Palladium catalysed alkyne hydrogenation and oligomerisation: a parahydrogen based NMR investigation

The role phosphine ligands play in the palladium(ii)-bis-phosphine-hydride cation catalysed hydrogenation of diphenylacetylene is explored through a PHIP (parahydrogen induced polarization) NMR study. The precursors Pd(LL')(OTf)(2) () [LL' = dcpe (PCy(2)CH(2)CH(2)PCy(2)), dppe, dppm, dppp, cppe (PCy(2)CH(2)CH(2)PPh(2))] are used. Alkyl palladium intermediates of the type [Pd(LL')(CHPhCH(2)Ph)](OTf) ( and ) are detected and demonstrated to play an active role in hydrogenation catalysis. Magnetization transfer experiments reveal chemical exchange from the alpha-H of the alkyl ligand of (LL' = dcpe) and linkage isomer ' (LL' = cppe) into trans-stilbene on the NMR timescale. Activation parameters (DeltaH( not equal) and DeltaS( not equal)) for this transformation have been determined. These experiments, coupled with GC/MS data, indicate that the catalytic activity is greater in methanol, where it follows the order: dcpe > cppe > dppp > dppe > dppm, than in CD(2)Cl(2). All five of the phosphine systems described are less active than those based on bcope [where bcope is (C(8)H(14))PCH(2)-CH(2)P(C(8)H(14))] and (t)bucope [where (t)bucope is (C(8)H(14))PC(6)H(4)CH(2)P((t)Bu)(2)]. cis, cis-1,2,3,4-Tetraphenyl-buta-1,3-diene is detected as a minor reaction product with Pd(LL')(PhCH-CHPh-CPh[double bond, length as m-dash]CHPh)(+) () also being shown to play a role in the alkyne dimerisation step.     

On the origins of sudden adhesion loss at a critical relative humidity: examination of bulk and interfacial contributions

The origins for abrupt adhesion loss at a critical relative humidity (RH) for polymeric adhesives bonded to inorganic surfaces have been explored using a model poly(methyl methacrylate) (PMMA) film on glass. The interfacial and bulk water concentrations within the polymer film as a function of D 2O partial pressure were quantified using neutron reflectivity. Adhesion strength of these PMMA/SiO 2 interfaces under the same conditions was quantified using a shaft loaded blister test. A drop in adhesion strength was observed at a critical RH, and at this same RH, a discontinuity in the bulk moisture concentration occurred. The moisture concentration near the interface was higher than that in the bulk PMMA, and at the critical RH, the breadth of the interfacial water concentration distribution as a function of distance from the SiO 2/PMMA interface increased dramatically. We propose a mechanism for loss of adhesion at a critical RH based upon the interplay between bulk swelling induced stress and weakening of the interfacial bond by moisture accumulation at the PMMA/SiO 2 interface.     

Efficient recycling of a chiral palladium catalytic system for asymmetric allylic substitutions in ionic liquid

Chiral carbohydrate-based diphosphites were used for Pd-catalysed asymmetric allylic substitution (alkylation, amination, phosphination) in neat ionic liquids (ILs). Pyrrolidinium-based IL led to the best activities, allowing an efficient catalyst immobilization. In the allylic amination (TOF > 3100 h(-1)), the catalyst could be recycled nine times preserving both activity and enantioselectivity.     

Violet-to-blue tunable emission of aryl-substituted dispirofluorene-indenofluorene isomers by conformationally-controllable intramolecular excimer formation

Two series of DiSpiroFluorene-IndenoFluorene (DSF-IF) positional isomers, namely dispiro[2,7-diarylfluorene-9',6,9',12-indeno[1,2-b]fluorenes], (1,2-b)-DSF-IFs 1 and dispiro[2,7-diarylfluorene-9',6,9',12-indeno[2,1-a]fluorenes], (2,1-a)-DSF-IFs 2 have been synthesized. These violet-to-blue fluorescent emitters possess a 3π-2spiro architecture, which combines via two spiro links two different indenofluorene cores, that is, (1,2-b)-IF or (2,1-a)-IF and 2,7-substituted-diaryl-fluorene units. Due to their different geometric profiles, the two families of positional isomers present drastically different properties. The marked difference observed between the properties of (1,2-b)-DSF-IF (1) and (2,1-a)-DSF-IF (2) is discussed in terms of intramolecular π-π interactions occurring in (2,1-a)-DSF-IF (2) leading to conformationally-controllable intramolecular excimer formation. Indeed, the original geometry of the (2,1-a)-DSF-IF (2) family, with face-to-face "aryl-fluorene-aryl" moieties, leads to remarkable excimer emission through intramolecular π-π interactions in the excited state. Furthermore, the emission wavelengths can be gradually modulated by the control of the steric hindrance between the adjacent substituted phenyl rings. Thus, through a comparative and detailed study of the (1)H NMR, electrochemical and photophysical properties of DSF-IFs 1 and 2, we have evidenced the intramolecular π-π interactions occurring between the two "aryl-fluorene-aryl" moieties in the ground state and in the excited state. These properties have been finally correlated to the spectacular conformational change modeled by density functional theory (DFT) calculations. Indeed, the two "aryl-fluorene-aryl" moieties switch from a staggered conformation in the ground state to an eclipsed conformation in the first excited state.     

