Simultaneous spectrophotometric determination of ethinylestradiol and levonorgestrel by partial least squares and principal component regression multivariate calibration

Two spectrophotometric methods for the determination of Ethinylestradiol (ETE) and Levonorgestrel (LEV) by using the multivariate calibration technique of partial least square (PLS) and principal component regression (PCR) are presented. In this study the PLS and PCR are successfully applied to quantify both hormones using the information contained in the absorption spectra of appropriate solutions. In order to do this, a calibration set of standard samples composed of different mixtures of both compounds has been designed. The results found by application of the PLS and PCR methods to the simultaneous determination of mixtures, containing 4–11 μg ml⁻¹ of ETE and 2–23 μg ml⁻¹ of LEV, are reported. Five different oral contraceptives were analyzed and the results were very similar to that obtained by a reference liquid Chromatographic method.     

Reductive Amination of Aldehydes and Ketones with Sodium Triacetoxyborohydride. Studies on Direct and Indirect Reductive Amination Procedures(1)

Sodium triacetoxyborohydride is presented as a general reducing agent for the reductive amination of aldehydes and ketones. Procedures for using this mild and selective reagent have been developed for a wide variety of substrates. The scope of the reaction includes aliphatic acyclic and cyclic ketones, aliphatic and aromatic aldehydes, and primary and secondary amines including a variety of weakly basic and nonbasic amines. Limitations include reactions with aromatic and unsaturated ketones and some sterically hindered ketones and amines. 1,2-Dichloroethane (DCE) is the preferred reaction solvent, but reactions can also be carried out in tetrahydrofuran (THF) and occasionally in acetonitrile. Acetic acid may be used as catalyst with ketone reactions, but it is generally not needed with aldehydes. The procedure is carried out effectively in the presence of acid sensitive functional groups such as acetals and ketals; it can also be carried out in the presence of reducible functional groups such as C-C multiple bonds and cyano and nitro groups. Reactions are generally faster in DCE than in THF, and in both solvents, reactions are faster in the presence of AcOH. In comparison with other reductive amination procedures such as NaBH(3)CN/MeOH, borane-pyridine, and catalytic hydrogenation, NaBH(OAc)(3) gave consistently higher yields and fewer side products. In the reductive amination of some aldehydes with primary amines where dialkylation is a problem we adopted a stepwise procedure involving imine formation in MeOH followed by reduction with NaBH(4).     

Synthesis, characterization, biocide and toxicological activities of di-n-butyl- and diphenyl-tin(IV)-salicyliden-beta-amino alcohol derivatives

The one pot reaction of salicylaldehyde 1, beta-amino alcohols 2a-2c, and di-n-butyltin(IV) oxide 3a or diphenyltin(IV) oxide 3b produced five diorganotin(IV) compounds, 4a-4c, 5a, and 5c, in good yields. All compounds were characterized by IR, (1)H, (13)C, and (119)Sn NMR spectroscopy, and elemental analysis; furthermore, compounds 4b, 4c, 5a, and 5c were characterized by X-ray diffraction analysis. After the structural characterization, all of the compounds were tested in vitro against Bacillus subtilis (Gram-positive, strain ATCC 6633), Escherichia coli (Gram-negative, strain DH5alpha), Pseudomonas aeruginosa (Gram-negative, strain BH3), Desulfovibrio longus (strain DSM 6739), and Desulfomicrobium aspheronum (strain DSM 5918) to assess their antimicrobial activity. Compounds 4 and 5 demonstrated a wide range of bactericidal activities against the tested aerobic (one Gram-positive and two Gram-negative subtypes) and anaerobic bacteria (two sulfate-reducing bacteria, SRB). Compound 5 had better bactericidal performances than compound 4. For all of the compounds, the acute toxicity was measured using luminescent bacteria toxicity (LBT-Microtox) tests to track their further environmental impact. According to these results and in order to fulfill environmental regulations, the toxicity of the compounds studied herein can be modulated through the proper selection of the disubstituted tin(IV) moiety.     

