM) is used to study the low energy scheme of the neutron rich normal deformed isotopes of odd odd nuclei 102, 104Nb. The quasiparticle configuration is assigned. The theoretical calculations of the energy band of 102,104Nb could well reproduce the experimental data. It is shown that PSM is a valid method for studying the low energy scheme of heavy nuclei.     

简支圆板的非轴对称热弯曲

由于热弹性耦合问题的复杂性, 能得到解析解的主要是轴对称问题和比较简单的问题.利用Green函数, 根据双调和方程边值问题的边界积分公式和自然边界积分方程.在简支板的非轴对称问题的基础上,利用傅立叶级数及卷积的几个公式,求得了非轴对称变温边界条件下圆板的弯曲解,有较好的收敛速度和计算精度,计算过程相对简单.算例表明了方法的有效性.