Influence of micromixer characteristics on polydispersity index of block copolymers synthesized in continuous flow microreactors

The influence of interdigital multilamination micromixer characteristics on monomer conversions, molecular weights and especially on the polydispersity index of block copolymers synthesized continuously in two microtube reactors is investigated. The micromixers are used to mix, before copolymerization, a polymer solution with different viscosities and the second monomer. Different geometries of micromixer (number of microchannels, characteristic lengths) have been studied. It was found that polydispersity indices of the copolymers follow a linear relationship with the Reynolds number in the micromixer, represented by a form factor. Thus, beside the operating conditions (nature of the first block and comonomer flow rate), the choice of the micromixer geometry and dimension is essential to control the copolymerization in terms of molecular weights and polydispersity indices. This linear correlation allows the prediction of copolymer features. It can also be a new method to optimize existing micromixers or design other geometries so that mixing could be more efficient.     

Noninvasive assessment of hepatic fibrosis in patients with chronic hepatitis C using serum Fourier transform infrared spectroscopy

Assessment of liver fibrosis is of paramount importance to guide the therapeutic strategy in patients with chronic hepatitis C (CHC). In this pilot study, we investigated the potential of serum Fourier transform infrared (FTIR) spectroscopy for differentiating CHC patients with extensive hepatic fibrosis from those without fibrosis. Twenty-three serum samples from CHC patients were selected according to the degree of hepatic fibrosis as evaluated by the FibroTest: 12 from patients with no hepatic fibrosis (F0) and 11 from patients with extensive fibrosis (F3–F4). The FTIR spectra (ten per sample) were acquired in the transmission mode and data homogeneity was tested by cluster analysis to exclude outliers. After selection of the most discriminant wavelengths using an ANOVA-based algorithm, the support vector machine (SVM) method was used as a supervised classification model to classify the spectra into two classes of hepatic fibrosis, F0 and F3–F4. Given the small number of samples, a leave-one-out cross-validation algorithm was used. When SVM was applied to all spectra (n = 230), the sensitivity and specificity of the classifier were 90.1% and 100%, respectively. When SVM was applied to the subset of 219 spectra, i.e., excluding the outliers, the sensitivity and specificity of the classifier were 95.2% and 100%, respectively. This pilot study strongly suggests that the serum from CHC patients exhibits infrared spectral characteristics, allowing patients with extensive fibrosis to be differentiated from those with no hepatic fibrosis.     

Synthesis of 5-aroylamino-3H-1,3,4-thiadiazole-2-thiones and their tautomerism

5-Aroylamino-3H-1,3,4-thiadiazole-2-thiones 2 have been synthesized by acylation of 5-amino-3H-1,3,4-thiadiazole-2-thione 1 . 5-Aroylamino-3H-1,3,4-thiadiazole-2-thiones can exist in two tautomeric forms — a thiol form and a thione form. On the basis of the ¹³C nmr spectra and additional experimental information, it has been established that the thione form is the stable form in which these compounds exist.     

Modular access to heterocycles: methyl 3-aminobenzo[<Emphasis Type="Italic">b</Emphasis>]thiophene-2-carboxylate–thiourea linkage or pyrimidine-4-one-2-thione formation

Abstract  Modular conditions for the formation of thioureas or pyrimidine-4-one-2-thiones connected to the benzo[b]thiophene, benzene and indole structures were performed. A benzo[b]thiophene isothiocyanate derivative was used as a model to study the condensation with simple aromatic amines and amino-l-sorbose derivative. The construction of pyrimidine-4-one-2-thiones using basic conditions afforded efficiently new heterocyclic aromatics, which were further transformed using the alkylated sulfur as a leaving group in palladium-catalyzed cross-coupling reactions. Graphical abstract        

Synthesis and structure–property relationship of carbazole‐alt‐benzothiadiazole copolymers

A series of four π‐conjugated carbazole‐alt‐benzothiadiazole copolymers (PCBT) were prepared by Suzuki cross‐coupling reaction between synthesized dibromocarbazoles as electron‐rich subunits and 4,7‐bis(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)?2,1,3‐benzothiadiazole as electron‐deficient subunits. The subunits were directly linked through 2,7‐ or 3,6‐ positions of the carbazole. In addition, the carbazole monomers have been N‐substituted by a branched or a linear side‐chain. The chemical structure of the copolymers and their precursors was confirmed by NMR and IR spectroscopies, and their molar masses were estimated by SEC. Thermal analysis under N₂ atmosphere showed no weight loss below 329°C, and no glass transition was observed in between 0 and 250°C. The band gaps of all PCBTs evaluated by optical spectroscopies and by cyclic voltammetry analysis were consistent with expectations and ranged between 2.2 and 2.3 eV. Finally, 2,7 and 3,6 linkages were shown to influence optical properties of PCBTs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2059–2068