Micellar electrokinetic capillary chromatography for the determination of Viagra and its metabolite (UK-103,320) in human serum

Micellar electrokinetic capillary chromatography (MEKC) was investigated for the determination of Viagra (sildenafil citrate, SC) and its metabolite (UK-103,320) in human serum in a concentration range of clinical interest. For MEKC, human serum samples spiked with SC and UK were obtained directly after elution with methanol from a tC18 cartridge. The extract was evaporated and regenerated in a solution 1 mM of phosphate buffer (pH 12.3) which contained a methanol percentage of 20% that was analyzed using phosphate buffer (pH 12.3, 10 mM) containing 30 mM sodium dodecyl sulfate (SDS) as separation electrolyte and a fused-silica capillary. This method gave satisfactory interday precision with respect to migration times relative standard deviation (RSD < 1%) and linear responses for the concentration ranges investigated (0.50-3.50 mg L(-1) for the compound SC and 0.90-4.60 mg L(-1) for UK). An intraday RSD (n = 5 graphs) between the slopes of the calibration graphs was acceptable (6.40%) for SC and (3.37%) for UK. A satisfactory interday precision between slopes was also obtained (RSD 4.10% for SC and a RSD 2.72% for UK) which demonstrated the ruggedness of this method. Detection limits (S/N = 3) were about 200 ng/mL for both compounds in human serum. MEKC was shown as a good method with regards to simplicity, precision and sensitivity.     

Simultaneous quantification of terpenelactones and flavonol aglycones in hydrolyzed ginkgo biloba extract by liquid chromatography with inline ultraviolet and evaporative light scattering detection

We report here a liquid chromatography (LC) method with inline ultraviolet/evaporative light scattering (UV/ELS) detection for the simultaneous quantification of the terpenelactones and flavonol aglycones in a single sample of hydrolyzed Ginkgo biloba extract (GBE). The sample is hydrolyzed by a rapid and convenient oven heating method for 1 h at 90 degrees C with 10% hydrochloric acid. The 1 h hydrolysis was found to be equivalent to the 2.25 h reflux treatment for dry powder extract, where total flavonol glycosides were 28.4 and 28.1%, respectively. Acceptable precision was achieved for total terpenelactones [relative standard deviation (RSD) = 4.8%] by ELS detection, and total flavonol aglycones (RSD = 2.3%) by UV detection. The analytical range was 1.5 to 7.3% (w/w) for the individual terpenelactones (ELS) and 2.5 to 15.0% (w/w) for the individual glycosides (UV) calculated from the aglycones quercetin, kaempferol, and isorhamnetin. This improved method allows for the first time high throughput sample preparation coupled with the quantification of the predominant compounds generally used for quality control of GBE in a single assay.     

Synthesis of TiO2 nanoparticles on the Au(111) surface

The growth of titanium oxide nanoparticles on reconstructed Au(111) was investigated by scanning tunneling microscopy and x-ray photoelectron spectroscopy. Ti was deposited by physical-vapor deposition at 300 K. Regular arrays of titanium nanoparticles form by preferential nucleation of Ti at the elbow sites of the herringbone reconstruction. The titanium oxide nanoclusters were synthesized by subsequent exposure to O(2) at 300 K. Two-and three-dimensional titanium oxide nanocrystallites form during annealing in the temperature range from 600 to 900 K. At the same time, the Au(111) surface assumes a serrated 110-oriented step-edge morphology suggesting step-edge pinning by titanium oxide nanoparticles. The oxidation state of the titanium oxide nanoparticles varies with annealing temperature. Specifically, annealing to 900 K results in the formation of stoichiometric TiO(2) nanocrystals as judged by the Ti(2p) binding energies measured in the x-ray photoelectron data. The nanodispersed TiO(2) on Au(111) is an ideal system to test the various models proposed for the enhanced catalytic reactivity of supported Au nanoparticles.     

