A specific sensitive HPLC method for determination of plasma dopamine

Summary We describe here a sensitive, selective and rapid method to quantitate plasma catecholamines, especially dopamine, using high-performance liquid chromatography with electrochemical detection. This method requires a 10-minute run time and has a threshold for detection of 2 picograms, (10pg/ml).A number of commonly employed mobile phases for catecholamine analysis have been tested and have failed to detect dopamine in biological samples. Neither acetonitrile (3–7%) or methanol, (5–8%) in the mobile phase has produced consistently interpretable data either due to inability to detect or interference from co-eluting substances. Optimal detection was achieved with a mobile phase containing sodium acetate (6.8g), citric acid (5.9g), EDTA (48mg), di-n-butylamine (270l), Na-1-octane sulfate (850mg), methanol (100 ml) (amounts refer to 1 liter aqueous solution) (pH 4.3). The mobile phase was passed through a Waters 5 resolve C₁₈ column using a Waters 590 pump and m460 electrochemical detector and 740 data module, Flow rate was 0.9ml/min. Using this method, normal values in human and swine left ventricular myocardium and human and swine plasma have been established for norepinephrine, epinephrine, and dopamine.     

Development of a tandem cyclization mediated by samarium(II) iodide: sequential intramolecular conjugate addition/nucleophilic acyl substitution

The development of a one-pot tandem intramolecular conjugate addition/nucleophilic acyl substitution using samarium(II) iodide is reported. The reaction relies on the reagent’s unique ability to mediate both radical and anionic pathways, which are likely integral to the mechanism of this transformation. The tricyclic hemiacetal product was formed in good yield, with excellent diastereoselectivity, and its structure was verified by X-ray crystallographic analysis.     

On the regiochemistry of the methylphenylcyclopropenone dimer. A reinvestigation

The regiochemistry of the previously reported dimer of methyhlphenylcyclopropenone is corrected through analysis of the long-range ¹H, ¹³C correlated (COLOC) 2D nmr spectrum.     

On the role of solvent in complexation equilibria. I. The acid-base chemistry of some α,ω-diaminocarboxylic acids in water-dioxane mixed solvents

The macroscopic and microscopic acid-base chemistry of a series of α,ω-diaminocarboxylic acids, H₂N(CH₂)_nCH(NH₂)COOH [n=4, lysine (LYS);n=3, ornithine (ORN);n=2, 2,4-diaminobutyric acid (DAB);n=1, 2,3-diaminopropionic acid (DAP)], was determined in water and its binary mixtures with dioxane (20.5, 40.7, 60.7, and 80.5 mass % dioxane) using carbon-13 nuclear magnetic resonance spectroscopy. The macroscopic acid dissociation constants for the titration of the two ammonium groups decrease uniformly with increasing dioxane composition. The microscopic constants, however, which characterize the relative concentrations of the two tautomers of singly protonated amino acid (I and II) $$\begin{gathered} H_3 \mathop N\limits^ + (CH_2 )_n CHCOO^ - H_2 N(CH_2 )_n CHCOO^ - \hfill \\ || \hfill \\ NH_2 \mathop N\limits_ + H_3 \hfill \\ III \hfill \\ \end{gathered}$$ reveal that while tautomer I is favored in aqueous solution, tautomer II becomes more important with increasing dioxane composition for LYS and ORN. The relative concentrations of I and II remain unchanged with solvent composition for DAP. These results are explained in terms solute-solvent and solvent-solvent interactions.     

Determination of lead in petroleum and petroleum products by atomic absorption spectrometry with a carbon rod atomizer

The use of a carbon rod atomizer for the analysis of lead in petroleum and petroleum products is described. Variables affecting sensitivity studied include: type of lead salt and type of solvent for standard and sample preparation, hydrogen diffusion flame, choice of analytical wavelength and interferences. For the 217.00-nm line, a sensitivity of 1·10^-11 g (absolute) and for the 283.31-nm line, a detection limit of 2·10^-12 g (absolute) are reported. Results of analysis of gasoline, used bunker heating oil, used jet engine lubricating oil, and crude oil for lead content are presented. An organic-to-aqueous solvent extraction system for lead is described.     

Spectroscopic investigations in molecularly organized solvent media. Part 3. Examination of the nitromethane selective quenching rule in aqueous anionic + cationic and anionic + nonionic mixed surfactant solutions

Applicability of the nitromethane selective quenching rule for discriminating between alternant versus nonalternant polycyclic aromatic hydrocarbons (PAHs) is examined for 20 representative PAH solutes dissolved in micellar sodium dodecylsulfate (SDS) + cetyltrimethylammonium bromide (CTAB), SDS + dodecyltrimethylammonium bromide (DTAB), SDS + Brij-35, and SDS + sodium octanoate (SO) mixed surfactant solvent media. Experimental results show that nitromethane quenched fluorescence of all 8 alternant PAHs studied in the four different solvent systems. Unexpected quenching behavior was observed, however, in the case of nonalternant PAHs. Nitromethane quenched fluorescence emission of nonalternant PAHs dissolved in the SDS + SO solvent media, which is contrary to the selective quenching rule. In the case of the mixed anionic + cationic surfactant solvent media, nitromethane quenching selectivity was restored at concentration ratios of approximately 4 : 1 (anionic:cationic) or less. Received: 22 May 1997 / Revised: 29 September 1997 / Accepted: 3 October 1997     

Correlations of13C chemical shifts and geometry modifications

The effect of geometry modifications of¹³C chemical shifts has been investigated in a small subset of molecules using both LO-INDO and Gaussian 70 (4–31) calculations. The Gaussian calculations, while known to give poor absolute shifts, compare well to the reparameterized semi-empirical INDO determinations in calculated shift changes. In virtually all cases the signs of the shift changes were found to be opposite to that of the changes in the calculated electronic energy.     

An order-disorder transition in Sr2IrD5: Evidence for square pyramidal IrD5 units from powder neutron diffraction data

Neutron diffraction data have been collected on a powdered sample of Sr₂IrD₅ over a range of temperatures. The compound, which is cubic at room temperature, has been found to exhibit a gradual transformation to a tetragonal phase in the temperature range 200-140 K. As a result of the transition, deuterium atoms which randomly occupy sixfold positions in the cubic phase, become tetragonally ordered. A small fraction of the cubic phase remained untransformed at 4.2 K. Both the cubic and tetragonal structures are consistent with square pyramidal IrD₅ units with average Ir---D distances of 1.714 and 1.718 Å, respectively. Agreement factors, R₁, for the two structural analyses are 3.44 and 4.94%.     

Model-free kinetics applied to regeneration of coked alumina

Thermogravimetry is proposed to study the alumina catalyst regeneration deactivated by coke, after being used in the transformation of styrene in a fixed bed continuous flow reactor. The model-free kinetic approach has been applied to data for the thermal oxidation of carbonaceous deposits on the catalyst. The activation energy (E) was calculated as a function of a (conversion) and T (temperature), by using Vyazovkin model-free kinetic method, allowing to estimate time required to remove coke at a given temperature. This revised version was published online in August 2006 with corrections to the Cover Date.     

Alternating iteration and elliptic variational inequalities

Summary Free boundary value problems, too complicated for formulation as a variational inequality, are broken up into two problems on overlapping regions. On one region the problem is treated as an ordinary boundary value problem; on the second region, the free boundary part of the problem is reduced to a variational inequality. By solving the two problems successively it is shown that under certain conditions the successive solutions converge to a single function that gives a solution of the original problem. Application to a filtration problem is given.