Influence of surfactant addition on the stability of concentrated alumina dispersions in water

The goal of this study was to assess the effects of surfactant addition on the stability and viscosity of concentrated alumina dispersions. The stabilizing effects of several candidate surfactants were investigated for concentrated dispersions of two different pseudoboehmite aluminas at pH 4 and 7. The stabilities of concentrated alumina dispersions treated by pH adjustment alone and by pH adjustment combined with surfactant addition were compared to assess the degree to which the surfactant enhanced stability. The initial rate of mass removal from a sedimenting alumina dispersion was used as a measure of stability.

The anionic surfactants Surfine WNT-A and DOWFAX 3B2 were identified as effective in enhancing the stability of concentrated alumina dispersions. The optimal doses of these surfactants for stabilizing 15% by weight VERSAL™ 250 alumina dispersions at pH 4 were determined to be about 4.6 × 10⁻⁵ mol g⁻¹ for both surfactants. On the basis of the initial rate of mass removal, surfactant-stabilized 15 wt.% suspensions were found to be approximately 2.5 and 10.6 times more stable than similar dispersions stabilized electrostatically by pH adjustment alone. These more stable dispersions exhibited lower viscosities than observed for the alumina dispersions not subjected to surfactant addition. The results indicate that the stability of concentrated alumina dispersions can be enhanced by anionic surfactant addition, and that such surfactants may therefore help to control the rheology of concentrated dispersions of alumina in water.     

Potentiometric determination of fluoride in geological and biological samples following pyrohydrolytic decomposition

A method for the determination of fluoride in coal, coal fly ash, phosphate rock, limestone, mineral clay, fossilised materials, oyster tissue and vegetation using pyrohydrolysis for sample decomposition is proposed. A specific apparatus was constructed and the influence of vanadium pentoxide (V₂O₅) as a catalyst for the pyrohydrolysis reaction was investigated. It was verified that V₂O₅ does not influence the release of fluoride from the vegetation, oyster tissue, coal and coal fly ash matrices analysed. However, the catalyst was necessary for the phosphate rock, fossil bone, mineral clay and limestone samples. Certified and noncertified samples were analysed using an ion selective electrode (ISE) for the analyte detection. Precise (relative standard deviation—R.S.D.<7%) and accurate (recovery in accordance to certified values) results were obtained. The limit of quantification (LOQ) of the method was 5.0 μg g⁻¹ of fluoride using 20 mg of sample and a final dilution to 10 ml. The sample frequency was five samples per hour.     

Separation of proteins with a molecular mass difference of 2 kDa utilizing preparative double-inverted gradient polyacrylamide gel electrophoresis under nonreducing conditions: application to the isolation of 24 kDa human growth hormone

A method for separating proteins with a molecular mass difference of 2 kDa using SDS-PAGE under nonreducing conditions is presented. A sample mixture containing several human growth hormone (hGH) isoforms was initially separated on a weak anion-exchange column. Fractions rich in 24 kDa hGH as determined by analytical SDS-PAGE were pooled and further separated by cation-exchange chromatography. The fractions pooled from the cation-exchange chromatography contained two hGH isoforms with a 2 kDa molecular mass difference according to SDS-PAGE analysis, 22 and 24 kDa hGH. The 22 and 24 kDa hGH were separated using continuous-elution preparative double-inverted gradient PAGE (PDG-PAGE) under nonreducing conditions. The preparative electrophoresis gel was composed of three stacked tubular polyacrylamide matrices, a 4% stacking gel, a 13-18% linear gradient gel, and a 15-10% linear inverted gradient gel. Fractions containing purified 24 kDa hGH were pooled and Western blot analysis displayed immunoreactivity to antihGH antibodies. PDG-PAGE provides researchers with an electrophoretic technique to preparatively purify proteins under nonreducing conditions with molecular mass differences of 2 kDa.